Sony XM-1002-HX Marketing Specifications Specifications

Download Specification sheet of Sony XM-1002HX Amplifier, Car Amplifier for Free or View it Online on All-Guides.com.

Brand: Sony

Category: Amplifier , Car Amplifier

Type: Specification sheet

Model: Sony XM-1002HX , Sony XM-1002-HX Specifications

Pages: 2 (0.48 Mb)

Download Sony XM-1002HX Specification sheet

Sony XM-1002HX Specification sheet - Page 1
1
Sony XM-1002HX Specification sheet - Page 2
2
22
2000 MOBILE PRODUCT GUIDE PART 2
Specifications
Circuit System
Inputs
Outputs
Speaker Impedance
Rated Outputs (at 14.4 VDC)
Hi-Current/Hi-Voltage:
Frequency Response
Harmonic Distortion
Input Level Adjustment Range
High-Pass Filter
Low-Pass Filter
Low Boost
Power Requirements
Power Supply Voltage
Current Drain
Dimensions (w/h/d)
Weight
Supplied Accessories
OTL (output transformerless) Circuit
Pulse Power Supply
RCA Pin Jacks
High Level Input Connector
Speaker Terminals – through out pin jacks
1-8 ohms (stereo)
2-8 ohms (when used as bridging amplifier)
50/100 W x 2 (20-20 kHz, 0.04% THD), at 4 )
70/140 W x 2 (20-20 kHz, 0.1% THD), at 2 )
140/280 W x 1 (20-20 kHz, 0.1% THD), at 4 )
5-50 Hz (+0.5/-3 dB)
0.005% or less (at 1 kHz, 4 )
0.2-4.0 V (RCA pin jack);
0.4-8.0 V (High level input)
50-200 Hz, -12 dB/oct
50-200 Hz, -12 dB/oct
0-10 dB (40Hz)
12 V DC car battery (negative ground)
10.5-16 V
At rated output: 26A (4 ohm hi voltage mode)
Remote input: 2 mA
Approx. 282 x 50 x 320 mm (11
1
/8 x 2 x 12
5
/8 in.) (not incl. projecting parts and controls)
3.3 kg (7 lb. 4 oz.) (not including accessories)
Mounting Screws (4); Terminal Cap (1)
XM-1002HX
2/1 Channel Amplifier
MOSFET Switching Power Supply
Switchable Hi Power/Hi Current Mode
Variable 50-200 Hz Hi-Pass/Lo-Pass Filter
40 Hz EQ Boost, Hi Level In
RCA Passthrough
100 W x 2 Ch at 0.04% THD
280 W x 1 Ch at 0.1% THD
140 W x 2 into 2 ohms at 0.1% THD
Discrete Dual Differential Inputs
Discrete MOSFET Outputs
Design and specifications subject to change without notice.