GE 27909 Instruction Book

Download Operation & user’s manual of GE 27909 Cordless Telephone, Handsets for Free or View it Online on All-Guides.com.

Brand: GE

Category: Cordless Telephone , Handsets , Telephone System

Type: Operation & user’s manual

Model: GE 27909 , GE 27909EE1

Pages: 1 (1.09 Mb)

Download GE 27909 Operation & user’s manual

GE 27909 Operation & user’s manual - Page 1
1
Service
If trouble is experienced with this equipment, for repair or warranty information,
please contact customer service at 1-800-448-0329. If the equipment is causing harm
to the telephone network, the telephone company may request that you disconnect
the equipment until the problem is resolved.
This product may be serviced only by the manufacturer or its authorized service
agents. Changes or modifications not expressly approved by Thomson Inc. could void
the user’s authority to operate this product. For instructions on how to obtain ser vice,
refer to the warranty included in this guide or call customer service at
1-800-448-
0329.
Or refer inquiries to:
Thomson Inc.
Manager, Consumer Relations
P O Box 1976
Indianapolis, IN 46206
Attach your sales receipt to the booklet for future reference or jot down the date this
product was purchased or received as a gift. This information will be valuable if service
should be required during the warranty period.
Purchase date ______________________________________________________
Name of store ______________________________________________________
Limited Warranty
What your warranty covers:
• Defects in materials or workmanship.
For how long after your purchase:
• One year, from date of purchase.
(The warranty period for rental units begins with the first rental or 45 days from
date of shipment to the rental firm, whichever comes first.)
What we will do:
• Provide you with a new or, at our option, a refurbished unit. The exchange unit is
under warranty for the remainder of the original product’s warranty period.
How you get service:
• Properly pack your unit. Include any cables, etc., which were originally provided
with the product. We recommend using the original carton and packing materials.
• ”Proof of purchase in the form of a bill of sale or receipted invoice which is
evidence that the product is within the warranty period, must be presented to
obtain warranty service.” For rental firms, proof of first rental is also required. Also
print your name and address and a description of the defect. Send via standard
UPS or its equivalent to:
Thomson Inc.
11721 B Alameda Ave.
Socorro, Texas 79927
• Pay any charges billed to you by the Exchange Cen ter for service not covered by
the warranty.
• Insure your shipment for loss or damage. Thomson Inc. accepts no liability in case
of damage or loss.
• A new or refurbished unit will be shipped to you freight prepaid.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual provides information regarding
operating instructions and user controls. Any additional information, should be
obtained from your dealer.)
• Installation and setup service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning damage.
Product Registration:
• Please complete and mail the Product Registration Card packed with your unit .
It will make it easier to contact you should it ever be necessary. The return of the
card is not required for warranty coverage.
Limitation of Warranty:
• The warranty stated above is the only warranty applicable to this product.
All other warranties, express or implied (including all implied warranties of
merchantability or fitness for a particular purpose) are hereby disclaimed. No
verbal or written information given by Thomson Inc., its agents, or employees
shall create a guaranty or in any way increase the scope of this warranty.
• Repair or replacement as provided under this warran ty is the exclusive
remedy of the consumer. Thomson Inc. shall not be liable for incidental or
consequential damages result ing from the use of this product or arising
out of any breach of any exp ress or implied warranty on this product . This
disclaimer of warranties a nd limited warranty are governed by the laws of t he
state of Indiana. Excep t to the extent prohibited by applicable l aw, any implied
warranty of merchantability o r fitness for a particular purpose on this p roduct
is limited to the ap plicable warranty period set forth above.
How state law relates to this warranty:
• Some states do not allow the exclusion nor limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts so
the above limitations or exclusions may not apply to you.
• This warranty gives you specific legal rights, and you also may have other rights
that vary from state to state.
If you purchased your product outside the USA:
• This warranty does not apply. Contact your dealer for warranty information.
Accessory InformAtIon
DESCRIPTION MODEL NO.
Handset Replacement Battery 5-2734
AC Power adaptor 5-2757
Handset 27911
8. Wait for the person at the receiving handset to press the talk/call back button.
NOTE: If the receiving handset does not answer within two
minutes, the intercom call is automatically canceled and the
originating handset displays NO ANSWER.
9. When finished, press the talk/call back on either handset to deactivate the
intercom.
Three-way Conferencing
You may have a 3-way conversation using the handset, the base and an open
line.
1. When the phone rings, press the talk/call back button on the handset and
press the Speaker button on the base.
2. Conference shows on the handset display. And when the conference starts, all
the 3 parties will hear conference alert tone.
3. When finished, press the talk/call back button (or put the handset back into the
base cradle) and press the Speaker button again to hang up.
NOTE: If the phone system is expanded to more than one
handset, only 2 handsets and the base will be allowed in a
telephone line conference. When the third handset trys to join
the conference, Unavailable will be shown with error beeps.
When a handset is in use (in talk mode), the other handset(s) will
show Line in use.
cAller ID (cID)
IMPORTANT: In order to use this unit’s Caller ID features, you
must subscribe to either the standard Name/Number Caller ID
Service or Call Waiting Caller ID Service. To know who is calling
while you are on the phone, you must subscribe to Call Waiting
Caller ID Service.
This unit receives and displays information transmitted by your local phone
company. This information can include the phone number, date, and time; or the
name, phone number, date, and time. The incoming date/time information will
override the telephone Date/Time setting.
Call Waiting Caller ID
Provided you subscribe to Call Waiting Caller ID service from your phone
company; if you receive an incoming call and you are using the GE multi handset
system, a beep indicates the presence of a Call Waiting call on the line. The Call
Waiting Caller ID information will be displayed and stored in the history of all
handsets in the system.
When you hear the call waiting beep in the handset receiver, press the flash/
exit button to put the current call on hold and answer the incoming call.
Press
flash/exit
again to return to the original call.
Receiving CID Records
When you receive a call, the Caller ID information is transmitted between the first
and second ring. The Caller ID information appears on the display while the phone
rings, giving you a chance to monitor the information and decide whether or not
to answer the call.
Storing CID Records (In CID Memory)
If you are not at home or cannot answer, your telephone’s Caller ID memory
stores the data for the 30 most recent calls (up to 20 digits and 15 characters for
each record) you received so you can see who called while you were unavailable.
And the display shows New calls, as a reminder that there are unanswered calls.
When the 31st call is received, the oldest Caller ID record (1st call) is automatically
deleted.
You may review the stored information at any time. Calls received since your last
review show as NEW in the display. Calls that have not been previously reviewed
but were received from the same number more than once show as RPT in the
display.
Reviewing CID Records
As calls are received and stored, the display is updated to let you know how many
calls have been received. To scroll CID records:
1. Make sure the phone is OFF (not in talk mode).
2. Press the cid/vol (4) button to review the oldest call and scroll toward the
most recent calls.
3. Press the cid/vol (3) button to review the newest call and scroll toward the
older calls.
NOTE: When you reach the end of records, --End of list-- shows
in the display.
NOTE: If no calls have been received, Empty shows in the display
for 2 seconds at the time the cid/vol (3or4) button is pressed.
Dialing a CID Number
1. Make sure the phone is OFF (not in TALK mode).
2. Use the cid/vol (3or4) button to display the desired record.
3. Press the talk/call back button. The number dials automatically.
Formatting a CID Number Before Dialing
NOTE: Depending on (a) how the incoming caller’s phone
number is formatted when it is received, and (b) whether or
not you previously pre-programmed your local area code into
the set up menu, you may need to adjust the format of the
incoming caller’s stored phone number before making the call,
press the format button to adjust the number, and try again.
1. Make sure the phone is OFF (not in talk mode).
2. Use the cid/vol (3or4) button to scroll to the desired CID record.
3. Press the format button to scroll to the desired format.
4. Press the talk/call back button. The formatted number dials automatically.
Available formats include:
Number of digits Explanation Example
Eleven digits long distance code “1 ” 1-317-888-8888
+3-digit area code
+7-digit telephone number.
Ten digits 3-digit area code + 317-888-8888
7-digit telephone number.
Seven digits 7-digit telephone number. 888-8888
Storing CID Records into Phone Book
You may also store CID information in the Phone Book.
NOTE:
It is important that you format CID records correctly
BEFORE storing in Phone Book as you cannot reformat CID
records stored in Phone Book.
1. Make sure the phone is OFF (not in talk mode).
2. Use the cid/vol (3or4) button to scroll to the desired CID record.
3. Press menu button.
4. Use the cid/vol (3or4) button to scroll to Save number.
5. Press menu button to enter edit mode. You may now change the name, if
desired. Please refer to section “Handset Name” for name editing method.
NOTE: If the CID record does not include a name. Enter name
shows in the display.
6. Press the menu button to save.
NOTE: If Memory full shows in the display and the unit emits 3
beeps, you should delete one or more unnecessary records and
repeat above steps to continue the call record storage.
NOTE: Press the flash/exit button to keep the previous setting
(making no changes) and return to the standby mode.
NOTE: If the selected CID record contains any information that is
non-numeric, the unit will not allow this record to transfer to the
internal user memory.
Deleting a CID Record
1. Make sure the phone is OFF (not in TALK mode).
2. Use the cid/vol (3or4) button to display the CID record you want to delete.
3. Press the menu button.
4. Use the cid/vol (3or4) button to scroll to Delete?.
5. Press the menu button. Confirm? shows in the display.
6. Press the menu button again to confirm the deletion. Deleted shows in the
display.
NOTE: Press the flash/exit button to return to the standby mode
without deleting any CID records.
Deleting All CID Records
1. Make sure the phone is OFF (not in TALK mode).
2. Use the cid/vol (3or4) button to display any CID record.
3. Press the menu button.
4. Use the cid/vol (3or4) button to scroll to Delete all?.
5. Press the menu button. Confirm? shows in the display.
6. Press the menu button again to confirm the deletion. All deleted shows in the
display.
NOTE: Press the flash/exit button to return to the standby mode
without deleting any CID records.
IntroDuctIon
CAUTION: When using telephone equipment, there are basic
safety instructions that should always be followed. Refer to
the IMPORTANT SAFETY INSTRUCTIONS provided with this
product and save them for future reference.
IMPORTANT: Because cordless phones operate on electricity,
you should have at least one phone in your home that isn’t
cordless, in case the power in your home goes out.
Before you BegIn
Parts Checklist
Make sure your package includes the items shown here.
equIpment ApprovAl InformAtIon
Your telephone equipment is approved for connection to the Public Switched
Telephone Network and is in compliance with parts 15 and 68, FCC Rules and
Regulations and the Technical Requirements for Telephone Terminal Equipment
published by ACTA.
1 Notification t o the Local Telephone Company
On the bottom of this equipment is a label indicating, among other information, the
US number and Ringer Equivalence Number (REN) for the equipment. You must,
upon request, provide this information to your telephone company.
The REN is useful in determining the number of devices you may connect to your
telephone line and still have all of these devices ring when your telephone number
is called. In most (but not all) areas, the sum of the RENs of all devices connected
to one line should not exceed 5. To be certain of the number of devices you may
connect to your line as determined by the REN, you should contact your local
telephone company.
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular
jack that is also compliant. See installation instructions for details.
Notes
• This equipment may not be used on coin service provided by the telephone
company.
• Party lines are subject to state tariffs, and therefore, you may not be able to use
your own telephone equipment if you are on a party line. Check with your local
telephone company.
• Notice must be given to the telephone company upon permanent disconnection
of your telephone from your line.
• If your home has specially wired alarm equipment connected to the telephone
line, ensure the installation of this product does not disable your alarm equipment.
If you have questions about what will disable alarm equipment, consult your
telephone company or a qualified installer.
US Number is located on the cabinet bottom.
REN Number is located on the cabinet bottom.
2 Rights of the Telephone Company
Should your equipment cause trouble on y our line which may harm the telephone
network, the telephone company shall, where practicable, notify you that
temporary discontinuance of service may be required. Where prior notice is not
practicable and the circumstances warrant such action, the telephone company
may temporarily discontinue service immediately. In case of such temporary
discontinuance, the telephone company must: (1) promptly notify you of such
temporary discontinuance; (2) afford you the opportunity to correct the situation;
and (3) inform you of your right to bring a complaint to the Commission pursuant to
procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities,
equipment, operations or procedures where such action is required in the
operation of its business and not inconsistent with FCC Rules and Regulations. If
these changes are expected to affect the use or performance of your telephone
equipment, the telephone company must give you adequate notice, in writing, to
allow you to maintain uninterrupted service.
Interference InformAtIon
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference; and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
Privacy of Communications may not be ensured when using this product.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or
television that is “receiving” the interference).
• Reorient or relocate and increase the separation between the telecommunications
equipment and receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit different
from that to which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult your dealer or an
experienced radio/television technician for additional suggestions. Also, the Federal
Communications Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-
000-00345-4 when ordering copies.
Notice: The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment .
HeArIng AID compAtIBIlIty (HAc)
This telephone system meets FCC standards for Hearing Aid Compatibility.
lIcensIng
Licensed under US Patent 6,427,009.
fcc rf rADIAtIon exposure stAtement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimeters between the radiator and your body. This
transmitter must not be co-located or operated in conjunction with any other antenna
or transmitter.”
InformAtIon for Dect proDuct
This 27909 telephone is compliant with the DECT 6.0 standard which
operates in the 1.92GHz to 1.93GHz frequency range.
Thomson Inc.
10330 North Meridian Street
Indianapolis, IN 46290-1024
© 2007 Thomson Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
Model 27909
00018927 (Rev. 0 Dom E)
07-10
Printed in China
Modular
telephone
line jack
Wall plate
Auto Talk
This option allows you to pick up the handset from base to answer an incoming
call without pressing the talk/call back button.
From the Setup HS Menu:
1. Press the cid/vol (3or4) button to scroll to the Auto Talk sub-menu.
2. Press menu button to enter the menu. Use the cid/vol (3or4) button to scroll
to your selection. The default setting is On.
3. Press the menu button to save your selection.
Handset Name
From the Setup HS Menu:
1. Press the cid/vol (3or4) button to scroll to the Handset name sub-menu.
2. Press menu button to enter the menu. The default setting is Handset.
3. Use the touch-tone pad to enter a name (up to 13 characters). More than one
letter is stored in each of the number keys. For example, to enter Bill Smith,
press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I.
Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second
letter L, and press the 1 key to insert a space between the first and last name.
Press the 7 key 4 times for the letter S; press the 6 key once for the letter M;
press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the
4 key twice for the letter H.
NOTE: If you make a mistake, press cid/vol (- or +) button to
move the cursor forward or backward, then use the mute/clear
button to backspace and delete one character at a time.
NOTE: * key is a function key to toggle between the upper case
and low case of characters during text edit.
4. Press the menu button to save your name. You will hear a confirmation tone
and the display shows Saved.
Base Station Setup
1. Make sure your phone is OFF (not in talk mode).
2. Press the menu button to go to the main menu.
3. Press cid/vol (3or4) button to scroll to Setup BS.
4. Press menu button to confirm and you may program the following items: Area
Code, Dial mode and BS Backlight.
Area Code
The telephone uses the pre-programmed area code to determine the number
format to display when a valid Caller ID record is received. The pre-programmed
area code is also used for the Dialback feature.
From the Setup BS Menu:
1. Press the cid/vol (3or4) button to scroll to the Area code sub-menu.
2. Press menu button to enter the menu. Enter area code shows in the display.
3. Use the touch-tone pad to enter your 3-digit area code.
4. Press menu button to save the setting.
Dial Mode
From the Setup BS Menu:
1. Press the cid/vol (3or4) button to scroll to the Dial mode sub-menu.
2. Press menu button to enter the menu and use the cid/vol (3or4) button to
select Tone or Pulse.
3. Press menu button to save your selection.
BS Backlight
From the Setup BS Menu:
1. Press the cid/vol (3or4) button to scroll to the BS Backlight submenu.
2. Press menu button to enter the menu and use the cid/vol (3or4) button to
select On or Off.
3. Press menu button to save your selection.
Date/Time
NOTE: Time set on handset will be transferred to the base unit
automatically.
1. Make sure your phone is OFF (not in talk mode).
2. Press the menu button to go to the main menu and use cid/vol (3or4) button
to scroll to Date/Time.
3. Press menu button to enter the menu. Year 2006 shows in the display.
4. Use the touch-tone pad to enter the last two digits of the current year (range:
00 to 99).
5. Press menu button to save the year setting and proceed to date setting.
6. Date 01/01 shows in the display. Use the touch-tone pad to enter two digits for
current month and day respectively.
7. Press menu button to save the month/date setting and proceed to time
setting.
8. Time 12:01p shows in the display. Use the touch-tone pad to enter four digits
for current time and use cid/vol (3or4) button to toggle between “p” (pm) and
“a” (am).
9. Press menu button to save the setting. Saved shows in the display.
NOTE: If you subscribe to Caller ID service, the current date/
time is set automatically when you receive your first CID record
and will override manually set date/time.
Registration
NOTE: The following procedures can ONLY be done with 27909
or 27911 Accessory Handsets.
A cordless handset will not operate until it is registered to the base. During the
registration process, keep the handset near the base. Up to 4 cordless handsets
can be registered to one base.
NOTE: If a handset is not registered; Not Register flashes on the
display and if the TALK button on the handset is pressed, it will
display Unavailable.
1. Make sure your phone is OFF (not in talk mode).
2. Press the menu button to go to the main menu and use cid/vol (3or4) button
to scroll to Registration.
3. Press menu button to confirm and you may program the following items:
Register and Remove handset.
Register
From the Registration Menu:
1. Press the cid/vol (3or4) button to scroll to the Register sub-menu.
2. Press menu button to enter the menu.
3. Press and hold the page button on base for 5 seconds.
4. The charge/in use indicator will flash slowly for 2 minutes which shows the
base is in registration mode.
5. If the registration is successful, the handset shows Successful and emits a
confirmation tone for 3 seconds.
6. If the registration is failed (i.e. timeout), the handset shows “No base” and emits
an error tone.
De-register
Deregistration cancels registration. During the deregistration process, keep the
handset near the base.
WARNING: It is not recommended that a handset be
deregistered unless absolutely necessary because once a
handset is deregistered, that handset’s telephone features
cannot be used until the handset is re-registered.
From the Registration Menu:
1. Press the cid/vol (3or4) button to scroll to the Remove handset sub-menu.
2. Press menu button to enter the menu. Remove handset? shows on the display.
3. Press menu button again to confirm de-registration.
Answer Machine
1. Make sure your phone is OFF (not in talk mode).
2. Press the menu button to go to the main menu.
3. Press cid/vol (3or4) button to scroll to Answer machine.
4. Press menu button to confirm and you may program the following items:
Answer on/off, Ring to answer, Voice language, and Security code.
Answer on/off
This menu allows you to set the answering system on or off.
From the Answer machine Menu:
1. Press the cid/vol (3or4) button to scroll to the Answer on/off submenu.
2. Press menu button to enter the menu and use the cid/vol (3or4) button to
select On or Off.
3. Press menu button to save your selection.
Ring to answer
This feature lets you select the number of times you want the phone to ring before
the answering system answers a call.
From the Answer machine Menu:
1. Press the cid/vol (3or4) button to scroll to the Ring to answer submenu.
2. Press menu button to enter the menu and use the cid/vol (3or4) button to
scroll to your selection. The default setting is 5 Rings.
3. Press menu button to save your selection.
NOTE: If you select TOLL SAVER, the unit answers after the
3rd ring if there are NEW messages in the answering system,
OR the unit answers after the 6th ring if there are NO new
messages. Then, when you access the answering system from
another remote location, you may hang up after 4 rings to save
long distance charges.
Voice language
From the Answer machine Menu:
1. Press the cid/vol (3or4) button to scroll to the Voice language submenu.
2. Press menu button to enter the menu and use the cid/vol (3or4) button to
select the desired language.
3. Press menu button to save your selection.
Security code
You can access the answering system from a tone dialing telephone in another
(remote) location. The security code is required for remote access, and it prevents
unauthorized access to your answering system.
From the Answer machine Menu:
1. Press the cid/vol (3or4) button to scroll to the Security code submenu.
2. Press menu button to show the current security code on the display.
3. Use the number keys to enter your new 3-digit security code. The default
setting is 1 2 3.
4. Press menu button to save the setting.
Model 27909 DECT6.0
Cordless Handset with
Answering System &
Speakerphone
User’s Guide
SEE MA RKI NG ON BOT TOM / BAC K O F P ROD UCT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSE THIS
PRODUCT TO RAIN
OR MOISTURE.
THE LIGHTNING
FLASH AND ARROW
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHI N THE
TRIANGLE IS A
WARNING SIGN
ALERTING YO U OF
IMPORTANT
INSTRUCTION S
ACCOMPANYING
THE PRODUCT.
CAUTION:
Base Station
1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C),
and place your cordless telephone on a level surface, such as a desktop or
tabletop, or you may mount it on the wall.
2. Plug one end of the telephone line cord into the TEL LINE jack on the bottom of
the base and the other end into a modular jack.
3. Plug the AC power adaptor into the electrical outlet and the DC connector into
the jack on the bottom of the base.
4. You can stretch out the kick-stand on the bottom of the base for a better
viewing angle when placed on desk-top.
5. Place the handset in the base cradle. The charge/in use indicator turns on,
verifying the battery is charging.
6. Allow the phone to charge for 14 hours prior to first use. If you don’t properly
charge the phone, battery performance is compromised.
CAUTION: To reduce risk of personal injury, fire, or damage
use only the 5-2757 power adaptor listed in the user’s guide.
This power adaptor is intended to be correctly orientated in
a vertical or floor mount position.
Wall Mounting
1. Plug the AC power adaptor into the electrical outlet and the DC connector into
the jack on the back of the base.
2. Plug one end of the straight telephone line cord into the jack on the bottom of
the base.
3. Close the kick-stands on the bottom of the base unit if you’ve opened them
before.
4. Feed the line cord through the groove and plug the end into the modular
telephone jack.
5. Slip the mounting holes (on the bottom of the base) over the wall plate posts
and firmly slide the unit down into place.
AnswerIng system setup
This section shows you how to set up your answering system to receive incoming
calls. Before you begin the set up process, you must turn on the answering
system.
Press the ans on/off button to turn the answering system on and off. The
Message Indicator lights when the answering system is on. The indicator blinks
when you have new messages.
NOTE: The answering system displays “- -” when it is off.
Voice Instructions
If you need additional assistance; while in standby mode, press the review button
on the base and follow the voice instructions.
Speaker Volume
Use the volume (5 or 6) buttons to adjust speaker volume on the base to a
comfortable level. L1 is the minimum speaker volume and L8 is the maximum.
Recording the Outgoing Announcement
For best results when recording, you should be about nine inches from the
microphone, and eliminate as much background noise as possible.
1. Make sure the answering system is ON.
2. Press and hold the announce button on the base until the speaker announces
“RECORD ANNOUNCEMENT AFTER TONE".
3. Begin speaking after you hear the beep.
4. Release the announce button when you finish your announcement.
NOTE: If you choose not to record an outgoing announcement,
a default announcement plays instead. To return to the default
announcement after you have recorded your own outgoing
announcement, press the announce button and release it
when you hear the beep. Or, press the delete button while the
announcement is reviewing.
NOTE: The maximum duration allowed for outgoing message is
2 minutes.
progrAmmIng tHe telepHone
Standby Screen
The handset displays the handset name, date, time, signal and battery status. The
base displays the current date and time.
NOTE: If the clock is not set, the date and time display will blink.
The blinking will stop when user updates the date/time from the
Handset menu, or the base receives a call with CID having date
and time stamp.
Programming Functions
The system uses a menu structure to give you access to all of the built-in features.
You may program the following items in main menu: Intercom, Setup HS, Setup
BS, Date/Time, Registration and Answer machine.
NOTE: If the handset is not registered, or is out of range, Setup
BS and Date/Time are not programmable, and Unavailable
displays as you try to enter these two menus.
NOTE: During programming, you may press the mute/clear
button at any time to exit the sub-menu and return to the main
menu, or press flash/exit to exit programming and return to
standby screen.
NOTE: If no key is pressed for 60 seconds, the handset will
automatically exit programming and return to standby screen.
Handset Setup
1. Make sure your phone is OFF (not in talk mode).
2. Press the menu button to go to the main menu.
3. Press cid/vol (3or4) button to scroll to Setup HS.
4. Press menu button to confirm and you may program the following items: Ring
Volume, Tones, Auto Talk, Handset Name and Language.
Language
From the Setup HS Menu:
1. Press the cid/vol (3or4) button to scroll to the Language sub-menu.
2. Press menu button to enter the menu.
3. Use the cid/vol (3or4) button to select English, Français or Espanol. The
default setting is English.
4. Press the menu button to save your selection.
Ring Volume
There are 4 volume levels for your selection. They are Volume 1 to 3 and Ringer off
respectively.
From the Setup HS Menu:
1. Press the cid/vol (3or4) button to scroll to the Ring Volume sub-menu.
2. Press menu button to enter the menu. Use the cid/vol (3or4) button to scroll
to your selection. The default setting is VOL 3.
3. Press the menu button to save your selection and the new volume setting
shows in the display.
NOTE:
Ringer can be disabled by pressing the mute/clear/ringer
on/off button in standby mode, please refer to “Ringer On/Off”.
Tones
From the Setup HS Menu:
1. Press the cid/vol (- or +) button to scroll to the Tones sub-menu.
2. Press menu button to confirm and you may program the following items: Low
Battery, No Coverage and Key Tone.
3. Use the cid/vol (3or4) button to scroll to the item you want to program and
press menu button to enter.
Low Battery - You may set the warning beep to “On” when your handset
battery is low, so as to alert you to charge the battery. Press the cid/vol
(3or4) button to scroll to On or Off, then press menu button to save the
setting. The default setting is On.
No Coverage - You may set the warning beep to “On” or “Off” when the
handset is out of range. Press the cid/vol (3or4) button to scroll to On or Off,
then press menu button to save the setting. The default setting is On.
NOTE: When the handset is in the idle (off) mode and is out
of range from the base unit the display shows Searching. If
the talk/call back button is pressed, the display briefly shows
Unavailable then returns to Searching.
Key Tone - You may set the key tone to “On” or “Off” when you press buttons.
Press the cid/vol (3or4) button to scroll to On or Off, then press menu button
to save the setting. The default setting is On.
Telephone Operation
Charge/In Use Indicator on Base
The charge/in use indicator on the base will flash to alert you to an incoming call,
during paging, or registration. The indicator will remain lit when a handset is in the
base charging or when the line is in use.
Making a Call
1. Press the talk/call back button. Dial the desired number.
- OR -
Dial the number first, then press the talk/call back button.
2. When finished, press the talk/call back button or put the handset back into the
base cradle to hang up.
NOTE: If you want to delete the pre-dial number you entered,
press the mute/clear button until all of the digits are erased.
Answering Calls
1. When the phone rings, press the talk/call back button.
- OR -
Press the speaker button on the base.
2. When finished, press the talk/call back button on handset or the speaker
button on base, or put the handset back into the base cradle to hang up.
NOTE: If you have turned the Auto Talk function on, you can
pick up the handset from the base to answer the incoming call
directly, without pressing any buttons.
NOTE: Adjust the handset volume by pressing the
cid/vol (3or4)
button during a call.
NOTE: If you press the speaker button to answer a call while the
handset is not in the base cradle, the call will not be ended even
when you place the handset back into the base cradle during
the conversation.
Inserting a Pause in the Dialing Sequence
Press the #pause button twice to insert a delay in dialing sequence when a pause
is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or
to wait for a computer access tone.) Pause shows in the display as a P, and each
pause counts as one digit in the dialing sequence.
Redial
To quickly redial a number you dialed:
1. Make sure the phone is OFF (not in talk mode).
2. Press the talk/call back button.
3. Press the redial button first, then use the cid/vol (3or4) button to select the
desired redial number.
NOTE: You may choose from 10 last dialed numbers.
4. Press the menu button. The number dials automatically.
-OR-
1. Make sure the phone is OFF (not in talk mode).
2. Press the redial button. Then use the cid/vol (3or4) button to select the
desired redial number.
NOTE: You may choose from 10 last dialed numbers.
3. Press the talk/call back button. The number dials automatically.
Editing a Redial Record Before Dialing
1. Make sure the phone is OFF (not in talk mode).
2. Press the redial button first, then use the cid/vol (3or4) button to select the
desired redial number.
3. Press the menu button.
4. Press cid/vol (- or +) button to scroll to Select.
5. Press the menu button to enter edit mode.
6. Press cid/vol (3or4) button to move the cursor forward or backward. Use the
touch-tone pad to add digits or press the mute/clear button to backspace and
delete one digit at a time.
7. After editing, press talk/call back to dial the modified redial number.
Storing a Redial Record in Phone Book
1. Make sure the phone is OFF (not in talk mode).
2. Press the redial button first, then use the cid/vol (3or4) button to scroll to the
desired redial number.
3. Press the menu button.
4. Press cid/vol (3or4) button to scroll to Save number.
5. Press the menu button to enter edit mode.
6. Enter name shows in the display. Input a name. Please refer to section
“Handset Name” for name editing method.
NOTE: A name must be input otherwise the record cannot be
stored.
7. Press the menu button to save. Saved shows in the display. Repeat steps 2
through 7 to save other records.
Deleting a Redial Record
1. Make sure the phone is OFF (not in talk mode).
2. Press the redial button first, then use the cid/vol (3or4) button to select the
desired redial number.
3. Press the menu button.
4. Use the cid/vol (3or4) button to scroll to Delete?.
5. Press the menu button to delete the record showing in the display. Confirm?
shows in the display.
6. Press the menu button again to confirm the deletion. Deleted shows in the
display.
NOTE: Press the flash/exit button to return to the standby mode
without deleting any redial records.
Deleting All Redial Records
1. Make sure the phone is OFF (not in talk mode).
2. Use the cid/vol (3or4) button to display any redial record.
3. Press the menu button.
4. Use the cid/vol (3or4) button to scroll to Delete all?.
5. Press the menu button. Confirm? shows in the display.
6. Press the menu button again to confirm the deletion. All deleted shows in the
display.
NOTE: Press the flash/exit button to return to the standby mode
without deleting any redial records.
Call Timer
After you press the talk/call back button on the handset, the built-in call timer shows on
the display and counts the length of time of the call in minutes and seconds.
Auto Standby
If you place the handset in the cradle while the handset is off the hook (during a
call), the call is automatically disconnected.
Ringer On/Off
1. Make sure the phone is OFF (not in talk mode).
2. Press the mute/clear/ringer on/off button to switch the ringer on or off.
NOTE: If you turn the ringer OFF, RINGER OFF shows in the
display.
Flash
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call
Waiting calls. During a phone call, you will hear a beep to indicate another call
is waiting on the line and Caller ID information for the waiting call shows on the
handset display.
To connect to the waiting call, press the flash/exit button on the handset, and
your original call is put on hold.
To switch between the two calls, press the flash/exit button.
TIP: Do not press the talk/call back button on the handset to
activate a custom calling service, such as call waiting, or call
will disconnect.
Mute
To have a private, off-line conversation, use the MUTE feature. The party on the
telephone line cannot hear you, but you can hear them.
1. Press the mute/clear button. The handset display shows MUTE.
2. Press the mute/clear button to cancel and return to your phone conversation.
Page
The page feature helps you locate a misplaced handset.
1. Press the page button on the base. The charge/in use indicator on the base
flashes; the handset beeps and Page from base shows in the handset display.
2. To cancel the page, press the page button on the base, or press any key on the
handset. Otherwise the paging will last for 2 minutes.
Receiver Volume Control
When the handset is ON (in talk mode) you may adjust the receiver volume by
pressing the cid/vol (3or4) button. There are five volume levels to choose from.
VOL 1 is minimum and VOL 5 is maximum.
Intercom Operation
The intercom feature allows you to have a conversation with another registered
handset without tying up the telephone line, allowing you to still receive incoming
calls.
NOTE: The function is applicable only with additional handsets.
NOTE: The following procedures can ONLY be done with Model
279XX handset.
Handset to Handset Intercom Call
1. Make sure the originating phone is OFF (not in talk mode).
2. Press the menu button and use the cid/vol (3or4) button to scroll to
Intercom.
3. Press the menu button to enter the menu. INT - Number? shows on the
display.
4. Use the touch-tone pad to input the number of the handset you want to page.
(For example: press 1 to page handset 1.)
5. The receiving handset is paged and emits a tone.
NOTE: To cancel the page, press the talk/call back button on the
originating handset.
pHone Book
Each handset can store up to fifty 24-digit numbers with up to 15-character
names in memory for quick dialing. The records are stored by alphabetic
ascending order.
Adding Phone Book Entries
1. Make sure the phone is OFF (not in talk mode).
2. Press the ph. book button.
3. Press the menu button and use the cid/vol (3or4) button to scroll Add new.
4. Press the menu button. Enter number shows in the display.
5. Use the touch-tone pad to input a telephone number.
TIP: Press the #pause button twice to insert a pause in a
number if necessary.
6. Press the menu button. Enter name shows in the display. Please refer to
section “Handset Name” for name editing method.
7. Press the menu button to save.
NOTE: If Memory full shows in the display, you should delete
one or more unnecessary records and repeat above steps to
continue the call record storage.
Reviewing Phone Book Records
1. Make sure the phone is OFF (not in talk mode).
2. Press the ph. book button.
3. Press the cid/vol (3or4) button to scroll through the records,
-OR
Press the number keys to go to the name of the records started with the
corresponding character.
TIP: Press the *tone button to show the person’s telephone
number whose name is current shown in the display.
Editing a Phone Book Record
1. When reviewing the phone book records, use the cid/vol (3or4) button or the
number keys to scroll to the desired record.
2. Press menu button and use the cid/vol (3or4) button to scroll to Edit.
3. Press menu button to enter edit mode. You may now change the number, if
desired.
4. Press menu button to proceed to name change. You may now change the
name, if desired. Please refer to section “Handset Name” for name editing
method.
5. Press menu button to save.
NOTE: Press the flash/exit button to keep the previous setting
(making no changes) and return to the standby mode.
Deleting a Phone Book Record
1. When reviewing the phone book records list, use the cid/vol (3or4) button or
the number keys to scroll to the desired record.
2. Press menu button and use the cid/vol (3or4) button to scroll to Delete?.
3. Press menu button. Confirm? shows in the display.
4. Press menu button to confirm. Deleted shows in the display.
NOTE: If you don’t want to delete the record when the display
shows DELETE?, simply press the flash/exit button, or wait for
one minute to exit to the standby mode automatically.
Dialing a Phone Book Record
Dial a phone book record while in talk mode:
1. Make sure the phone is ON (in talk mode) by pressing the talk/call back button.
2. Press the ph. book button to access the phone book.
3. Use the cid/vol (3or4) button or the number keys to scroll to the desired
record.
4. Press the menu button to dial the number.
- OR -
Dial a phone book record while reviewing it:
1. Make sure the phone is OFF (not in talk mode).
2. Press the ph. book button to access the phone book.
3. Use the cid/vol (3or4) button or the number keys to scroll to the desired
record.
4. Press the talk/call back button. The number dials automatically.
If you want to edit the number before dialing:
1. Press the menu button when reviewing phone book records.
2. Use the cid/vol (3or4) button to scroll to Select and press the menu button
enter edit mode.
3. When finished editing, press talk/call back to dial the number.
Chain Dialing from Phone Book
Use this feature to make calls which require a sequence of numbers, such as a
calling card number used for a frequently called long distance number.
You can store each part of the dialing sequence (such as Long Distance Access
Number, Authorization Code, and a frequently called long distance number) in the
phone book and simply repeat step 2 through 4 in “Dial a phone book record while
in talk mode” to dial them one by one.
AnswerIng system operAtIon
This section discusses the buttons and features on the answering system.
Message Indicator
The message counter gives you a numeric display of how many messages you
have and some other information of the answering system.
a) A number displayed without flashing -- No new messages. The number is the
total number of old messages.
b) A flashing number displayed -- There are new messages. The number is the
total number of old and new messages.
c) Two bars - - display steadily -- Answerer is off.
d) F flashing on the display -- Memory is full.
e) CL flashing on the display -- Clock is not set since power up or after power
failure.
f ) Six horizontal bars flashing on the display – MEMO is recording.
g) AN flashing on the display – The system is answering an incoming call and
recording an incoming call.
h) LA displays steadily -- The answering system is being accessed remotely.
i) SP displays steadily -- Base speaker is turned on.
NOTE: While the messages are playing, the message counter
will display the messages in the order they were received.
NOTE: The maximum recording time for each message is 3
minutes.
Messages Playback
The message counter lets you know when you have message(s) or new
message(s). To play the messages, press the play/stop button.
While a message is playing, you may do the following:
• Press the play/stop button to stop the message playback.
• Press and release the review button to restart the current message.
• Press and release the review button twice to go to the previous message.
• Press and release the skip button to go to the next message.
• Press the delete button to erase the current message.
Erasing Messages
You may erase messages in the following two ways:
To erase a message while it is playing
1. Press and release the play/stop button.
2. Press the review and skip buttons to select and play the message you want to
erase.
3. Press the delete button, the current message is erased, and the next message
plays.
To erase all previously played messages in a mailbox
1. Make sure the phone is OFF (not in talk mode)
2. Press and hold the delete button until “ALL OLD MESSAGES ERASED“ is
announced.
Answering System Remote Access
You can access your answering system from any touch-tone phone by entering
your 3-digit security code during the playing of outgoing announcement or after
you hear the outgoing announcement.
1. Dial the telephone number to which the answering system is connected.
2. Enter the security code during the outgoing announcement or after you
hear the tone.
3. Follow the voice menu to use the answering system ’s remote functions.
The remote feature lets you perform the following functions:
To Press this button
Review message 1
Play back messages 2
Stop message playback 2
Erase message 0 (during message playback)
Skip message 3
Turn off/on answerer 4
Review voice menu options 7
Memory Full
When answering system memory is full, the system answers after 10 rings,
announces “Memory full” and waits for you to enter 3-digit security code. If you
don’t enter the security code within 7 seconds , the phone hangs up.
You should erase some messages so the answering system can record new
messages.
NOTE: The unit also answers after the 10th ring if it is turned
off. To access the answering system, enter your 3-digit security
code.
Leaving a Memo
This feature lets you record a memo up to 3 minutes long to store as an incoming
message.
1. Press and hold the memo button
2. Begin speaking after it announces “Record message”.
3. Release the memo button when finished.
cHAngIng tHe BAttery
CAUTION: To reduce the risk of fire or personal injury, use
only the Thomson Inc. approved Nickel-metal Hydride (Ni-
MH) battery model 5-2734, that is compatible with this unit.
1. Make sure the telephone is OFF (not in TALK mode) before you replace battery.
2. Remove the battery compartment door.
3. Disconnect the cord attached to the battery pack and remove the battery pack
from the handset.
4. Insert the new battery pack and connect the cord to the jack inside the battery
compartment.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge. Allow the
handset battery to properly charge (for 14 hours) prior to first use or when
you install a new battery pack. If you do not properly charge the phone,
battery performance will be compromised.
Battery Safety Precautions
Do not burn, disassemble, mutilate, or puncture. Like other batteries of this
type, toxic materials could be released which can cause injury.
To reduce t he risk of fire o r personal inju ry, use only th e
Nickel-metal
Hydride
battery listed in the U ser’s Guide.
Keep batteries out of the reach of children.
Remove batteries if storing over 30 days.
Display Messages
The following messages shows the status of the phone, provides Caller ID
information, or helps you set up and use your phone.
BLOCKED Indicates the person is calling from a number which is
blocked from transmission.
DELETE ALL? Prompt asking if you want to erase all records.
DELETE? Prompt asking if you want to erase the current record.
END OF LIST Indicates that it is the end of the list.
ENTER NAME Prompt telling you to enter a name.
ENTER NUMBER Prompt telling you to enter a telephone number.
NEW CALLS Indicates call or calls which have not been reviewed.
HANDSET NAME Prompt telling you to enter a user name for the
handset.
UNAVAILABLE The handset is not yet registered or is out of range.
No line Indicates that the telephone line is not connected.
Line in use Indicates that the telephone line is in use.
Empty Indicates there are no CID records in memory.
Searching Indicates handset is too far away from the base, and the
handset is searching for the base.
Page from base Someone pressed the PAGE button on the base.
RPT Indicates a repeat call message. Indicates a new call from
the same number was received more than once.
Unknwon Indicates incoming call is from an area not serviced by
CID or the CID information was not sent.
Handset Sound Signals
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps (several times) Page signal
One beep every 14 seconds Low battery warning
Troubleshooting Guide
Telephone Solutions
No dial tone
• Check or repeat installation steps:
Make sure the base power cord is connected to a working electrical outlet.
Make sure the telephone line cord is connected to the base and the wall jack.
• Connect another phone to the same jack. If it doesn’t work, the problem
might be your wiring or local service.
• The handset may be out of range of the base. Move closer to the base.
• Make sure the battery is properly charged (for 14 hours).
Dial tone is ok, but can’t dial out
• Make sure the type of phone service you are subscribed to is TONE or PULSE,
and that the unit is SET TO MATCH the dialing mode.
Handset does not ring
• Make sure the handset ringer is set to on.
• The handset may be out of range of the base. Move closer to the base.
• You may have too many extension phones on your line. Try unplugging some
extensions.
• Check for a dial tone. If no dial tone is heard, see “No dial tone”.
You experience static, noise, or fading in and out
• The handset may be out of range of the base. Move closer to base.
• Make sure base is not plugged into an electrical outlet with another
household appliance. If necessary, relocate the base.
• Charge the battery (for 14 hours).
Memory dialing doesn’t work
• Did you follow proper dialing sequence?
Unit locks up and no communication between the base and cordless handset
• Unplug the power adaptor from the electrical outlet and the bottom of the
base. Remove the handset battery. Wait for 30 seconds and plug the power
adaptor back into the base and electrical outlet. Reconnect the battery and
charge for 14 hours.
Searching.... shows in the handset display
• Move the handset closer to the base.
• Make sure the base power cord is connected to a working electrical outlet .
Date/Time setting is restored to default setting
• May be caused by power failure. Set Date/Time again.
Caller ID Solutions
No Display
• Charge the battery (for 14 hours). Or replace the battery.
• Make sure the unit is connected to a non-switched electrical outlet.
Disconnect the power adaptor from the base and reconnect it.
No Caller ID
• You must be subscribed to the standard Name/Number Caller ID service
from your local telephone company to receive CID information.
Battery
If you experience any of the following problems, even after recharging the battery,
you may need to replace the battery pack:
• Short talk time
• Poor sound quality
• Limited range
General Product Care
To keep your unit working and looking good, follow these guidelines:
• Avoid dropping the handset, as well as other rough treatment to the phone.
• Clean the phone with a soft cloth.
• Never use strong cleaning agents, paint thinner, abrasive powder, alcohol, or
other chemical products to clean the unit. Doing so will damage the finish.
• Retain the original packaging in case you need to ship the phone at a later
date.
• Periodically clean the charge contacts on the handset and base with a clean
pencil eraser.
Causes of Poor Reception
• Aluminum siding.
• Foil backing on insulation.
• Heating ducts and other metal construction that can shield radio signals.
• You ’re too close to appliances such as microwaves, stoves, computers, etc.
• Atmospheric conditions, such as strong storms.
• Base is installed in the basement or lower floor of the house.
• Base is plugged into AC outlet with other electronic devices.
• Baby monitor is using the same frequency.
• Handset battery is low.
• You’re out of range of the base.
Telephone Jack Requirements
To use this phone, you need an RJ11C type modular
telephone jack, which might look like the one pictured here,
installed in your home. If you don’t have a modular jack,
call your local phone company to find out how to get one
installed.
InstAllAtIon
Digital Security System
Your cordless p hone uses a digital security system to protect against false
ringing, unauthorized access, and charges to your phone line.
INSTALLATION NOTE: Some cordless telephones operate at
frequencies that may cause or receive interference with nearby
TVs, microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be
placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther
away from these appliances.
Certain other communications devices may also use the 1.9
GHz frequency for communication, and, if not properly set,
these devices may interfere with each other and/or your new
telephone. If you are concerned with interference, please refer
to the owner’s manual for these devices on how to properly
set channels to avoid interference. Typical devices that may
use the 1.9 GHz frequency for communication include wireless
audio/video senders, wireless computer networks, multi-
handset cordless telephone systems, and some long-range
cordless telephone systems.
Important Installation Guidelines
• Avoid sources of noise and heat, such as motors, fluorescent lighting,
microwave ovens, heating appliances and direct sunlight.
• Avoid areas of excessive dust , moisture and low temperature.
• Avoid other cordless telephones or personal computers.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
HAnDset lAyout
Base
Handset
Telephone line cord
AC power adaptor
Handset battery pack
Handset
back cover
BAse lAyout
talk/call back
(button)
cid/vol 4 (caller ID/
volume 4button)
#pause (button)
flash/exit (button)
mute/clear/
ringer on/off
(button)
phonebook (button)
cid/vol 3 (caller ID/
volume 3button)
menu (button)
redial (button)
format (button)
* tone (button)
InstAllIng tHe pHone
Installing the Handset Battery
NOTE: You must connect the handset battery before use.
CAUTION: To reduce the risk of fire or personal injury, use
only the Thomson Inc. approved Nickel-metal Hydride (Ni-
MH) battery model 5-2734, that is compatible with this unit.
1. Locate battery which is packaged inside a plastic bag and is separate from the
handset.
2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
NOTE: To ensure proper battery installation, the connector is
keyed and can be inserted only one way.
4. Insert the battery pack.
5. Close the battery compartment by placing the handset back cover slightly
higher than the handset and then sliding the cover down into position.
To place order, have your Visa, MasterCard, or Discover Card ready and call
toll-free 1-800-338-0376.
A shipping and handling fee will be charged upon ordering. It is required by law
to collect appropriate sales tax for each individual state, country,and locality to
which the merchandise is being sent.Items are subject to availability.
display
microphone
ans on/off
(answerer on/off
button)
display
play/stop (button)
page (button)
review/skip (button)
delete (button)
message counter
indicator
volume 5/6 (button)
memo (button)
announce (button)
charge/in use
(indicator)
speaker (button)
speaker
CID display 1 on base
CID display 2 on base
Caller ID name
Caller ID phone number
CID display on handset
black wire
red wire
battery
pack
PRESS DOWN
FIRMLY
NOTE: The RBRC seal on the battery used in your Thomson Inc. product
indicates that we are participating in a program to collect and recycle the
rechargeable battery (or batteries).
For more information go to the RBRC web site at www.rbrc.org
or call 1-800-8-BATTERY or contact a local recycling center.
microphone