Hewlett-Packard Surestore Tape Library Model 20/700 Installation Notes

Download Installation notes of HP 20/700 Storage for Free or View it Online on All-Guides.com.

Brand: HP

Category: Storage

Type: Installation notes for HP 20/700

Pages: 8 (0.67 Mb)

Download HP 20/700 Installation notes

HP 20/700 Installation notes - Page 1
1
HP 20/700 Installation notes - Page 2
2
HP 20/700 Installation notes - Page 3
3
HP 20/700 Installation notes - Page 4
4
HP 20/700 Installation notes - Page 5
5
HP 20/700 Installation notes - Page 6
6
HP 20/700 Installation notes - Page 7
7
HP 20/700 Installation notes - Page 8
8
62108 1
HP Surestore Tape Library 20/700
A5605A Expansion Frame Installation Guide
(for HP field service use only)
CAUTION: The HP tape library Expansion Frame is not customer installable or
replaceable. Any servicing, adjustment, maintenance or repair must be performed only
by authorized HP service-trained personnel.
Note to Customer Engineer: This installation may add new technology to the library
that older user’s guides do not address. Please remind the customer that the latest user
documentation is available from the HP Customer Care website: http://www.hp.com/go/
support.
Materials Included
Installation Notes
Confirm with the customer System Administrator that the tape library can be powered
off.
Observe proper power down and power on procedures, as described in the
Installation or Service Manual.
If you install or replace an Expansion Module you must check mark the appropriate
box on the Drive Location Label. The Drive Location Label is located on the inside of
the library door, just below the UL label.
Heavy Load. At least three people are required to remove the Expansion Frame from
packaging and push it into position.
Tools Required
Prior to beginning the installation process, obtain the following tools:
1/4-inch Ratchet Wrench
Table 1. Materials List
Part Quantity
I/I Expansion Frame 1
Expansion Frame Assembly 1
1/4-20 x 1/2-in. Torx Screws 6
Lock Down Latch Tool 1