American Dynamics ADACSNETD Data Sheet

Download Datasheet of American Dynamics ADACSNETD Amplifier for Free or View it Online on All-Guides.com.

American Dynamics ADACSNETD Datasheet - Page 1
1
American Dynamics ADACSNETD Datasheet - Page 2
2
DATA SHEET
SensorNet/Manchester
Distribution Panel
Features That Make a Difference:
Amplifies SensorNet or Manchester protocol signals for multi-point
dome control
Switch easily between SensorNet or Manchester protocols
Accommodates home run dome wiring via 16 output ports
Supports home run, daisy chain, and junction box (J-Box) wiring
topologies to accommodate any size system
Install at head end or remote locations
Rack (2U) mountable
Thin, single PCB design allows the panel to be mounted either at the
front or rear of an electronics rack, facing in or out
Surge suppression available on all data and power connections
ADACSNETDP model includes power supply that can power up to
three panels (US) or five panels (International)
Compatible with American Dynamics
MegaPower matrix switcher/
controller systems and Intellex
®
Digital Video Management Systems
(1) The host input ports will be used in sequence whenever the previous input port is not receiving data.
The SensorNet/Manchester distribution panel amplifies either
a SensorNet or Manchester protocol signal for multi-point
dome control which provides the flexibility to operate efficiently
in either protocol setting. With 16 output driver links (two
connectors per link), the panel can accommodate home run
dome wiring, multiple daisy-chained links to domes, or J-Boxes.
The panel also includes inputs for two hosts allowing you to
maintain a connection between both the primary and backup
CPUs and the devices connected to the panel, thereby
providing a redundant solution.
1
For the ultimate control, you
can monitor signal activities on each channel.
Installing the panel is easy, either at the head end or at remote
locations and it can be used in place of a SensorNet J-Box
when power is available for domes locally. The sleek, 2U design
can easily be mounted at the front or rear of an electronics rack,
facing in or out.
The panel is compatible with all versions of American Dynamics
SpeedDome programmable dome cameras, Manchester
receiver drivers, J-Boxes, and control systems that use
SensorNet or Manchester protocols.