GE GTDP301GL1WS Installation Instructions Manual
Download Installation instructions manual of GE DNCD450GGAWC Dryer for Free or View it Online on All-Guides.com. This version of GE DNCD450GGAWC Manual compatible with such list of devices, as: GTDP400GM0WS, GTDX200GM2WW, GTDX300GM2WS, PTDN600GM0WT, PTDS650GM0WT
Brand: GE
Category: Dryer
Type: Installation instructions manual
Model: GE DNCD450GGAWC , GE GTD , GE GTDN500GM2WS , GE GTDP200GM2WW , GE GTDP250GM2WW , GE GTDP300GM2WS , GE GTDP301GL1WS , GE GTDP301GL2WS , GE GTDP350GM2WS , GE GTDP400GM0WS , GE GTDP400GM2WS , GE GTDX100GM2WW , GE GTDX200GM2WW , GE GTDX205GM2CC , GE GTDX300GM2WS , GE PTDN600GM0WT , GE PTDN600GM2WT , GE PTDS650GM0WT , GE PTDS650GM2WT
Pages: 9 (1.9 Mb)
1
2
3
4
5
6
7
8
9
Installation
Instructions
Gas Drger
Questions on installation? Call: 1-800-GECARES (US)
or Visit ou r Web site at: www.GEAppliances.com (US)
BEFOREYOU BEGIN
Read these instructions completely and
carefully.
•IMPORTANT- Save these instructions for
local inspector's use.
•IMPORTANT- Observe all governing codes
and ordinances.
• Note to Installer - Besureto leavethese
instructionswith the customer.
• Note to Customer - Keep these instructions
with gour Use and Care Book for future
reference.
• Before the old drger is removed from service or
discarded, remove the drger door.
• Inspect the drger exhaust outlet and straighten
the outlet walls if theg are bent.
• Service information and the wiring diagram
are located in the control console.
• Do not allow children on or in the appliance.
Close supervisionof children is necessarg when
the applianceis used near children.
• Install the drgerwhere the temperature is
above SO°Ffor satisfactorg operation of the
drger controlsgstem.
WARNING RBKOFFIRE
To reducethe riskof severeinjurg or death,follow all installation instructions.
Clothesdrger installationmust be performed bg a qualified installer.
Installthe clothesdrger according to these instructions and in accordancewith local
codes. Inthe absenceof local codes,installation must comptgwith NationalFuelGas
Code,ANSIZ225.1/NFPA54or the CanadianNatural Gasand PropaneInstallationCode,
CSAB149.1.
ColifomioSafeDrinkingWaterond ToxicEnforcementAct.
Thisact requiresthe governor of Californiato publisha list of substancesknownto the
state to causecancer,birth defects or other reproductiveharm and requiresbusinesses
to warn customersof potential exposureto suchsubstances.Gasappliancescan
cause minorexposureto four of these substances,namelg benzene,carbon monoxide,
formaldehgdeand soot, causedprimaritg bg the incompletecombustion of natural gas
or LPfuels.Properlgadjusted drgers wilt minimizeincomplete combustion.Exposure
to these substancescan be minimizedfurther bg properlgventingthe drger to the
outdoors.
Thisdrger must beexhaustedto the outdoors.
Useonlg 4" rigid metal ducting for exhausting the clothesdrger to the outdoors.
DONOTinstall a clothesdrger with flexibleplastic ducting materials. Ifflexible metal
(semi-rigidor foit-tgpe)duct is installed,it must be ULlisted and installed inaccordance
with the instructions found in "ConnectingTheDrgerTo HouseVent"on page 6 of this
manual.Flexibleventing materialsare knownto collapse,be easilgcrushed,and trap
lint.Theseconditionswilt obstruct drger airflow and increasethe risk of fire.
Donot install or storethis appliance in ang location whereit could be exposedto water
and or weather.
Drgersinstalled in residentialgaragesmust be elevated 18" (46cm)above the floor.
Savetheseinstructions.(Installers:Besure to leavethese instructionswith the
customer).
in the state of Massachusetts,installation must be performed by a qualifiedor
licensedcontractor, plumber, or gasfitter qualified or licensedby the state.
TOOLSYOU
WILLNEED
(x2)
IO"ADJUSTABLEWRENCHES _.
8"PIPEWRENCH LEVEL
SLIPJOINTPLIERS FLATBLADESCREWDRIVER
M ATERIALSYOUWILL NEED
4"DIA.METALDUCT I====_
(RECOMMENDED)
4"DIAMMETALELBOW
4"DIA.FLEXIBLEMETAL(SEMI-RIGID)
ULLISTEDTRANSITIONDUCT
(IFNEEDED)
KITWXO8X10077(INCLUDES2ELBOWS) 4"DUCTCLAMPS
4"SPRINGCLAMPS
4"DIA.FLEXIBLEMETAL(FOILTYPE) _(x2)
ULLISTEDTRANSITIONDUCT
(IFNEEDED.)
PIPE
EXHAUSTHOOD COMPOUND
DUCTTAPE
FLEXIBLEGASLINECONNECTOR
SOAPSOLUTION
FORLEAKDETECTION
SAFETYGLASSES
GLOVES
Step 1
Step 2
Step 3
Verifg Your Gas Installation (see section 2).
Prepare the Area and Exhaust for Installation of
New Drger (see section 1).
Check and Insure the Existing External Exhaust
is Clean (see section 1)and Meets Attached
Installation Specifications (see section 6).
Step 4 Remove the Foam Shipping Pads (see section 1).
Step 5 Move the Drger to the Desired Location.
Step 6 Level Your Drger (see section 8).
Step 7 Connect the Gas Supplg (see section 3) and check
for leaks (see section 4).
Step 8 Connect the External Exhaust (see section 7).
Step 9 Connect the Power Supplg (see section 5).
Step 10 Check the Operation of the Power Supplg, Gas
Connections, and Venting.
Step 11 Place the Owners Manual and the Installation
Instructions in a Location Where Theg Will Be
Noticed Bg the Owner.
For Alcove or Closet Installation see section 9.
For Bathroom or Bedroom Installation see section 10.
For Mobile or Manufactured Home see section 11.
234Dll13PO02 31-16225-1 07/08/10 GE