Hewlett-Packard Media Center m400 - Desktop PC Troubleshooting Tips

Download Troubleshooting tips of HP Media Center m400 - Desktop PC Desktop, Digital Camera for Free or View it Online on All-Guides.com.

HP Media Center m400 - Desktop PC Troubleshooting tips - Page 1
1
HP Media Center m400 - Desktop PC Troubleshooting tips - Page 2
2
HP Media Center m400 - Desktop PC Troubleshooting tips - Page 3
3
HP Media Center m400 - Desktop PC Troubleshooting tips - Page 4
4
Troubleshooting Tips for the
HP Media Center PC
Please read the following information regarding the HP Media
Center PC and keep it with your guides for future reference:
Send/Don’t Send error message
Capturing analog video with ArcSoft ShowBiz
Changing channels with a set-top box with four-digit
channel entry (DISH Network)
Do not put PC into manual standby with Media Center
open
Disk Full error message
Vertically stretched DVD playback
No Automatic Television Program Guide download with
dial-up modem
If you forget Parental Control Password
Postal Code results do not match my channels in
Television Program Guide (Europe only)
Converting recorded TV to MPEG-2 format (Europe only)
For more information, search the Microsoft
®
Web site
(http://www.support.microsoft.com) for Knowledge Base articles
and updates on Microsoft
®
Windows
®
XP Media Center Edition
2004.
You can also go to http://www.hp.com for updates and software
patches. Search for your model number in the Support section of
the Web site.
HP may send updated information or patches to your desktop
(not available in all countries/regions). You must be connected to
the Internet to receive these updates. If you have turned off the
Updates from HP feature, you will not receive these updates. To turn
it back on click
Start, All Programs, PC Help & Tools, Updates
from HP
, and Re-enable Updates from HP.
Send/Don’t Send error message
If you get an error message with Send and Don’t Send options,
close the dialog box by clicking
Send or Don’t Send. Continue
with your tasks. For best performance, we recommend that you
restart your PC at a convenient time, by clicking
Start on the
desktop taskbar, and then clicking
Turn Off Computer, then
Restart.
Capturing analog video with ArcSoft ShowBiz
You must set up the Media Center application before you can
capture analog video with ArcSoft
®
ShowBiz
®
. If you have not used
Media Center yet, to start the setup wizard, open Media Center by
clicking the Windows icon on your remote control; or by clicking
the
Start button on your desktop taskbar, then Media Center;
or by clicking the
Media Center icon on your desktop.
You cannot run Media Center and capture analog video at the
same time, since they use the same TV-Tuner card.
To capture analog video in ArcSoft ShowBiz or other video capture
applications, make sure no TV recordings are in progress and no
TV programs are scheduled to record while you are capturing
video, then close Media Center.
If you still cannot capture analog video, or if you receive an error
message stating the device is in use, restart the PC and try again.
To restart the PC, click
Start on the desktop taskbar, then click
Turn Off Computer, then Restart.
Astuces de dépannage pour
l’ordinateur HP Media Center
Nous vous invitons à prendre connaissance des informations
suivantes concernant l’ordinateur HP Media Center et de les
conserver avec les autres manuels afin de pouvoir vous y référer
ultérieurement:
Messages d’erreur avec les options Envoyer et Ne pas
envoyer
Capture de vidéo analogique avec ArcSoft ShowBiz
Changement de chaîne avec un boîtier décodeur de
réception possédant une saisie à quatre chiffres
(DISH Network)
Ne pas placer l’ordinateur en mode de veille manuelle
lorsque le programme Media Center est en cours
Message d’erreur de disque saturé
Image de lecture DVD étirée verticalement
Aucun téléchargement automatique du Guide des
programmes TV avec le modem via ligne téléphonique
(accès par réseau commuté)
En cas d’oubli du mot de passe de contrôle parental
Les résultats du code postal ne correspondent pas à mes
chaînes du Guide des programmes TV (Europe
uniquement)
Conversion des émissions de télévision enregistrées vers
le format MPEG-2 (Europe uniquement)
Pour plus d’informations, rendez-vous sur le site Web de Microsoft
®
(http://www.support.Microsoft.com) et faites des recherches sur les
articles et mises à jour concernant Microsoft
®
Windows
®
XP
Media Center Édition 2004 dans la base de connaissances
(Knowledge Base).
Vous pouvez également visiter le site http://www.hp.com pour des
mises à jour et des correctifs logiciels. Cherchez le numéro du
modèle de votre ordinateur dans la section Support technique du
site Web.
Il se peut qu’HP envoie des informations mises à jour ou des
correctifs sur votre bureau (option non disponible dans tous les
pays/régions). Vous devez être connecté au réseau Internet pour
recevoir ces mises à jour. Si vous avez désactivé la fonction Mises
à jour HP, vous ne recevrez pas ces mises à jour. Pour la réactiver,
cliquez sur
démarrer, Tous les programmes, Outils et Aide,
Mises à jour HP, puis sur Réactiver Mises à jour HP.
Messages d’erreur avec les options Envoyer et Ne
pas envoyer
Si vous recevez un message d’erreur avec les options Envoyer et
Ne pas envoyer, fermez la boîte de dialogue en cliquant sur
Envoyer ou Ne pas envoyer. Continuez avec vos tâches. Pour une
performance optimale, nous recommandons de redémarrer votre
ordinateur à un moment opportun pour vous en cliquant sur
démarrer dans la barre des tâches du bureau, puis en cliquant
sur Arrêter l’ordinateur, puis sur Redémarrer.