• Home
• Brands
• Snapper Manuals
• Snapper EI55223
• Snapper EI55223 Safety Instructions & Operator's Manual

Snapper EI55223 Safety Instructions & Operator's Manual

Download Safety instructions & operator's manual of Snapper EI55223 Blower, Snow Blower for Free or View it Online on All-Guides.com. This version of Snapper EI55223 Manual compatible with such list of devices, as: EI55223, EI7243, EI55224, EI7244

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

2

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This powerful machine is capable of amputating hands and feet and can throw objects that can cause injury

and damage! Failure to comply with the following instructions may result in serious injury to the operator or

other persons. The owner of the snow thrower must understand these instructions and, furthermore, must

allow only persons who understand these instructions to operate snow thrower. Each person operating the

snow thrower must be of sound mind and body and must not be under the influence of any substance, which

might impair vision, dexterity, or judgment. If you have any questions pertaining to your snow thrower which

your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER,

McDonough, Georgia 30253. Phone: 800/935-2967.

PROTECTION FOR CHILDREN

Tragic accidents can occur if the operator is not alert

to the presence of children. Children are often

attracted to the machine and the snow removal

activity. Never assume that the children will remain

where you last saw them.

1. DO NOT allow children in the area when snow

thrower is being operated.

2. DO NOT allow pre-teenage children to operate

snow thrower.

3. ALLOW only responsible adults and teenagers

with mature judgment to operate the machine

and then only after being thoroughly instructed

and under the close supervision of an

experienced adult operator.

4. Keep the area clear of all persons, particularly

small children and pets.

5. Know how to STOP the snow thrower and

disengage the controls quickly.

PREPARATION

1. Warn everyone in advance to stay clear of area.

Keep especially watchful for children and pets

darting into area while operating.

2. Read, understand, and follow instructions and

warnings in this manual and on the machine.

Know the controls and the proper use of the

snow thrower before starting.

3. Data indicates that operators, age 60 and above,

are involved in a large percentage of snow

thrower-related injuries. These operators should

evaluate their ability to operate the snow thrower

safely enough to protect themselves and others

from serious injury.

4. Disengage all clutches and shift into neutral

before starting the engine (motor).

5. Wear adequate winter clothing including boots

which will give you maximum footing on slippery

surfaces. Exercise CAUTION to avoid slipping or

falling.

6. Before the first snow fall, check the area to be

cleared and remove all objects such as

doormats, sticks, toys, wires, rocks, etc., which

could be hurled or jam the snow thrower

PREPARATION

(Continued From Previous Column)

7. Survey the area to be cleared beforehand and

plan where snow is to be blown. Be prepared to

release auger/impeller clutch or to change

discharge chute direction quickly to discharge

away from windows, cars, buildings and

doorways to avoid property damage or personal

injury from hurled objects.

8. Use only approved extension cords and

receptacles in good condition and with sufficient

capacity to carry the current to the machine if

equipped with electric starting motors.

9. Handle fuel with extra care. Fuels are flammable

and vapors are explosive. Store only in an

approved fuel container. Never remove fuel cap

or add fuel with the engine running. Add fuel

outdoors only with the engine stopped and cool.

Clean spilled fuel and oil from machine. DO NOT

smoke. DO NOT run engine indoors.

OPERATIONAL PRECAUTIONS

1. Before starting, make visual check to make sure

auger/impeller housing is clear and all guards

and shields are in place and tight.

2. DO NOT operate machine without proper guards

shields, deflectors, or other safety protective

devices in place and functioning properly.

3. Should the auger/impeller become clogged,

release the auger/impeller clutch control and, as

an additional precaution, STOP the engine

before attempting to unclog the auger/impeller or

discharge chute.

4. DO NOT attempt to unclog the auger/impeller or

discharge chute by reaching in with your hands.

Use a long stick or similar implement to unclog.

5. DO NOT attempt to unclog the auger/impeller or

discharge chute with the engine running. STOP

engine and remove key.

6. STOP engine (motor) and remove key before

leaving the operator position for any reason.