Grizzly H6189 User Manual
Download Instruction sheet of Grizzly H6189 Other for Free or View it Online on All-Guides.com.
Introduction
• 230 RPM free speed
• 30 ft/lbs maximum torque
• 90 PSI operating pressure
• 5 CFM average air consumption
• 92 dB(A) sound level
•
1
⁄4" Air inlet
• Forward and reverse
• Short, ergonomic profile
Inventory
A.
1
⁄4" Industrial Air Ratchet ............................. 1
Operation
Install any
3
⁄8" drive socket onto your air ratchet.
Choose from clockwise (R) to tighten, or coun
-
terclockwise (L) to loosen by turning the direc
-
tion control on top of the ratchet. Connect the air
ratchet to your regulated air source.
MODEL H6189
3
⁄8" INDUSTRIAL AIR
RATCHET
INSTRUCTION SHEET
Figure 1. Model H6189
Figure 2. Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPYRIGHT © JUNE, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8327 PRINTED IN TAIWAN
Air ratchet MUST have 3-4 drops of air tool oil
directly dropped into the air fitting before each use
as shown in Figure 2
.
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service!
EYE/EAR INJURY HAZARD!
Wear safety glasses and
hearing protection during
use of this tool!
DO NOT EXCEED 120 PSI!
Personal injury could
occur.