ARX AFW-1 Application Notes

Download Application notes of ARX AFW-1 Desktop, Processor for Free or View it Online on All-Guides.com.

Brand: ARX

Category: Desktop , Processor

Type: Application notes for ARX AFW-1

Pages: 2 (0.08 Mb)

Download ARX AFW-1 Application notes

ARX AFW-1 Application notes - Page 1
1
ARX AFW-1 Application notes - Page 2
2
Application Notes
Application Notes
AFW-1
What is the Anti Feedback Workstation?
Well, basically it is the best of both worlds!
Graphic Equalizers are great products, and are
extremely useful tools for professional audio engi-
neers. But, they do require a fair degree of knowl-
edge to operate them successfully.
Feedback Exterminators are great, too, because
they automatically find frequencies that are feeding
back and pull them down. But, that’s all they do.
You can’t tune the system with them - for that, you
need an equalizer, usually a Graphic Equalizer.
In the ARX AFW-1 Anti-Feedback Workstation,
we’ve combined the two products described above,
to give users the best of both worlds. An equalizer,
to tune the sound of the room/system, and an FBX
Anti Feedback to automatically pull out any feed-
back.
And, as a very useful added bonus, we’ve includ-
ed a fast, smooth sounding Peak Limiter to ensure
that the signal stays within the level that you de-
cide.
10dB cut or boost. The Q of the filter has been spe-
cifically optimised to allow easy combining of the
filters. This enables you to set up a musical, notch
free system curve.
It's quite possible to use this section as a stand-
alone EQ, but then you'd be missing out on some of
the AFW-1's very exciting features!
Using the EQ section
The idea behind the EQ section is to ‘tune’ the room
to the system, and to ‘tweak’ the response a little so
that it sounds good. We’re not going to use it to notch
out feedback - we’ve got the Anti Feedback section
for that - but to adjust the overall sound of the sys-
tem so it doesn’t sound ‘boomy’ or ‘harsh’.
So, play a tape or CD that you’re very familiar
with, and adjust the sliders on the EQ section so that
the system sounds ‘just right’.
Note that a little EQ is a lot, so use each fader
gently. Avoid any sudden dips or peaks - that’s not
what it’s there for. The look of the sliders should
resemble a smooth curve. If you don’t need to move
it, then leave it.
Avoid too much boost at lower frequencies. Very
few systems can deliver much response below 30
Hz, so it’s pointless pushing those sliders up. It will
only waste valuable amplifier power. However 50
to 100Hz can often benefit from a little boost, as can
8 – 12.5KHz. Between those points it should be a
smooth succession of gentle curves.
The Anti Feedback section
The Anti Feedback section of the AFW-1 is essential-
ly a computer controlled parametric equalizer which
continuously searches for feedback. Once feedback
is detected, it extinguishes the feedback automati-
cally by inserting a very narrow notch filter directly
on the feedback frequency, only as deep as neces-
sary to control the feedback. It finds and eliminates
feedback typically in less than one second.
The result is that the overall program gain is in-
creased 6 or more dB and provides much clearer and
more natural sounding speech and music. And since
it is fully automatic, no operator is required once it
has been set up.
The digital filters inside the AFW-1 are switch-
able between 1/5th octave and 1/10th octave. 1/5th
is recommended for speech applications, such as
So, as you can see, although it may look a little
like a 30 band Graphic Equalizer, it's a whole lot
more. Since it involves a few radical departures from
the normal way that we think of equalizers, we've
put together these Application Notes to familiarise
you with the workings and the concepts behind the
ARX AFW-1 Anti-Feedback Workstation.
Let’s work our way through the operation of the
AFW-1, from start to finish.
The Equalizer Section
The EQ section of the AFW-1 has been designed with-
out compromise as a totally accurate professional
third octave equalizer, with innovative ‘Constant Q’
circuitry. Constant Q is a true WYSIWYG (What You
See Is What You Get) design concept that allows far
more accuracy in EQ control.
Each of its 30 smoothly damped, centre ground-
ing sliders can be adjusted to give a maximum of
www.arx.com.au