SMEG DRY73CS-1 Instructions For Use Manual
Download User manual manual of Smeg DRY73CS-1 Dryer for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
236170
Certain programs do not allow selection of this function.
After drying is completed, this function returns to the
initial higher temperature.
Anti-crease program
The anti-crease program is set at 1 hour by default. You may
also select either to switch off the program (0 h) or prolong the
program to last 2 hours (2 h).
The anti crease program is stopped if you open the door of the
appliance during the program, or if you switch the appliance off.
Heater off
Heater may be switched off if you wish to dry laundry at room
temperature; drying time is extended (see cf. Selection of
additional functions).
Child protection
Operation of the dryer may be protected against accidental
changes of programs or functions. The function is activated by
pressing the START button.
By pressing any key the sound alarm signals that child lock is on.
Relevant symbol ashes, and the display reads CHILD LOCK
ON.
If you want to set new drying program, or change additional
settings, you must rst remove the protection.
Switching the function off:
- during drying:
If you want to interrupt the program or change settings, switch off
the function temporarily by keeping the B button (MENU) pressed
for 4 seconds. During this time the program can be stopped
by pressing D button (see cf. Interruptions). Relevant symbol
ashes on the display. The function is reactivated by pressing the
D button (START).
In case you fail to change anything within 15 seconds, the
protection is automatically reactivated. Even if you stop drying
by opening the door and child lock is temporarily switched off, it
is automatically restarted if the door is closed within the next 15
seconds.
If you switch off the protection in the menu during the
interruption, it will no longer be active when the program
continues.
- after drying is completed:
By pressing the B button (MENU) for four seconds after the
drying program is completed, the protection is switched off
permanently. This means that it will remain inactive also the next
time you start the drying procedure. Otherwise the protection
remains active till the next drying process. It is switched off by a
11