Fujitsu Lifebook C1320D Software Manual

Download Software manual of Fujitsu C-6581 Laptop for Free or View it Online on All-Guides.com. This version of Fujitsu C-6581 Manual compatible with such list of devices, as: C1410, Lifebook C2220, Lifebook C2320, Lifebook C2340, Lifebook C6330

Fujitsu C-6581 Software manual - Page 1
1
Fujitsu C-6581 Software manual - Page 2
2
Fujitsu C-6581 Software manual - Page 3
3
Fujitsu C-6581 Software manual - Page 4
4
Fujitsu C-6581 Software manual - Page 5
5
Fujitsu C-6581 Software manual - Page 6
6
Fujitsu C-6581 Software manual - Page 7
7
Fujitsu C-6581 Software manual - Page 8
8
Fujitsu C-6581 Software manual - Page 9
9
Fujitsu C-6581 Software manual - Page 10
10
Fujitsu C-6581 Software manual - Page 11
11
Fujitsu C-6581 Software manual - Page 12
12
Fujitsu C-6581 Software manual - Page 13
13
Fujitsu C-6581 Software manual - Page 14
14
Fujitsu C-6581 Software manual - Page 15
15
Fujitsu C-6581 Software manual - Page 16
16
Fujitsu C-6581 Software manual - Page 17
17
Fujitsu C-6581 Software manual - Page 18
18
Fujitsu C-6581 Software manual - Page 19
19
Fujitsu C-6581 Software manual - Page 20
20
Fujitsu C-6581 Software manual - Page 21
21
Fujitsu C-6581 Software manual - Page 22
22
Fujitsu C-6581 Software manual - Page 23
23
Fujitsu C-6581 Software manual - Page 24
24
Fujitsu C-6581 Software manual - Page 25
25
Fujitsu C-6581 Software manual - Page 26
26
Fujitsu C-6581 Software manual - Page 27
27
Fujitsu C-6581 Software manual - Page 28
28
Fujitsu C-6581 Software manual - Page 29
29
Fujitsu C-6581 Software manual - Page 30
30
Fujitsu C-6581 Software manual - Page 31
31
Fujitsu C-6581 Software manual - Page 32
32
Fujitsu C-6581 Software manual - Page 33
33
Fujitsu C-6581 Software manual - Page 34
34
Fujitsu C-6581 Software manual - Page 35
35
Fujitsu C-6581 Software manual - Page 36
36
Fujitsu C-6581 Software manual - Page 37
37
Fujitsu C-6581 Software manual - Page 38
38
1
C Series BIOS
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the
operating environment for your notebook. Your BIOS
is set at the factory for normal operating conditions,
therefore there is no need to set or change the BIOS’
environment to operate your notebook.
The BIOS Setup Utility configures:
Device control feature parameters, such as changing
I/O addresses and boot devices.
System Data Security feature parameters, such
as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following:
1. Turn on or restart your notebook.
2. Press the [F2] key once the Fujitsu logo appears
on the screen. This will open the main menu
of the BIOS Setup Utility with the current
settings displayed.
3. Press the [RIGHT ARROW] or [LEFT ARROW] key
to scroll through the other setup menus to review or
alter the current settings.
Navigating Through The Setup Utility
The BIOS setup utility consists of seven menus; Main,
Advanced, Security, Power, Boot, Info and Exit. This
document explains each menu in turn including all
submenus and setup items.
The following procedures allow you to navigate the
setup utility menus:
1. To select a menu, use the cursor keys: .
2. To select a field within a menu or a submenu, use the
cursor keys: , .
3. To select the different values for each field, press the
[Spacebar] or [+] to change to the next higher selec-
tion and [F5] or [-] to go to the next lower selection.
4. To activate a submenu press the [Enter] key.
5. To return to a menu from a submenu, press
the [Esc] key.
6. To go to the Exit menu from any other menu,
press the [Esc] key.
7. Pressing the [F9] key resets all items in the BIOS to
the default values.
8. Pressing the [F10] key saves the current configura-
tion and exits the BIOS Setup Utility. You will be
asked to verify this selection before it is executed.
9. Pressing the [F1] key gives you a general help screen.
Entering the Setup Utility After a Configuration
Change or System Failure
If there has been a change in the system configuration
that does not agree with the parameter settings stored
in your BIOS memory, or there is a failure in the system,
the system beeps and/or displays an error message after
the Power On Self Test (POST). If the failure is not
too severe, it will give you the opportunity to modify
the settings of the setup utility, as described in the
following steps:
1. When you turn on or restart the computer there is
a beep and/or the following message appears on
the screen:
Error message - please run SETUP
program Press <F1> key to continue,
<F2> to run SETUP
POINT
Selecting a field causes a help message about that field
to be displayed on the right-hand side of the screen.
POINT
Pressing the Enter key with the highlight on a selection
that is not a submenu or auto selection will cause a list
of all options for that item to be displayed. Pressing the
Enter key again will select the highlighted choice.
C Series BIOS
,