Sharp RK-12S30 Installation Instructions Manual

Download Installation instructions manual of Sharp RK-12S30 Kitchen Appliance Accessories for Free or View it Online on All-Guides.com.

Brand: Sharp

Category: Kitchen Appliance Accessories

Type: Installation instructions manual for Sharp RK-12S30

Pages: 8 (0.88 Mb)

Download Sharp RK-12S30 Installation instructions manual

Sharp RK-12S30 Installation instructions manual - Page 1
1
Sharp RK-12S30 Installation instructions manual - Page 2
2
Sharp RK-12S30 Installation instructions manual - Page 3
3
Sharp RK-12S30 Installation instructions manual - Page 4
4
Sharp RK-12S30 Installation instructions manual - Page 5
5
Sharp RK-12S30 Installation instructions manual - Page 6
6
Sharp RK-12S30 Installation instructions manual - Page 7
7
Sharp RK-12S30 Installation instructions manual - Page 8
8
SHARP
iNSTALLATiON iNSTRUCTiONS
BUILT-IN KiT MODEL
RK-12S30
iMPORTANT:
PROVIDED
EXHAUST DUCT
BACK
DIVIDE PLATE L
EXHAUST DUCT BOTTOM
This Built-In Kit is designed for use with Sharp SuperSteam Ovens specifying a RK-12S30
Built-In Kit on the rating label on the front of the oven.
The cabinet or wall opening must be within the following dimensions:
HEIGHT 19" to 19 1/8" (482 mm - 486 mm)
WIDTH 28" to 28 1/4" (710 mm - 719 mm)
DEPTH 23 1/4" minimum (509.5 mm minimum)
The completed built-in kit frame assembly dimensions:
HEIGHT 19 1/2" (495mm)
WIDTH 30" (762mm)
NOTE:The bottom ofthe cut-out opening for built-in usemust be36inches(915mm) or higherfrom the floor.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION!
The electrical requirements for this oven are 120 volts, 15 amps. The oven has a 5-15 plug
and requires a 5-15 receptacle.
PARTS
PART NAME Q'TY
DUCT UPPER
RECTIFIER
PLATE L
DIVIDE PLATE R EXHAUST
DUCT LEFT
FRAME
REAR SPACER ASSEMBLY
SCREW@ - SHORT
J
EXHAUST
DUCT
RIGHT
SCREW(B) - MIDDLE SCREW (C) - LONG
* For walls other than wood, you may need screws appropriate for that
wall to install the frame.
* Be sure to DISCONNECT THE PLUG of the oven from the electrical
outlet before installing the oven and kit.
* Because the kits are metal, due caution should be used in handling
and installation to avoid the possibility of injury.
EXHAUST DUCT BACK
1
PDVC-B 107WRWZ
EXHAUST DUCT UPPER
1
PDVC-B 105WRWZ
DIVIDE PLATE L
1
PSKR-A486WRWZ
DIVIDE PLATE R
1
PSKR-A487WRWZ
RECTIFIER PLATE L
1
PSKR-A484WRWZ
EXHAUST DUCT LEFT
1
PDVC-B 108WRWZ
EXHAUST DUCT RIGHT
1
PDUC-B117WRWZ
EXHAUST DUCT BOTTOM
1
PDVC-B 106WRWZ
FRAME ASSEMBLY
1
FDEC-A004WRKZ
SCREW(A) 23
XHTS740P08000
SCREW(B) 2
XMMS841P13000
SCREW(C) 4
XMSS827P25000
REAR SPACER
1
PSPAFA003WRWZ
CUSHION _ 5/8" x 16",
15 mm x 405 mm 2
PCUS-A245WRPZ
CUSHION _2)1/4" X 24 3/8",
5 mm x 618 mm 1
PCUS-A247WRPZ
CUSHION C3)1 1/8" x 27 1/8",
30 mm x 689 mm 1
PCUS-A249WRPZ
CUSHION _4_1/4" X 12",
5 mm x 305 mm 1
PCUS-A251WRPZ
CUSHION @ 1/4" X 15",
5 mm x 382 mm 1
PCUS-A253WRPZ
TI NSEB 184WR RZ-D92
Printed in Thailand