Fluke 718 Pressure Calibrator
The complete solution to pressure calibration
The Fluke 718 pressure calibrator family (4 models)
provide a total pressure calibration solution for
transmitters, gauges and switches. This compact
pressure calibration solution is about a third of the
size of comparable instruments and weighs just one
kilogram (two pounds). The unique, easy to clean
out access ports built into the pump protect the
pump from fl uids and provides the ability to service
the pump without disassembly.
Pressure Source and Milliamp Measurement to
calibrate and maintain almost any pressure device
Integrated pump is easily cleaned when
accidentally exposed to fl uids:
– reduces cost of ownership and repairs
– service the pump in the fi eld
Error % calculation for quicker pass/fail decision
Best in class mA accuracy of 0.015 % for better
measurement confi dence and workload coverage
Min/Max/Hold to capture changing measurements
Switch test feature for quicker and more accurate
New 1 and 300 PSI pressure ranges mean fewer
1, 30, 100 & 300 PSI ranges now available
95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C);
45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)
Random, 2 g, 5 Hz – 500 Hz
CSA C22.2 No. 1010.1: 1992
EN50082-1: 1992 and EN55022: 1994 Class B
Size/weight (717 with holster):
(7.93 in x 3.86 in x 2.06 in) 600 g (21 oz)
Size/weight (718 with holster):
(8.50 in x 3.72 in x 2.60 in) 992 g (35 oz)
9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two
4 to 20 hours typical, depending on functions used
Three years (one year on pressure pump in Fluke 718)
LCD, 5 digit pressure and current simultaneous
For use with non-corrosive gasses