Samsung 1080P - 46" LCD 8MS User Information

Download Operation & user’s manual of Samsung 1080P - 46" LCD 8MS Plasma TV for Free or View it Online on All-Guides.com.

Brand: Samsung

Category: Plasma TV

Type: Operation & user’s manual for Samsung 1080P - 46" LCD 8MS

Pages: 2 (1.78 Mb)

Download Samsung 1080P - 46" LCD 8MS Operation & user’s manual

Samsung 1080P - 46
1
Samsung 1080P - 46
2
Figuresand illustrationsinthis UserManualare providedfor reference ]
onlyand maydifferfromactual productappearance.Productdesignand
specificationsmaybe changedwithout notice.
Important Warranty Information Regarding
Television Format Viewing
'_ Seethe warranty cardfor moreh_forrnationon warranty terms.
Wide screenformatPDPDisplays(with16:9aspectratios,the ratioof the
screenwidth to height)areprimarilydesignedto viewwidescreenformat
fuIFmotionvideo.Theimagesdisplayedonthemshould primarilybe inthe wide
screen16:9ratioformat, orexpandedto fillthe screenifyour modeloffersthis
feature,with theimagesconstantlyin motion.Displayingstationarygraphics
andimageson thescreen,suchas thedark sidebarson non-expanded
standardformattelevisionvideoand programming,shouldbe limitedto no
o
morethan5Yoof thetotaltelevisionviewingperweek.
Additionally,viewingotherstationaryimagesandtext suchas stockmarket
crawls,video gamedisplays,stationIogos,web sitesor computergraphicsand
patterns,shouldbelimitedas describedabovefor alltelevisions.Displaying
stationaryimagesformorethan 5%of totalviewingtime cancause uneven
agingofyour PDPdisplayand leavesubtle,but permanentburnedqnghost
imagesinthe PDPpicture.To avoidthis,varythe programmingand images,
andprimarilydisplayfullscreenmovingimages,notstationarypatternsordark
bars.OnPDPmodelsthat offerpicturesizingfeatures,usethese controlsto
view differentformatsas afullscreenpicture.
Becarefulintheselectionof televisionformatsyouusefor viewingandthe
amountof timeyouviewthem. UnevenPDPagingas a resultof format
selectionand use,as wellasburnedin images,arenot coveredby your
Samsunglimitedwarranty.
SAMSUNGELECTRONICSNORTHAMERICANLIMITEDWARRANTY
STATEMENT
This is normal and does not indicate any defect or operational failure of unit.
However, children should be prevented from touching the upper part of
the TV.
The TV is making a 'cracking' noise.
A 'cracking' noise may occur when the TV contracts or expands due
changes in the surrounding environment such as temperature or humidity.
This is normal and not a defect.
Cell Defects
Your plasma TV has a panel containing 2,360,000 (HD-level) to 6,221,000
(FHD-level) pixels which require sophisticated technology to produce.
However, there may be a few bright or dark pixels on the screen. These
pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 41°F (5°C)
A still image displayed too long may cause permanent damage to the
PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of
time may leavetraces of the borders on the left, right, tep, or
bottom of the screen. Playing a DVD or a game console may
have a similar effect. Damage caused by the above effect is
not covered by thewarranty.
After-images on the Screen.
Displaying still images from Video games or a PC for longer than a certain
)eriod of time may produce partial after-images. To prevent this effect,
reduce the 'brightness' and 'contrast' when displaying still images for a
long time.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Subject to the requirements, conditions, exclusions and limitations of the original Caution
Limited Warranty supplied with Samsung Electronics (SAMSUNG) products,
and the requirements, conditions, exclusions and limitations contained herein,
SAMSUNG will additionally provide Warranty Repair Service in the United States
on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG
products purchased in the United States, for the warranty period originally
specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG
Authorized Service Center. Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be
presented to the Service Center. Transportation to and from the Service Center
is the responsibility of the purchaser. Conditions covered are limited only to
manufecturing defects in material or workmanship, and only those encountered
in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-
home or on-site services, minimum or maximum repair times, exchanges or
replacements, eccessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
- In the United States : 1-800-SAMSUNG (1-800-726-7864)
- In Canada : 1-800-SAMSUNG
Important User Information
Screen image retention
Do not display a still image (such as that from a video game) on the plasma
display panel for more than a few minutes. Still images can cause screen
image retention (burn in). To avoid such image retention, reduce the degree
of brightness and contrast of the screen when displaying a still image.
Heat on the top of the Plasma TV
The top side of the TV may become hot after long periods of use as heat
dissipates from the panel through the vent hole in the upper part of the TV.
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
.... The glass screen of your PDP TVcan break ifyou accidently drop
the TV.Handle the TV with care. When moving the T_,always have
two or more people pick it up and carry it as a safety precaution.
Do net laythe TVflat on its face er back.
Your Samsung Plasma TV is a high quality television that has been carefully
packaged to protect the integrity of its glass panel and component parts during
shipment. It is, nonetheless, a fragile piece of electronics that requires careful
handling. Refrain from putting undue stress on any part ef the packaging when
shipping or unpacking the TV.Use care when installing the TV.Avoid placing
the TV in a location where it may be struck, exposed to sharp impacts, or
fall. Panel breakage caused by a fall or impact strike is not covered under the
manufacturer's warranty.
r===== .......... ==-==-= ...... = .... =-== .... ===_
m
Contact SAMSUNG WORLDWIDE i
If you haveaJlyquestionsor commentsrelatingto Samsungproducts,pleasecontact _he u
SAMSUNGcus[omercarecenter.
Samsung Electronics
Canada hc., Customer
Service 55 Standish Court
Mississauga, Ontario LSR
Samsung Electronics
America, hc
85 Challenger Road
Ridgefield Park, NJ
L ............................................
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
BN68 04214C 01
-1-
Display icons Used in the Channel List Screens
,_/ A selected channel.
V A Favorite channel.
Q A resewed program.
_3 A program currently being broadcast.
_3The Channel List Tools Menu
The Channel List [bols menu contains most of the functions you
can use on the All Channel, Added Channels, and Favorite List
screens. to view, select a list screen, select a channel, and then
press the TOOLS button.
[] Add / Delete: Delete a channel from or add a channel to the
Added Channels list.
[] Timer Viewing: You can schedule a channel to be displayed
automatically at a set time, even when you are watching another
channel. You must set the current time first in the Time > Clock
function to use Time Viewing.
To schedule a channel, follow these steps:
1. Select a channel in the Added Channels list using the A/T
buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Time Viewing in the Tools menu, and then press the
ENTER _ button. The Time Viewing screen appears.
To delete channels from the Added Channels list, follow these
steps:
1. Select one or more channels in the Added Channels list
using the A/T buttons and the Yellow Select button on your
remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Delete in the Tools menu, and then press the
ENTER _ button.
To add channels to the Added Channels list, follow these steps:
1. Select one or more channels in the All Channels list using the
A/T buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Add in the Tools menu, and then press the ENTER
button.
a, All deleted channels will be shown on the All Channels list.
You add channels back to the Added Channels list on the
All Channels list.
a, A gray-colored channel indicates the channel has been
deleted from the Added Channels list.
a, The Add menu option only appears for deleted channels.
[] Add to Favorite/Delete from Favorite: Lets you add channels
to and delete channels from your Favorites list.
To add channels to the Favorites list,follow these steps:
4. Use the _l/l_ buttons to move from entry field to entry field
and the A/T buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
a, If you select Everyday or Every Week, the date you
select in the Date field becomes the start date for your
scheduled viewing. For Everyday, the TV will turn on
every day, at the time you selected, starting from that
date. For Everyweek, the TV will turn on every week,
on the same day of the week as the start date you
selected, at the time you selected, from that day on. If
you select Once, the TV will turn on once, on the date
and time you selected.
5. Press the ENTER _ button on your remote when done.
a, Only Added channels can be scheduled.
a, Scheduled programs and channels are displayed in the
Programmed List.
a, When you select a digital channel, press the _, button to
vies! the digital program list. If you highlight a program in
the list, and then press the ENTERS(Schedule) button,
you set Timer Viewing for that program directly.
[] Select All: Select all the channels in the displayed channel list.
[] Deselect All: Deselect all the selected displayed channels.
a, You can only select Deselect All when one or more
channels are selected.
1. Select one or more ctqannels in the All Channels list using the [] Channel Name Edit: Analog ctqannels only. Lets you assign a
A/T buttons and the Yellow Select button on your remote, name of up to five ctqaracters to an analog ctqannel. For example,
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Add to Favorite in the Tools menu, and then press the
ENTER _ button.
To delete channels from the Favorites list, follow these steps:
1. Select one or more channels in the Favorite Channels list
using the A/T buttons and the Yellow Select button on your
remote.
Hist, Food, Golf, etc. This makes it easier to find and select a
channel.
[] Auto Program: See Auto Program under Memorizing Channels.
@ Programmed List (on the Channel List Screen)
The Programmed list displays the channels and programs you
have scheduled for viewing using the Time Viewing function. You
can vies!, modify, or delete a show you have scheduled using the
functions on the Programmed List screen Tools menu.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Delete from Favorite in the Tools menu, and then
press the ENTER _ button.
Programmed List Screen Tools Menu
[] Change Into: Change the sctqeduling information for a stqow or
channel you have scheduled.
-5-
_ Advanced Settings
Available in Standard and Movie mode ORly.
Your TV has two kinds of menus, the Main meRu and the various Compared to previous models, new Samsung TVs offer a more
Tools meRus. The Main menu gives you access to most or all of precise picture with more precise controls.
ttqe meRu options available on your TV.The Tools meRus display
a selected number of frequeRtly used menu options that change =& When your TV is connected to a PC, you can only make
depeRding on the screen you are viewing. A Tools menu symbol changes to Gamma and White Balance.
(_'_) in the lower right side of the screeR indicates that a Tools menu [] Color Space (Auto / Native): Auto automatically matches the
is available, range of colors available to create pictures to the color range of
The Main menu has seven primary categories:
,_Picture ,_ Input
,_Sound ,_Application
,_Channel ,_ Support
,_Setup
To view the Main menu, press the MENU button on your remote. To
view a Tools menu, press the TOOLS button on your remote.
a, The menu options that appear in the Main menu depend
on the Source you have selected. For example, if you have
selected the HDMI source, the Channel category will not
appear. To see the Channel category, you must first select TV
in the Source List.
The Menu options are presented below, arranged by Main menu
categories. A Tools button symbol (_'_t_lt_l) next to an option
name indicates the option is also available in one of the Tools
menus.
Mode
Select your preferred picture mode.
a, When your TV is connected to a PC, you can only select
Entertain and Standard.
[] Dynamic: Brightens the screen. Suitable for a bright room.
[] Standard: Suitable for a normally lit room.
[] Movie: Darkens the screen, making it less glary. Suitable for
watching movies in a darkened room.
[] Entertain: Sharpens the picture. Suitable for games.
a, Only available when the TV is connected to a PC.
Cell Light / Contrast / Brightness / Sharpness /
Color / Tint (G/R)
[] Cell Light: Adjusts the brightness of the screen by adjusting the
brightness of the individual pixels.
[] Contrast: Increases or decreases the contrast between dark and
light areas of the picture.
[] Brightness: Adjusts the brightness of the screen. Not as
effective as Cell Light.
[] Sharpness: Sharpens or dulls the edges of objects.
[] Color: Adjusts the color saturation. The higher the Color setting,
the more intense the color. Low settings remove color and the
picture becomes black, white, and gray.
[] Tint: Adjusts the amount of green and red in the picture. As you
increase the amount of green, the amount of red decreases and
vice versa.
a, When the TV is connected to a PC, you can only make
changes to Cell Light, Contrast, Brightness, and
Sharpness.
the video source. Native provides a color range wider than the
color range of the video source.
[] White Balance: Adjusts the color temperature of the picture so
that white objects look white (instead of, for example, slightly
pink or slightly yellow) and the overall color of the picture looks
natural.
R-Offset / G-Offset / B-Offset: Adjusts each color's (red,
green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjusts each color's (red, green,
blue) brightness.
Reset: Resets the White Balance to it's default settings.
[] Gamma: Adjusts the primary color intensity.
[] Dynamic Contrast (Off / Low / Medium / High): Adjusts the
screen contrast.
[] Black Tone (Off / Dark / Darker / Darkest): Selects the black
level to adjust the screen depth. Darker settings make blacks
look darker.
[] Flesh Tone: Adjusts the amount of red in skin tones.
[] Motion Lighting (Off / On): When on, the TV automatically
adjusts the brightness of the screen in response to the
brightness of the room. Inbright light, the screen brightens. In
dim light, the screen dims.
a, Available in Standard mode only.
Picture Options
a, When the TV is connected to a PC, you can only make
changes to the Color Tone, Size and HDMI Black Level.
[] Color Tone (Cool / Standard / Warm1 / Warm2): Cool makes
the picture bluer (cooler). Warm 1 and Warm 2 make the picture
redder (warmer).
a, Warm1 and Warm2 are deactivated when the picture
mode is set to Dynamic.
[] Size: Set the size and aspect ratio of the picture on the screen.
Your cable box or satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use
the TV's f6:9 mode most of the time.
16:9: Sets the picture to the 16:9 wide screen format.
Zoom1 : Provides moderate magnification of the picture. Sides,
top, and bottom are cut off.
Zoom2: Provides larger magnification of the picture. Sides, top,
and bottom are cut off.
Wide Fit: Enlarges the aspect ratio of the picture so the picture
fits the entire screen.
4:3: Sets the picture to the old, 4:3 format and puts black or gray
borders on the right and left of the picture.
a, Do not watch your TV in the 4:3 format for a long time.
Traces of borders displayed ORthe left, right and center of
the screen may cause image retentioR (screen burn) which
is not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when
your TV is inputting HDMI (720p / 1080i / 1080p) or Component
(1080i/1080p) HD signals.
a, HD (High DefinitioR) has a 16:9 aspect ratio and 1080i/1080p
(1920xl 080) or 720p (1280x720) resolutioR.
a, You can adjust and store settings for each external device you
have connected to an input on the TV. Picture Sizes available
by Input Source are listed above and to the right:
-2-
To change the information, follow these steps:
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER _ button.
2. On the Programmed List screen, select the show or channel
entry you want to change, and then press the TOOLS button.
The Tools Menu appears.
3. Select Change Into, and then press the ENTER_ button.
The Time Viewing screen appears.
4. Use the _li/_- buttons to move from entry field to entry field
and the A/_' buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
5. Press the ENTER _ button when done.
[] Cancel Schedules: Cancel a show or channel you have
scheduled.
To cancel a scheduled show or channel, follow these steps:
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER _ button.
2. On the Programmed List screen, select the show or channel
entry you want to cancel, and then press the TOOLS button.
The Tools Menu appears.
3. Select Cancel Schedules, and then press the ENTER_
button. The Cancel Schedule screen appears.
4. Select OK, and then press the ENTER _ button.
[] Information: Display the information for a show or channel you
have scheduled. You can also change the schedule Information.
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER _ button.
2. On the Programmed List screen, select the show or channel
entry you want information for, and then press the TOOLS
button. The Tools Menu appears.
3. Select Information, and then press the ENTER_ button.
The Time Viewing Information screen appears.
4. Select Change Into and press the ENTER _ button
to change information, or select Close and press the
ENTER _ button to close the Information screen.
[] Select All / Deselect All: You can select or deselect all
channels in the channel list.
_3Other Channel Menu Functions
Channel Mode (Added Channels/Favorite
Channels)
Lets you select the channel list displayed when you press the
ACHV (Channel) button on your remote. For example, ifyou
select Favorite Channels, you will only see Favorite channels when
you press the/NCHV button.
Fine Tune
Analog channels only.
Ifthe reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store
operation. Ifthe signal isweak or distorted, fine tune the channel
manually.
a, Select the channel, and then select Fine Tune.
a, Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner.
a_'To reset fine-tuning, select the channel, select Fine Tune, and
then select Reset on the Fine Tune screen.
Plug & Play
Lets you re-run the Plug & Play initial setup procedure. For
instructions, see your Quick Start Guide.
Language
Set the menu language.
a, Choose between English, Espa6ol, and Francais.
_3Setting the Time
Time
a, The time you set will appear when you press the INFO
button.
[] Clock: Set the clock so you can use the various timer features
of the T_
a, If you disconnect the power cord, you have to set the
clock again.
To set the clock, follow these steps:
1. Select Setup >Time > Clock.
2. Press ENTER _ and select Auto or Manual, and then press
ENTER _ again.
If you selected Auto:
The TV will automatically download the correct time from a
digital channel.
- Select Time Zone, and then press the ENTER_ button.
Use theA/_' buttons to select your Time Zone, and then
press ENTER _.
- Select DST (Daylight Savings Time), and then press
ENTER _. Select On if you want to turn the DST
adjustment on and off manually. Select Off to turn off the
DST adjustment. Select Auto if you want the TV to adjust
to DST automatically. Press ENTER _ when done.
a, DST and Time Zone function are only available when
the Clock Mode is set to Auto.
If you selected Manual:
The Clock Set screen appears. Use the A/T buttons to
change the values in each field or use the number buttons to
enter the values directly. Use the _li/l_ buttons to move from
field to field. When done with all the fields, press ENTER _.
a, Available only when Clock Mode is set to Manual.
[] Sleep Timer
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
a, To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you
select. You can set three different on/off timer settings.
a, You must set the clockfirst.
[] On Time / Off Time: Set the hour, minute, am/pm, and
ActNate/InactNate fields for the On Time and Off Time. Use the
_li/_, buttons to move from field to field. Use the A/T buttons
to change the values in each field. To activate the timer with
the setting you have chosen, set the ActNatdlnactNate field to
Activate.
[] Volume: Set the desired loudness.
-6-
ATV,AV,Component (480i, 480p) 16:9, Zoom1,
Zoom2, 4:3
DTV (1080i, 1080p), Component (1080i, 16:9, Wide Fit,
1080p), HDMI (720p, 1080i, 1080p) 4:3, Screen Fit
[] Digital Noise Filter (Off / Low / Medium / High / Auto) : If the
broadcast signal received by your TV is weak, you can activate
the Digital Noise Filter feature to reduce any static and ghosting
that may appear on the screen.
'z Wtqen the signal is weak, try all the Digital Noise Filter
options until the TV displays the best picture.
[] HDMI Black Level (Normal / Low) : For HDMI signals, select
the black level to adjust the screen depttq. Low make blacks look
darker.
'_ Available only in HDMI mode (RGB signals).
[] Film Mode (Off / Auto) : Sets ttqe TV to automatically sense and
process film signals from all sources and adjusts ttqepicture for
optimum quality.
'z Available in ATV, DTV (interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i/1080i).
[] Screen Burn Protection : To reduce the possibility of screen
burn, this unit is equipped with Pixel Stqift screen burn prevention
tectqnology. Pixel Shift moves the picture slightly on the screen.
The Time function setting allows you to program the time
between movement of the picture in minutes.
* Pixel Shift (Off / On) : Using this function, you can set the TV
to move pixels minutely on the PDP screen in a horizontal or
vertical direction to minimize after images on the screen.
Available Pixel Shift Settings and Optimum Settings
Horizontal 0~4 (pixels) 4
Vertical 0~4 (pixels) 4
Time
1~4 rain 4 rain
(minute)
=z The Pixel Shift value may differ depending on ttqe
monitor size (inches) and mode.
=z This function is not available in ttqe Screen Fit mode.
Your TV also has the following additional screen burn
protection functions:
" Scrolling: This function removes after-images on the screen
by illuminating all the pixels on the PDP according to a pattern.
Use this function when there are after images or symbols on
the screen, especially when you displayed a still image on the
screen for a long time.
=z The afterqmage removal function has to run a long time
(approximately 1 hour) to remove after-images on the
screen effectively. If the after-image is not removed after
you run ttqe function, run the function again.
=_ Press any key on ttqe remote control to cancel ttqis
feature.
" Side Gray (Dark/Light): Lets you select the color of the
sidebars your TV displays when you set the screen size to 4:3.
[] Picture Reset (Reset Picture Mode/Cancel): Resets the
picture settings to their factory defaults.
[] Contents: To select what will be turned on when the timer
setting is activated. You can set the TV to turn on a specific
channel or play back contents such as photo or audio files.
Use the _li/_- buttons to move to move to the Contents field,
and then press the ENTER _ button. The Contents screen
appears. Use the ,_/_. buttons to move from field to field. Use
the A/V buttons to change the values in each field.
- TV/USB: Select TV or USB. The USB device must be
connected to your TV before you can select USB.
- Antenna: Displays the current antenna source, Air or Cable.
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB, follow these steps to
select a folder containing MP3 (Music) or JPEG (Photo) files on
the USB device:
a, The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
a, The media may not be playing smoothly when using the
device lower than USB 2.0.
1. Use the _li/_- buttons to move to the field under Music
or the field under Photo, and then press the ENTER
button. The TV displays a single folder (the Root folder) and
the type or name of the device.
2. Press the ENTER _ button. A listof folders on the device
appears.
a, Ifthere are no folders on your device, press the
Yellow select button to select the Root folder, and
then press the RETURN button. The Timer screen
re-appears.
3. Use the A/T buttons to highlight a folder that contains
music or photos, and then press the Yellow select button
to select the folder.
4. Press the RETURN button. The Timer screen re-appears.
[] Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun
or Manual. Ifyou select Manual, you can select the days you
want to activate the timer by using the ._/1_ buttons to highlight
the day, and then pressing the ENTER_ button. To unselect a
day, highlight it, and then press the ENTER _ button.
When you finished making allyour selections on the Timer screen,
press either the ENTER _ or RETURN button.
_3Other Features
Program Ratinq Lock
The Program Rating Lock feature lets you block programs
you've determined are inappropriate for your childreR based on
the program's ratings. To access the Program Rating Lock
feature and make any changes, you must eRter a PIN (persoRal
identification number). To watch a blocked program, you must also
enter the same PIN.
a, Program Rating Lock is not available in HDMI or
Component mode.
a, The default PIN number of a new TV set is "0-0-0-0". You can
set your own PIN using the Change PIN function.
How It Works
When you access the Program Rating Lock Menu functions for
the first time, the PIN input screen appears. Enter 0-0-0-0. The PiN
screen closes and the Program Rating Lock Menu appears. Every
time you access the Program Rating Lock functions, the PIN
screen will appear and you must enter a PIN.
-3-
Mode
[] Standard: Selects the normal sound mode.
[] Music: Emphasizes music over voices.
[] Movie: Provides the best sound for movies.
[] Clear Voice: Emphasizes voices over other sounds.
[] Amplify: increase the intensity of high-frequency sounds to allow
a better listening experience for the hearing impaired.
Equalizer
Available in Standard sound mode only.
[] Balance L/R: Adjusts the balance between the right and left
speaker.
[] 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the loudness of specific bandwidth
frequencies.
[] Reset: Resets the equalizer to its default settings.
SRS TruSurround HD (On/Off)
Available in Standard sound mode only.
SRS TruSurround HD is a patented SRS technology that solves
the problem of playing 5.1 muitichannel content through two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It isfully compatible with all
multichannel formats.
Preferred Language
Digital channels only.
DigitaFTV broadcasts can transmit many audio tracks
simultaneously (for example, simultaneous translations of a program
into foreign languages).
a, You can only select a language from among the ORes being
broadcast.
Multi=Track Sound
Analog channels only.
[] Mono: Select for channels that are broadcasting in mono or if
you are having difficulty receiving a stereo signal.
[] Stereo: Select for channels that are broadcasting in stereo.
[] SAP: Select to listen to the Separate Audio Program, which is
usually a foreign-language translation.
a, Depending on the program being broadcast, you can listen to
Mono, Stereo or SAd
Auto Volume
Because each station has its own broadcasting conditions, the
volume may fluctuate each time you change the channel. This
feature automatically adjusts the volume of a channel by lowering
the sound output when the modulation signal is high or by raising
the sound output when the modulation signal is low.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs aR
uncompressed digital audio sigRal wheR you connect the digital
audio jack on the back of the TV to a digital audio in jack on a
receiver or home theater.
[] Audio Format (PCM/DoIby Digital): You can select the Digital
Audio output (SPDIF)format. The available Digital Audio output
format may differ depending on ttqe input source.
-7-
When the Rating Lock screen appears, select Program Rating
Lock, and then press ENTER _. Select ON, and then press the
ENTER _ key again. Depending on what type of programs or
movies you want to block, select one of the options on the screen,
and then press the ENTER _ button. The options are listed below:
[] TV Parental Guidelines: You can block TV programs based
on their ratings. This function allows you to control what your
children are watching.
[] MPAA Rating: You can block movies based on their MPAA
ratings. The Motion Picture Association of America (MPAA) has
implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for
children.
[] Canadian English: You can block TV programs based on their
Anglophone Canadian ratings.
[] Canadian French: You can block TV programs based on their
French Canadian ratings.
[] Downloadable U.S. Rating: Parental restriction information can
be used while watching DTV channels.
Locking/Blocking Programs or Movies
You lock or block programs and/or movies in essentially the same
way for each option. Each option displays a grid or table. All the
tables have ratings listed on the left. The TV Parental Guidelines
option also has kinds of content listed across the top: ALL: Lock all
TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation
/ L: Adult Language / D: Sexually Suggestive Dialog.
To IocWblock movies or shows with certain ratings and/or kinds of
content, click the square next to the rating and/or under the kind of
content. A lock appears. To unlocWunblock, click the square again.
When you click a low rating, all the ratings above itwill also display
locks. You can also Allow All or Lock All. When done, press the
RETURN button on your remote.
[] Change PIN: The Change PIN screen will appear. Choose any
4 digits for your PIN and enter them in Enter New PIN fields.
Re-enter the same 4 digits in Confirm New PIN fields. When the
Change PIN screen disappears, press the OK button. The TV
has memorized your new PIN.
a, If you forget the PiN, press the remote-control buttons in
the following sequence, which resets the pin to "0-0-0-0" :
POWER (off) _ MUTE _ 8 _ 2 _ 4 _ POWER (on)
Game Mode (On/Off)
When you connect a game console such as a PlayStation TM
or Xbox TM to your TV,you can enjoy a more realistic gaming
experience by turning on the Game Mode function.
a, Precautions and limitations for game mode:
° Before you disconnect the game console and connect another
external device, set Game Mode to Off in the setup menu.
° Ifyou display the TV menu in Game Mode, the screen shakes
slightly.
a, Game Mode is not available when the input source is set to
TV.
a, After connecting the game console, set Game Mode to On.
You may notice slightly reduced picture quality.
Caption
(On-Screen Text Dialogue)
[] Caption: You can switctq the caption function on or off. If
captions are not available, they will not be displayed on the
screen.
The Caption feature does not work in Component or
HDMI mode.
a, By connecting the TV to a receiver or home theater with
Dolby Digital and 5.1ch speakers and selecting Dolby
Digital, you can maximize your interactive 3D sound
experience.
[] Audio Delay: Lets you correct timing mismatches between the
audio track and the video when you are watching the TV and
listening to digital audio output from the TV through an external
device such as an AV receiver. When you select Audio Delay, a
slider appears. Use the left and right arrow buttons to adjust the
slider. Press ENTER _ when done (0ms _ 250ms).
Speaker Settings
[] Speaker Select (External Speaker / TV Speaker)
If you are listening to the sound track of a broadcast or movie
through an external receiver, you may hear a sound echo caused
by the difference in decoding speed between the TV's speakers
and the speakers attached to your audio receiver. If this occurs, set
the TV to External Speaker.
a, When you set Speaker Select to External Speaker, the
TV's speakers are turned off. You will hear sound through the
external speakers only. When you set Speaker Select to TV
Speaker both the TV's speakers and the external speakers
are on. You will hear sound through both.
a, When Speaker Select is set to External Speaker, the
VOLUME and MUTE buttons will not operate and the sound
settings will be limited.
a, If there is no video signal, both the TV's speakers and the
external speakers will be mute.
Sound Reset
[] Reset All: Resets all sound settings to the factory defaults.
_3 Memorizing Channels
WheR you first set up your TV using Plug & Play, the TV memorized
the channels that were available over the air or through your cable
system and added them to the Channel List. The Antenna and
Auto program functions described below let you re-run the channel
memorization function without having to re-run the Plug & Play
procedure.
Antenna (Air / Cable)
Before your television can memorize the available channels, you
must select your TV's signal source, Air (using an antenna) or Cable.
Select Menu >Channel > Antenna > Air or Cable. After you have
selected the signal source, go on to the Auto Program function.
a, Selecting the signal source using the Antenna function also
determines the signal source the TV is tuned to. For example,
if you receive your TV signal over the air, and you select Cable,
you will see only snow. You must select Air to see a picture.
Auto Program
The Auto Program functioR memorizes all channels that are
available over the air or through your cable system and adds them to
the Channel List.
To start Auto Program, follow these steps:
1. Pust_ MENU rm _ Channel -_ ENTER _ on your remote. The
Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your TV
signal.
Air
If your TV is connected to an antenna choose Air, and then press
ENTER _. The TV will automatically start memorizing ctqannels.
Cable
Ifyour TV is connected to a cable outlet, choose Cable, and then
press ENTER _. Go to Step 3.
Auto
Ifyou choose Auto, and then press ENTER _, the TV will
automatically select the correct Antenna source. Go to Step 3.
3. On the Cable Type screen, use the _li/_-/_k/_ buttons to select
the type of digital and analog cable systems you have: STD, HRC,
or IRC. Most systems are STD (Standard). When done, select
Start, and then press ENTER _. The TV will start memorizing
channels.
a, Channel memorization can take up to 45 minutes, depending
on your cable system.
a, Memorized channels are added to the Added Channel
list. These are the channels you will see when you use the
Channel buttons on your remote.
Clear Scrambled Channel
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20_30 minutes.
a, Press the ENTER _ button to stop the Clear Scrambled
Channel.
a, This function is only available in Cable mode.
Managing Channels
Channel List
See your list of Added channels, Favorite channels, or channels
you've scheduled for viewing. Add or delete Favorite channels, add
or delete channels from the Added Channels list, schedule channels
or programs for viewing. Watch a channel by selecting the channel
in the All Channels, Added Channels, or Favorite screen, pressing
the A / _ buttons, and then pressing the ENTER _ button.
Channel List Screens icons are listed on the left side. Select an
icon using the _/_ buttons to view each list.
[]_1 Channels: Shows all currently available channels including
those you deleted from the Added channels list.
[] _ Added Channels: Shows all Added channels. These are the
channels that appear when you press the CH button.
[] _ Favorite: Shows all favorite channels.
[] (_ Programmed: Shows all channels and programs currently
scheduled using Timer Viewing.
Remote control buttons active on the Channel List screen.
° Green (Zoom): Enlarges or shrinks a channel number.
° Yellow (Select): Move the cursor to a channel. Press the Yellow
button to select the channel. A ,,/ mark appears. Repeat to select
additional channels. Then, open the Tools menu and apply a
function to the channels you selected.
o r_ (Tools): Displays the Channel List Tools menu. (The Tools
menus may differ depending on the situation.)
-4-
[] Caption Mode: You can select the desired caption mode.
Default / CCl ~CC4 / Text1 ~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel
mode or when a signal is supplied from an external device to the
TV. (Depending on the broadcasting signal, the Analog Caption
function may or may not work with digital channels.)
Default / Service1 ~Service6 / CCl ~CC4 / Text1 ~Text4: (Digital
channels only) The Digital Captions function works with digital
channels.
a, Service1~6 may not be available in digital caption mode
depending on the broadcast.
[] Digital Caption Options: (Digital channels only)
Size: Options include Default, Small, Standard and Large. The
default is Standard.
Font Style: Options include Default and Styles 0 to 7. The default
is Style 0.
Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the color
of the letters. The default is White.
Background Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
background color of the captions. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options
include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption
background. Options include Default, Transparent, Translucent,
Solid and Flashing.
Return to Default: This option sets each Size, Font Style,
Foreground Color, Background Color, Foreground Opacity and
Background Opacity to its default.
a, Digital Caption Options are available only when you can
select Default and Service1 ~ Service6 in Caption Mode.
a, The Foreground and Background cannot be set to the same
color.
Melody
Lets you control whether a melody plays when the TV is turned on
or off.
a, The Melody does not play:
° When no sound is output from the TV because the MLJTEbutton
has been pressed.
° When no sound is output from the TV because the volume has
been reduced to minimum with the VOL ._button.
° When the TV is turned off by the Sleep Timer function.
Auto Protection Time
[] Auto Protection Time (Off / 10 min / 20 rain / 40 min / 1 hour): If
the screeR remains idle with a still image for a certain period of time
you define, the screeR saver is activated to prevent the formation of
ghost images on the screen.
Eco Solution
[] No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets
how quickly the TV switches to standby mode, if no picture is
being received.
a_ Disabled when the PC is in power saving mode.
[] Auto Power Off (Off / On): The TV will be automatically turned off
when no user operation is detected for 4 hours.
Self Diagnosis
[] Picture Test: Use to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions on
the screen.
[] Sound Test: Use the built-in melody sound to check for sound
problems. If the problem occurs during the test, select Yes and
follow the directions on the screen.
[] Signal Strength: (Digital channels only) An HD channeFs reception
quality is either perfect or the channels are unavailable. Adjust your
antenna to increase signal strength.
[] Reset: Reset all settings to the factory defaults.
a_ The PIN input screen appears before the setup screen.
a, Enter your 4-digit PIN. Change the PIN using the Change
PIN option.
Software Upgrade
Software Upgrade CaR be performed by dowRIoadiRg the latest
firmware from samsung.com to a USB memory device.
HD Connection Guide
Refer to this hqformation when connecthqg external devices to the T_
Contact Samsung
View this information when your TV does not work properly or wheR
you want to upgrade the software. You can find information regarding
our call centers and how to download products and software.
Enjoy photos, music and/or movie files saved on a r----q
USB Mass Storage Class (MSC) device.
Cl Connecting a USB Device
1. Turn ORyour TV.
2. Connect a USB device containing photo, music, and/or movie files
to the USB jack on the back of the TV. A pop up window appears.
3. Press the MED_A,P button on your remote. The Media Play menu
appears.
[] Energy Saving (Off / Low / Medium / High / Picture Off) : _ Using the Media Play Menu
This adjust the brightness of the TV iRorder to reduce power
consumption. If you select Picture Off, the screen is turned off, but
the sound remains on. Press any button except the volume button
to turn on the screen.
[] Eco Sensor (Off / On) : To enhance power savings, the picture
settings will automatically adapt to the light in the room.
a, If you adjust Cell Light in the Picture menu, the Eco Sensor
will be set to Off.
Min Cell Light : When Eco Sensor is On, you can manually adjust
the minimum screen brightness.
a, If Eco Sensor is On, the display brightness may change To open Media Play in the Menu, follow these steps:
(become slightly darker or brighter) depending on the light
intensity in your room. You can control the screen's minimum 1. Press the MENU button. Then, press the or T button to select
brightness with the Min Cell Light function. Application on the left, and then press the ENTER _ button.
-8-