Apple Xserve Replacement Instructions Manual

Download Replacement instructions manual of Apple Xserve Computer Hardware, Desktop for Free or View it Online on All-Guides.com.

Brand: Apple

Category: Computer Hardware , Desktop , Server

Type: Replacement instructions manual for Apple Xserve

Pages: 6 (0.43 Mb)

Download Apple Xserve Replacement instructions manual

Apple Xserve Replacement instructions manual - Page 1
1
Apple Xserve Replacement instructions manual - Page 2
2
Apple Xserve Replacement instructions manual - Page 3
3
Apple Xserve Replacement instructions manual - Page 4
4
Apple Xserve Replacement instructions manual - Page 5
5
Apple Xserve Replacement instructions manual - Page 6
6
 Xserve (Late 2006)
073-1086 Rev. A
FB-DIMM Memory
Replacement Instructions
Follow the instructions in this document carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Online instructions are available at http://www.apple.com/support/diy/.
Memory Overview
The Xserve (Late 2006) has 8 memory slots. The systems come with at least 1 gigabyte (GB) of
memory on two fully-buered dual inline memory modules (FB-DIMMs). To improve performance
and capacity, you can install additional DIMMs for a total of up to 32 GB of memory. The eight
memory slots are labeled DIMM 1 through DIMM 8.
1 2 3 4
5 6 7 8
You can use the following memory in the Xserve (Late 2006):
667 MHz DDR2 ECC FB-DIMMs
512 MB, 1 GB, 2 GB, or 4 GB in matching pairs (optimal, 4 or 8 identical DIMMs)
36 devices per DIMM, maximum
Error-correcting code (ECC)
Important: Apple recommends that you use Apple-approved FB-DIMMS. Other FB-DIMMs might
degrade the performance of the Xserve. DIMMs from older Xserve systems are not compatible
with this Xserve.
Note: Before you purchase DIMMs other than those recommended by Apple, make sure that
the memory manufacturer conforms to the Joint Electronic Device Engineering Council (JEDEC)