Haier HG-M150 User Manual

Download Operation & user’s manual of Haier HG-M150 Cell Phone for Free or View it Online on All-Guides.com.

Brand: Haier

Category: Cell Phone

Type: Operation & user’s manual for Haier HG-M150

Pages: 2 (0.28 Mb)

Download Haier HG-M150 Operation & user’s manual

Haier HG-M150 Operation & user’s manual - Page 1
1
Haier HG-M150 Operation & user’s manual - Page 2
2
2
3
5
6
7
4
1
Safety Instructions
These instructions are intended for safe and effective use of your phone. Please
follow these guidelines. Failure to do so might cause the product to malfunction or
even a potential hazard to your health.
Do not use your mobile phone while driving. Park the car before making a call.
Turn off your phone when refueling.
Do not use your phone near a gas station, flammable, or chemical substances.
Warning! It may explode when exposed in fire.
Do not use your phone during a flight, it is dangerous.
Do not use your phone near medical equipments like pacemaker and hearing aids
without requesting permission from the physician or medical staff.
Radio signals may affect the performance of the phone.
Do not touch any exposed parts of the antenna during a call; otherwise it will
affect the call reception and waste battery power.
Do not attempt to disassemble or modify the phone by yourself. Only authorized
personnel should perform this service.
When you connect accessories to your phone, please read the safety guidelines
carefully.
Do not use unauthorized products.
Please use only the original accessories or products that are authorized by our
company.
Keep out of children's reach.
PIN
PIN (Personal Identity Number), usually provided to a SIM Card by the network
operator.
If you enter the wrong PIN three times in a row, it will be locked. You need to enter
your PUK (Personal Unblocking Key) number to unlock. Please contact your network
operator for more details.
PIN2 is provided to some SIM. If you enter the wrong PIN three times in a row, it will
be locked. You need to enter your PUK2 to unlock. Please contact your network
operator for more information.
PUK (Personal Unblocking Key) is used to unblock the PIN. PUK is provided to a SIM
card. If you lose or forget the password, contact your network operator.
Protects your phone against unauthorized use. You can turn on the Phone code for
your personal security use.The original code is "0000".
1.Press and hold key to turn on the phone. The LCD screen will turn on.
2.If SIM card is not properly installed, a warning prompt will appear on the screen.
Press and hold key to turn off, and re-install the SIM card properly.
PIN2
PUK
Phone code
General Features
Turn on the phone
Phone Overview (Picture for reference only)
3. If you have set a phone password, you will be asked to enter your password.
4.If your SIM card is protected by PIN, the phone will instruct you to enter the PIN
number.
5.You will be asked to enter the PUK number if SIM card is locked.
6.The phone will search for network automatically after turned on.
If the phone has found an authorized network operator, the name of the network and
signal intensity will be displayed.
If not, you can only use the emergency calls and other non-communication service.
In standby, enter a phone number (with region code and area code), Press key to
delete a wrong entry. Then press key to dial the number. When the call gets
connected, the call status will be displayed.
When you have incoming call, press key to reject it.
When a call comes in, phone will ring and/or vibrate. It will show the caller's name if
the network support it. The caller's name display depends on whether you have saved
it in your phonebook. Press key to answer, or press Option -> Accept.
When you have finished talking, press key to end a call also, you can press
Warning!
To make Domestic calls
To reject a call
To answer a call
To end a call conversation
Getting Started
Inserting SIM card and Battery
Taking out the battery
Charging the Battery
WARNING!
Keep SIM Card out of children's reach.
Any abrasions or bend might easily cause damage. Please take extra care.
Make sure the phone is power off when you remove the SIM Card.
Remove the battery cover by sliding downward.
facing down.
Remove the battery cover. Insert your fingernail at the bottom slot of the battery
compartment and then pull out the battery.
Insert the SIM Card into the sim card slot with the contacts
Place the battery into place. Make sure that the charge pins are in contact with the
battery terminals.
Slide the battery cover until it locks into place.
Insert the connector of the charger into the top-left side of the phone (Note: Ensure
that the charger connector is plugged in.
Plug the charger into the AC wall outlet.
When the power comes on, “Charging…” will be displayed on the LCD screen, and
the battery indicator will start to scroll. It will only stop after the battery comes to full
key if you want to terminate a call after you dialed.
You do not need to own a SIM card to make emergency calls.
Emergency calls may differ from different network operators, please contact your
network operator to get your local emergency call number.
To make a international call, press and hold 0 to switch until a + sign appear.
Then enter the country/region code, area code (without the first zero), and the phone
number:
After you have entered the + sign, enter the country code and the number you want to
dial. For example, 49 for Germany, 44 for UK, 46 for Sweden, 86 for China.
Ex.: dial +8613798297223, when making an international call to China.
As you dial a common international call, you don't have to enter the 0 of the city code.
Find the number you want to call in your phone book, press key to automatically
dial the displayed contact.
All the numbers that you have dialed are saved in the calls record. When the calls
memory turns full, the old numbers are automatically deleted. To scroll the call list:
1. In standby, press key. The call records will display starting from the most
recently called number. Press key to automatically dial the displayed record.
Emergency calls
To make an international call
To dial from contacts
To dial from the Call list
charge. If a battery is completely discharged, it may take a few minutes before the
charge indicator appears on the LCD screen.
After charging is completed, disconnect charger from phone and the socket of the
alternating current.
When charging, please place the phone in an environment that has a normal room
temperature and good ventilation. It is recommended to charge the phone in an
environment with a temperature that ranges from 5 ~40 . Please ensure to use
only the charger offered by the manufacturer. Using unauthorized charger may cause
danger and violate the authorization of the phone and the guarantee article.
When the phone automatically turns off or indicates the alarm information of power
shortage, please charge the battery in time.
The duration time of the standby and conversation of the phone offered by
manufacturer is based on ideal working environment. In may vary according to the
network condition, working environment, and application methods.
Notice:
Warnings!
Do not take the battery out when it is being charged.
To ensure best performance, please use original accessories. Using any
unauthorized accessories may affect your mobile phone's performance.
Personal data and settings in your phone and SIM card might lose when you take out
the battery.
Security number
HG-M150
USER MANUAL
USER MANUAL
Left Soft key
Right Soft key
Answer/Dial key
End/Power key
Navigation key
Activates/selects the menu
function at the left bottom
side of the LCD screen.
Activates/selects the menu
function at the right bottom
side of the LCD screen.
Dials and answers calls. In
standby mode, press to
view recently dialed calls.
Ends or reject calls;
Power on/Power off;
In the menu programming,
press to return to standby
mode.
In standby mode, press;
Left-Date & time setting.
Right-Create message.
Down-Contact list.