Smeg T18G8X2UG Instruction Manual
Download Instruction manual of Smeg PDX30B Hob for Free or View it Online on All-Guides.com. This version of Smeg PDX30B Manual compatible with such list of devices, as: PDX30B-1, PDX30F, PDX30R, PDX30T-1, T18G8X2UG
Brand: Smeg
Category: Hob
Type: Instruction manual
Model: Smeg PDX30B , Smeg PDX30B-1 , Smeg PDX30C , Smeg PDX30C-1 , Smeg PDX30F , Smeg PDX30P , Smeg PDX30P-1 , Smeg PDX30R , Smeg PDX30R-1 , Smeg PDX30S , Smeg PDX30S-1 , Smeg PDX30T-1 , Smeg PDX30U , Smeg T18G8X2UG
Pages: 23 (2.42 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
45
Instructions for the Installer
9. GAS CONNECTION
Before installing it, check that the local gas supply conditions (gas type
and pressure) are compatible with the appliance's settings.
The connection to the gas mains may be made using a copper pipe or a
continuous-wall steel hose in accordance with the standard regulations
in force.
When installation is complete, check for any leaks with a soapy solution,
never with a naked light. The appliance is tested with G20 (2H) natural
gas at the pressure of 20 mbar.
For use with other types of gas, see point "10. ADAPTING TO
DIFFERENT TYPES OF GAS".
The gas intake connection has an external ½” gas thread (ISO 228-1).
Connection with copper pipe: The
connection to the gas supply mains
must be made so that no stresses or
strains of any kind are applied to the
appliance. The connection can be
made using the adapter unit D with
two conical elemetns, always fitting
the gasket C supplied.
Connection with steel hose: Use
only continuous-wall stainless steel
hoses compliant with the relevant
regulations, and always fit the gasket
C supplied between the fitting A and
the hose B.
When connecting with a hose, ensure that the total length of the pipeline is
not more than 1.5 metres; also ensure that the hoses do not touch moving
parts and are not crushed.
9.1 Bottled gas connection
Use a pressure regulator and make the connection to the gas cylinder in
accordance with the relevant regulations. Make sure that the gas supply
pressure is as stated in the table in point "10.2 Burner and Nozzle Data
Tables".