Smeg AP64S3 Instructions For Use Manual

Download User manual manual of OPTICOM VDC10X - DATA 2 Cooktop, Hob for Free or View it Online on All-Guides.com. This version of OPTICOM VDC10X - DATA 2 Manual compatible with such list of devices, as: SE63SNX3, SE63STF3, SE64NX3, SR804COGH, SR804SEA4

OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 1
1
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 2
2
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 3
3
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 4
4
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 5
5
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 6
6
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 7
7
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 8
8
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 9
9
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 10
10
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 11
11
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 12
12
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 13
13
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 14
14
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 15
15
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 16
16
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 17
17
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 18
18
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 19
19
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 20
20
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 21
21
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 22
22
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 23
23
Instructions for the user
45
9 USING THE HOB
Before turning on the burners, make sure that the burner rings, caps
and grids have been fitted correctly.
In the ultrarapid burner, notch A must be aligned with pin B.
Grid C provided is intended for use with woks (Chinese pans).
Adapter D comes only with open grids models and is intended for use
with small sized vessels.
9.1 Ignition of the burners
The device is fit with electronic ignition. Simply press and
simultaneously turn the knob counter-clockwise on the low point flame
symbol, until the burner is ignited. In models with safety valve, the knob
has to be turned to the ignition symbol before it is pressed, and after
ignition the knob has to be kept pressed for about 2 seconds to keep
the flame lit and to activate the safety device.
The burner might go off when the knob is released. In this case repeat
the aforesaid operation keeping the knob pressed for more than 2
seconds.
Should the burners go off accidentally in the models with valves, a
safety device will trip after approximately 20 seconds to block the gas
outlet even if the cock is open.
9.2 Practical advice for using the burners
For better burner performance and minimum gas
consumption, flat bottomed, even pans must be used,
with covers and proportional in size to the burners (see
paragraph “9.3 Diameter of the pans”).
To avoid overcooking or damage to the surface top