SMEG CA12SHRPX Instructions Manual

Download Instructions manual of Smeg CA12SHRPX Other for Free or View it Online on All-Guides.com. This version of Smeg CA12SHRPX Manual compatible with such list of devices, as: CA90EPX8, CA90EX8, CA9EX, CA9SHRX, KD100B

Brand: Smeg

Category: Other

Type: Instructions manual

Model: Smeg CA12SHRPX , Smeg CA12SHRX , Smeg CA12SRPX , Smeg CA12SRX , Smeg CA60EPX , Smeg CA60EPX8 , Smeg CA60EX , Smeg CA60EX8 , Smeg CA6EX , Smeg CA6SHRX , Smeg CA6SRX , Smeg CA70EPX , Smeg CA70EPX8 , Smeg CA70EX , Smeg CA70EX8 , Smeg CA90EPX , Smeg CA90EPX8 , Smeg CA90EX , Smeg CA90EX8 , Smeg CA9EX , Smeg CA9SHRPX , Smeg CA9SHRX , Smeg CA9SRPX , Smeg CA9SRX , Smeg CA9X , Smeg CAV9X , Smeg CAV9XB , Smeg CPE400X , Smeg CSED65X , Smeg CSED75X , Smeg CSED95X , Smeg CSEM90X , Smeg CSEM90X8 , Smeg DH1016S , Smeg DH1018S , Smeg DH1021S , Smeg DH1021S12 , Smeg DH1021S1A , Smeg DH1022S , Smeg DH1026S , Smeg DH1030S , Smeg ES3000T , Smeg K135X , Smeg K2-AUS , Smeg K200X , Smeg K200X-1 , Smeg K2A , Smeg K300X , Smeg K3020 , Smeg K3A , Smeg K42A , Smeg K42B , Smeg K42G , Smeg K42X , Smeg KA1VA , Smeg KA1VA2 , Smeg KA1VG , Smeg KA1VP , Smeg KA1VP9 , Smeg KA9X , Smeg KA9X-1 , Smeg KAP1200HX , Smeg KAP1200X , Smeg KAP1200XT , Smeg KAP600HX , Smeg KAP600X , Smeg KAP700X , Smeg KAP800X , Smeg KAP900HX , Smeg KAP900X , Smeg KAP900XT , Smeg KD100B , Smeg KD100N , Smeg KD100N-2 , Smeg KD100RW , Smeg KD100X , Smeg KD100X-1 , Smeg KD100X-2 , Smeg KD120X , Smeg KD120X-1 , Smeg KD120X-2 , Smeg KD120XU , Smeg KD150X-1 , Smeg KD150X-2 , Smeg KD70X , Smeg KD70X-1 , Smeg KD90B , Smeg KD90N , Smeg KD90N-2 , Smeg KD90NU , Smeg KD90RW , Smeg KD90RW-2 , Smeg KD90RWU , Smeg KD90X , Smeg KD90X-1 , Smeg KD90X-2 , Smeg KD90XU , Smeg KMD1030XL , Smeg KMD730XL , Smeg KMD930XL , Smeg KRA1200X , Smeg KRA900X , Smeg KRA960X , Smeg KS1250X1 , Smeg KS1260XL1 , Smeg KS12X-AUS , Smeg KS9500X1 , Smeg KS9600XL1 , Smeg KS9P , Smeg KS9X-AUS , Smeg KS9XSEK , Smeg KSA6EX8 , Smeg KSA9EX8 , Smeg KSA9EXPK , Smeg KSC9222X , Smeg KSE110BL , Smeg KSE110WH , Smeg KSE110X , Smeg KSE12000X , Smeg KSE1250X , Smeg KSE1260XL , Smeg KSE605X , Smeg KSE6500X , Smeg KSE6600XL , Smeg KSE7700A , Smeg KSE7700X , Smeg KSE86AO , Smeg KSE86AO9 , Smeg KSE86PO , Smeg KSE86PO9 , Smeg KSE89A2 , Smeg KSE89AO , Smeg KSE89AO9 , Smeg KSE89D2 , Smeg KSE89D9 , Smeg KSE89P , Smeg KSE89P9 , Smeg KSE89PO , Smeg KSE89PO9 , Smeg KSE89RA , Smeg KSE89RA2 , Smeg KSE9000X , Smeg KSE905X , Smeg KSE9100X , Smeg KSE9500X , Smeg KSE9510X , Smeg KSE9600XL , Smeg KSE9700A , Smeg KSE9700X , Smeg KSE9800XL , Smeg KSED102X , Smeg KSED62X , Smeg KSED65N , Smeg KSED65X-1 , Smeg KSED72X , Smeg KSED75X , Smeg KSED75X-1 , Smeg KSED92EB , Smeg KSED92NE , Smeg KSED92X , Smeg KSED95N , Smeg KSED95P , Smeg KSED95P9 , Smeg KSED95X-1 , Smeg KSED95XT , Smeg KSEM90X-1 , Smeg KSEM90X8 , Smeg KSEM90XT , Smeg KSEP600X , Smeg KSEP900X , Smeg KSEP920X , Smeg KV90 , Smeg KV90-1 , Smeg KV90XL , Smeg KVB91 , Smeg LD102D

Pages: 8 (0.49 Mb)

Download Smeg CA12SHRPX Instructions manual

Smeg CA12SHRPX Instructions manual - Page 1
1
Smeg CA12SHRPX Instructions manual - Page 2
2
Smeg CA12SHRPX Instructions manual - Page 3
3
Smeg CA12SHRPX Instructions manual - Page 4
4
Smeg CA12SHRPX Instructions manual - Page 5
5
Smeg CA12SHRPX Instructions manual - Page 6
6
Smeg CA12SHRPX Instructions manual - Page 7
7
Smeg CA12SHRPX Instructions manual - Page 8
8
WARNING!
Read the instructions carefully before installing and/or using the hood.
Before connecting, make sure that the mains voltage corresponds to the voltage on
the rating plate inside the hood. (see fig. 7)
Once you remove the appliance from its packaging make sure it is intact. If the
product is damaged, do not use it and contact the Smeg assistance network.
It is recommended that a qualified technician performs installation and adjustment
operations .
The minimum distance between the cooker and the lower part of the hood must be
750mm for gas cookers and 650 mm for electric cookers.
Before carrying out any kind of maintenance or cleaning, disconnect the hood from
the mains supply.
Inspect and clean the filters thoroughly and in accordance with the intervals
suggested by the manufacturer.
Do not cook or fry in a way that could result in flames being sucked into the hood and
causing a fire.
The hood surface can be cleaned with a damp cloth and a non-bleach liquid
detergent.
Make sure the room is properly ventilated when using the hood and other gas
appliances at the same time.
Comply with the regulations on air discharge when operating the hood.
The extracted air must not be routed into a duct used to discharge fumes of gas-
operated appliances.
This appliance must not be used by children without an adult supervision
and disabled people may require assistance.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE IF THE ABOVE
INSTRUCTIONS ARE NOT FOLLOWED.
OPERATION
This appliance has been designed to work as a
DUCTING
hood (evacuation of the
air) or RECYCLING hood (recycling of the filtered air).
DUCTED MODE: In order to use the hood in the ducted mode, connect the motor
intake, by means of a suitable ducting hose not less than 120mm diameter, directly to
the external fumes outlet.
Note: Remove any carbon filters.
RECIRCULATION MODE: If it is not possible to discharge fumes outside, the hood
can be used to filter and recycle the air. This way, air and fumes are filtered by the
anti-odour carbon filters and recirculated through the aerating grids on the sides of
chimney.
EN 01
INSTALLATION INSTRUCTIONS:
The hood is supplied with all the necessary
accessories for installation. The minimum distance
between the cooker and the lower part of the hood
must be 750 mm for gas cookers and 650 mm for
electric cookers (Fig. 1). The hood is supplied with a
motor intake (Fig 2). If it has not been assembled by
the manufacturer, you can assemble it using the
supplied screws (for type 1) or pushing (for type 2)
If the motor intake is equipped with a non-return
valve, make sure it opens and closes perfectly.
The following instructions will assist installation:
a) The hood should be centred with respect to the
cooker.
b)
The hood is supplied with two supports/hooks (a)
(Fig 3) or bracket (b) that need to be fixed to the
wall by means of wall anchors . The L1 holes for
these supports are on the back of the hood (fig.
4)
c)
Remove the anti-grease filters, put the hood on
the wall and mark the position of the holes for the
supports/hooks.
d) Drill the two previously marked holes after
removing the hood from the wall.
e) Fix the two supports/hooks to the wall.
f) Mark the L2 holes on the wall to fix the hood
safely. (fig. 4) Drill and put the anchors in the
holes.
g) Hang the hood on to the supports/hooks (fig. 5)
and level by means of the adjusting screw
(fig.3).
h) Fix the hood safe by tightening both wall anchors.
Ducted mode or Recirculation mode installation:
Ducted mode:
In the ducted mode, connect the motor outlet to the
fumes outlet duct not less than 120mm diameter.
Warning: if the hood is equipped with an active
carbon filter, it must be removed (see page 7)
EN 02
Fig.2
Hood levelling screw
Fig.3
Type 1
Type 2
Fig.1
(a)
(b)