ART M-TWO Datasheet
Download Datasheet of Art M-TWO Other for Free or View it Online on All-Guides.com.
1
2
Cardioid Condenser
Microphone
Features:
▲ Wide Diaphragm Cardioid Condenser Microphone
▲ Dual Position -6dB & -12dB Pad Switches
▲ Dual Position -12dB/Octave 100Hz & 200Hz
Low Frequency Roll-Off Switch
▲ Extremely W
arm, Smooth-Sounding Low Noise
Circuit Design
▲ Extremely Wide Dynamic Range
▲ Dual 32mm Low Mass Gold Sputtered
Diaphragm Capsule
▲ Aluminum Carrying Case & Deluxe Cradle
Shockmount Included
Designed in the USA • Made in China
Visit us at: www.artproaudio.com or email us at: [email protected]
The ART M-Two is one of the most versatile compact side-address
wide diaphragm condenser microphones available. A cardioid
polar pattern with two position pad and two position low
fr
equency r
oll-off switches make it the ideal studio condenser
microphone for solo vocal or instrument recordings where
subtlety and clarity is paramount.
As a cardioid condenser microphone the M-Two picks up only
sound directly in front of the microphone while sounds from
sides and back of the micr
ophone ar
e r
ejected increasing
isolation and delivering controlled directionality.
In live sound and r
emote r
ecor
ding applications, the M-Two’s
cardioid pattern offers excellent feedback rejection and better
isolation and will give you the best results on most vocal
applications and a wide range of solo instruments including
background brass and woodwinds, acoustic stringed instruments
(violin, viola and cello), drums and percussion. It offers full
fr
equency r
esponse at the front of the microphone with a very
controlled and predictable proximity effect – the increased low
frequency response when the microphone is placed close to
sound source.
V
ocalists can use the pr
oximity effect to their advantage, adding
fullness and more 'bottom end' to the voice. Experienced
vocalists can easily incorporate it as part of their overall
micr
ophone technique.
Note: The cardioid symbol on the microphone housing denotes
the 'live side', or front face of the microphone that in all cases
should face the performer.
Contr
ols on the micr
ophone itself include a -6 & -12dB pad switch,
allowing distortion-free reproduction of extremely loud at-source
signals, and a two position -12dB/octave low frequency roll off at
100Hz & 200Hz that r
educes unnecessary low end 'boominess'
and low frequency interference.
As a condenser micr
ophone, the AR
T M-Two requires phantom
power to operate. A subtle recessed LED under the gold cap
sule