Fujitsu FTP-627 Manual
Download Operation & user’s manual of Fujitsu FTP-627 Printer, Printer Accessories for Free or View it Online on All-Guides.com.
Brand: Fujitsu
Category: Printer , Printer Accessories
Type: Operation & user’s manual
Model: Fujitsu FTP-627 , Fujitsu FTP-637DCL , Fujitsu FTP-DSL25X SERIES
Pages: 8 (0.04 Mb)
1
2
3
4
5
6
7
8
1
No. Signal I/O Contents No. Signal I/O Contents
1 PRSTB I Data strobe 2 PRSTB-RET —
Connected to logic GND
3 PRDT0 I Data 0 4 PRDT0-RET —
Connected to logic GND
5 PRDT1 I Data 1 6 PRDT1-RET —
Connected to logic GND
7 PRDT2 I Data 2 8 PRDT2-RET —
Connected to logic GND
9 PRDT3 I Data 3 10 PRDT3-RET —
Connected to logic GND
11 PRDT4 I Data 4 12 PRDT4-RET —
Connected to logic GND
13 PRDT5 I Data 5 14 PRDT5-RET —
Connected to logic GND
15 PRDT6 I Data 6 16 PRDT6-RET —
Connected to logic GND
17 PRDT7 I Data 7 18 PRDT7-RET —
Connected to logic GND
19 ACKNLG O Data input acknowledge 20 ACKNLG-RET —
Connected to logic GND
21 BUSY O Busy 22 BUSY-RET —
Connected to logic GND
23 RINF2 O Printer status 2 24 INPRM-RET —
Connected to logic GND
25 SLCTIN I Printer select 26 INPRM I Reset
27 RINF1 O Printer status 1 28 RINF3 O Printer status 3
29 ATF I Paper feed request 30 GND — Logic GND
INTERFACE BOARDS FOR
FTP-627/637DCL/ DSL25X SERIES
Notes: • Symbol “——” means a negative logic signal.
• “–RET” signal is a return signal of the twisted pair cable.
• “I” or “O” means a signal direction from the interface board side.
(3) Connector pin number
(4) Data input signal timing
BM30B-SRDS-G-TF (JST)
(2) Connector pin assignment
PRDT0~7
PRSTB
BUSY
ACKNLG
t1 t3
t2
t4
t5
Data set time
PRSTB pulse width
Data hold time
PRSTB to BUSY= “H”
ACKNLG pulse time
:t1≥0.5 µsec
:t2≥0.5 µsec
:t3≥0.5 µsec
:t4≤0.5 µsec
:t5≈ 5.0 µsec
■ INTERFACE
1. Centronics interface
(1) Connector (CN1)
Connector part number : BM30B-SRDS-G-TFC (JST) or equivalent
Mating connector part number : SHDR-30V-S-B (JST) or equivalent