• Home
• Brands
• Smeg Manuals
• Smeg APL2640TC
• Smeg APL2640TC Instructions For Installation And Use Manual

Smeg APL2640TC Instructions For Installation And Use Manual

Download Instructions for installation and use manual of Smeg APL2640TC Hob for Free or View it Online on All-Guides.com. This version of Smeg APL2640TC Manual compatible with such list of devices, as: SE2641TC, SE2733TC, SE2773TC, SE660, SE2958TC

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Instructions for the installer

30

For operation on 380-415 V 3N

∼

: use an - H05V2V2-F type five-core

cable (5 x 1,5 mm

2

).

For operation on 380-415 V 2N

∼

: use an - H05V2V2-F type four-core

cable (4 x 2,5 mm

2

).

For operation on 220-240 V 3

∼

: use an - H05V2V2-F type four-core

cable (4 x 2,5 mm

2

).

For operation on 220-240 V

∼

: use an - H05V2V2-F type three-core

cable. (3 x 4 mm

2

: hob with 5 cooking zones)

The cable end to be connected to the appliance must be provided with

an earth wire (yellow-green) at least 20 mm longer.

READ THE CONNECTION LAYOUT PLATE UNDERNEATH THE APPLIANCE WITH CARE.

If the appliance you have purchased is not fitted with a mains power lead a power lead

resistant to a temperature of at least 90°C must be used.

Otherwise, the electrical safety of the appliance may be put at risk.

The manufacturer declines all responsibility for damage to persons or things caused by non-

observance of the above prescriptions or by interference with any part of the appliance.

Warning: pass the power cable through hole “A” and fit

the cable clamp plate after making the electrical

connection.

To fit the plate, simply use the provided bolts to secure it

under the casing as shown in the figure.

TYPE 1 TERMINAL BOARD

Warning: close the cable clamp after making the

electrical connection. Close the terminal board cover by

twisting it down.

TYPE 2 TERMINAL BOARD