• Home
• Brands
• Tripp Lite Manuals
• Tripp Lite B062-002-PS2
• Tripp Lite B062-002-PS2 Owner's Manual

Tripp Lite B062-002-PS2 Owner's Manual

Download Quick start manual of Tripp Lite B062-002-PS2 Switch for Free or View it Online on All-Guides.com.

1

B062-002-PS2 Console Module

B062-002-USB Console Module

This Quick Start Guide briefl y describes how

to install and operate the B062-002-PS2/

B062-002-USB Console Module with the

Matrix KVM Switch.

1

25

Package Contents

The B062-002-PS2/B062-002-USB

Front View

Hardware Installation

The complete package consists of:

• (1) B062-002-PS2 or B062-002-USB Console Module

• (1) Custom KVM Cable

• (1) AC Power Adapter

• (1) Quick Start Guide

If anything is missing or damaged, please contact your dealer

immediately.

1. Link LED – Indicates good connection

2. Local LED – Indicates local PC is being accessed

3. Remote LED – Indicates remote console is being accessed

4. Local/Remote Pushbutton

Note: Local PC or KVM Switch can also be accessed by

using the following Hotkey Sequence: NumLock + minus (-)

key + minus (-) key. Press and hold the NumLock key, hit

the minus (-) key twice, then release the NumLock key.

Before you begin, make sure that power to all the devices

you will be connecting to have been turned off. Follow the

4 steps listed below to properly install your Console Module:

1. Plug your keyboard, mouse and monitor into the

appropriate console ports of the B062-002-PS2/

B062-002-USB Console Module. Each port is labeled

with the appropriate icon to indicate itself.

2. Plug the RJ45 connector into its appropriate port on the

rear panel of the B062-002-PS2/B062-002-USB Console

Module. At the other end, plug the RJ45 connector into

one of the console ports on the rear panel of the

Matrix KVM switch.

3

The B062-002-PS2/B062-002-USB

Rear View

1. Power Jack

2. Local PC Connector

3. Cat5 Port to connect to KVM

4. Firmware recovery switch

5. Console port connectors

Console

• A VGA, SVGA or Multisync monitor capable of the highest

resolution that you will be using on any computer in

the installation.

• A PS/2 Style Keyboard and Mouse (B062-002-PS2) or a

USB Style Keyboard and Mouse (B062-002-USB)

Cables

• For optimal signal integrity and to simplify layout, a high

quality Console Module to Local PC cable (with custom

HD15 connector) is included with the Console Module.

• Use Tripp Lite N001-, N002- or N105-Series Cat5 cable to

connect to KVM switch.

4

System Requirements

6

Hardware Installation ctd….

3. For the Local PC connection, use the cable provided to

connect to the keyboard, mouse and monitor ports of your

local PC. At the other end, plug the HD15 connector into

the appropriate port of the B062-002-PS2/B062-002-USB.

4. Plug in the power adapter, then turn on the

connected computer.

B062-002-PS2

B062-002-PS2

B062-002-USB

B062-002-USB

B060-032

Regulatory Compliance Identifi cation Numbers

For the purpose of regulatory compliance certifi cations and identifi cation, your

Tripp Lite product has been assigned a unique series number. The series number

can be found on the product nameplate label, along with all required approval

markings and information. When requesting compliance information for this

product, always refer to the series number. The series number should not be

confused with the marking name or model number of the product.

Tripp Lite follows a policy of continuous improvement. Product specifi cations

are subject to change without notice. Made in China.

WARRANTY

REGISTRATION

Register online today for

a chance to win a FREE Tripp Lite

product! www.tripplite.com/warranty

200801150--quick start.indd 1200801150--quick start.indd 1 2/4/2008 2:27:07 PM2/4/2008 2:27:07 PM