• Home
• Brands
• HP Manuals
• HP D5970A - NetServer - LCII
• Hewlett-Packard D7171A - NetServer - LPr Introduction Manual

Hewlett-Packard D7171A - NetServer - LPr Introduction Manual

Download Introduction manual of HP D5970A - NetServer - LCII Adapter, Computer Accessories for Free or View it Online on All-Guides.com. This version of HP D5970A - NetServer - LCII Manual compatible with such list of devices, as: D5970A - NetServer - LCII, LC2000r - NetServer - 128 MB RAM, LH3000r - NetServer - 128 MB RAM, D7171A - NetServer - LPr, LH6000r - NetServer - 0 MB RAM

1

2

3

4

5

6

7

8

9

10

HP NetServer LXr 8000

with

HP A3661B High Availability Disk Array Model 30 / FC

Cluster Configuration Guide

13 September 1999

Introduction

This document defines the supported HP NetServer LXr 8000 and A3661B High Availability Disk Array

Model 30/FC (LXr 8000 / Model 30-FC) configurations for Microsoft Cluster Server. These

configurations minimize single points of failure (SPOF), provide maximum availability, and have been

certified by Hewlett-Packard and Microsoft. This guide is prescriptive; it describes the configurations

supported by HP. Any deviance to these configurations can result in an inoperative cluster or an operating

cluster with degraded performance, hidden SPOFs, etc., and therefore will not be supported by HP.

What’s Defined in a Racked Cluster

Cluster

SPUs

Local and Shared Storage

Intra-cluster and Client LANs

Shared Storage Cabling

Cluster

Type of SPUs HP NetServer LXr 8000

Each node must be the same model SPU, but may have different clocks

speeds, main memory sizes, cache sizes, and number of CPUs (2, 3, or 4).

Number of nodes 2

Shared Storage See Shared Storage below.

LANs:

Client LAN Any NIC that is HP and Microsoft approved. See Client LAN below.

Intra-cluster

(Heartbeat) LAN

HP D5013A only with crossover cable. See Intra-cluster LAN below.

Power source Direct from power mains, power conditioner or uninterruptible power

supply (UPS) using any power conditioner or UPS.