Smeg SDR575XG5 Instructions For Use Manual

Download User manual manual of Smeg GCS70XG Cooktop for Free or View it Online on All-Guides.com. This version of Smeg GCS70XG Manual compatible with such list of devices, as: SR876PGHO, SRV576EB5, SRV576TF5, SRV876AS6, SRV876D-5

Smeg GCS70XG User	manual	manual - Page 1
1
Smeg GCS70XG User	manual	manual - Page 2
2
Smeg GCS70XG User	manual	manual - Page 3
3
Smeg GCS70XG User	manual	manual - Page 4
4
Smeg GCS70XG User	manual	manual - Page 5
5
Smeg GCS70XG User	manual	manual - Page 6
6
Smeg GCS70XG User	manual	manual - Page 7
7
Smeg GCS70XG User	manual	manual - Page 8
8
Smeg GCS70XG User	manual	manual - Page 9
9
Smeg GCS70XG User	manual	manual - Page 10
10
Smeg GCS70XG User	manual	manual - Page 11
11
Smeg GCS70XG User	manual	manual - Page 12
12
Smeg GCS70XG User	manual	manual - Page 13
13
Smeg GCS70XG User	manual	manual - Page 14
14
Smeg GCS70XG User	manual	manual - Page 15
15
Smeg GCS70XG User	manual	manual - Page 16
16
Smeg GCS70XG User	manual	manual - Page 17
17
Smeg GCS70XG User	manual	manual - Page 18
18
Instructions for the installer
33
6 FINAL OPERATIONS
Having carried out the above adjustments, reassemble the appliance
following, backwards, the instructions in paragraph “
5.1 Removing the
hob”.
6.1 Regulation of minimum for natural gas
Replace the components on the burner and
slide the knobs on the gas tap pins. Light the
burner and set it at minimum position. Remove
the knob and turn the regulation screw inside or
next to the gas tap pin (depending on the
model) until you get a suitable minimum flame.
Replace the knob and check burner flame
stability: (rapidly turning the knob from
maximum to minimum position, the flame
should not go out).
6.2 Regulation of minimum for LPG
To regulate the minimum for LPG, completely tighten (clockwise) the
screw inside or next to the gas tap pin (depending on the model).
The diameters of the by-passes for each burner are given in table “
5.2
Regulation for LPG”.
After having regulated the device with a gas other than the one tested,
replace the label located on the bottom enclosure with the one that
corresponds to the new gas. The label is inside the bag that contains
the nozzles.