Freedom9 freeConnect 2400 Quick Install Manual

Download Quick install manual of Freedom9 freeConnect 2400 Switch for Free or View it Online on All-Guides.com.

Brand: Freedom9

Category: Switch

Type: Quick install manual for Freedom9 freeConnect 2400

Pages: 1 (0.5 Mb)

Download Freedom9 freeConnect 2400 Quick install manual

Freedom9 freeConnect 2400 Quick install manual - Page 1
1
freedom9.com 1-888-998-9189
Quick Install Guide
freeConnect 2400
Quick Install Guide for the freeConnect 2400 24-port 10/100 Unmanaged Switch
PACKAGE CONTENTS:
freeConnect 2400
AC Power Adapter
Four rubber feet
Screws and two mounting brackets
CD-ROM with Web Management Utility
and User’s Guide
The freeConnect 2400 provides an
easy and inexpensive way to create or
extend your network. With its 24
10/100Mbps ports, adding additional
clients is fast and simple. Its chassis is
designed to fit into a standard 19” rack
and only takes up 1U of space, ideal for
medium to large workgroups.
freeConnect 2400 - S002410000
A. HARDWARE INSTALLATION:
B. RACKMOUNTING:
C. SETUP:
When installing the freeConnect 2400,
keep the following points in mind:
1. Install the unit in a cool and dry place.
Refer to the manual for details on
permissible temperature and humidity
ranges.
attach the rubber feet included with the
unit to prevent scratching the surface.
The switch can be mounted in an EIA
standard-size, 19-inch rack, which can be
placed in a wiring closet along with other
equipment. To mount the unit, attach the
mounting brackets to the switch’s front
panel (one on each side), and secure
them with the screws provided (Figure 1).
Once the brackets are attached, use the
2. Install the unit in a location free from
electromagnetic interference, vibrations,
dust, and direct exposure to sunlight.
3. Leave at least 4” (10 cm) of space at
the front and rear of the unit for ventilation.
4. Install the unit on a strong, sturdy
surface that can support its weight, or in
an EIA standard-size rack.
5. When placing the unit on a surface,
Once the unit has been installed in the
desired location, connect the power cord
to the AC power receptacle on the back of
the unit, and plug the unit into a power
outlet. Once the unit is powered on,
connect the network devices to the
Ethernet ports on the front of the unit.
screws provided with the rack to install the
unit into the rack (Figure 2).
Figure 1
Figure 2
Revision 1.0