Fluke 700P01Ex Limited Warranty

Download Limited warranty of Fluke 700P01Ex Accessory for Free or View it Online on All-Guides.com. This version of Fluke 700P01Ex Manual compatible with such list of devices, as: 700P01Ex, 700P05Ex, 700P24Ex, 700P29Ex, 700PA4Ex

Fluke 700P01Ex Limited warranty - Page 1
1
Fluke 700P01Ex Limited warranty - Page 2
2
Fluke 700P01Ex Limited warranty - Page 3
3
Fluke 700P01Ex Limited warranty - Page 4
4
PN 2106534
(English)
May 2004
2004 Fluke Corporation. All rights reserved. Printed in USA
Product Compliance Markings
P ( II 1 G Eex ia IIC T4
0344
) I.S. Class I Div. 1 Groups A-D T4
221839 AEx ia IIC T4
Ta = 0 °C… + 50 °C
Ex Cerification by Mensor Corporation, San Marcos, TX USA
EMC: Complies with EN61326, Criteria C.
Limited Warranty
Each Fluke product is warranted to be free from defects in material and
workmanship under normal use and service. The warranty period is one year
and begins on the date of shipment. Parts, product repairs and services are
warranted for 90 days. This warranty extends only to the original buyer or end
user customer of a Fluke authorized reseller, and does not apply to fuses,
disposable batteries or to any product which, in Fluke’s opinion, has been
misused, altered, neglected or damaged by accident or abnormal conditions of
operation or handling. Fluke warrants that software will operate substantially in
accordance with its functional specifications for 90 days and that it has been
properly recorded on nondefective media. Fluke does not warrant that software
will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused
products to enduser customers only but have no authority to extend a greater or
different warranty on behalf of Fluke. Warranty support is available if product is
purchased through a Fluke authorized sales outlet or Buyer has paid the
applicable international price. Fluke reserves the right to invoice Buyer for
importation costs of repair/replacement parts when product purchased in one
country is submitted for repair in another country.
Fluke’s warranty obligation is limited, at Fluke’s option, to refund of the purchase
price, free of charge repair, or replacement of a defective product which is
returned to a Fluke authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center
or send the product, with a description of the difficulty, postage and insurance
prepaid (FOB Destination), to the nearest Fluke authorized service center. Fluke
assumes no risk for damage in transit. Following warranty repair, the product
will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke
determines that the failure was caused by misuse, alteration, accident or
abnormal condition of operation or handling, Fluke will provide an estimate of
repair costs and obtain authorization before commencing the work.
Following repair, the product will be returned to the Buyer transportation prepaid
and the Buyer will be billed for the repair and return transportation charges (FOB
Shipping Point).
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, WHETHER ARISING
FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT,
RELIANCE OR ANY OTHER THEORY.
Since some countries or states do not allow limitation of the term of an implied
warranty, or exclusion or limitation of incidental or consequential damages, the
limitations and exclusions of this warranty may not apply to every buyer. If any
provision of this Warranty is held invalid or unenforceable by a court of
competent jurisdiction, such holding will not affect the validity or enforceability of
any other provision.
®
700PEx Series Pressure Modules
Instruction Sheet
Introduction
The Fluke 700PEx Series Pressure Modules allow you to
measure pressure with Fluke intrinsically safe calibrators
such as the 718Ex. Read this sheet before using the
pressure modules. This instruction sheet contains
specifications and information about how to avoid damaging
the pressure modules and describes how to safely use them
in hazardous locations. Refer to your calibrator’s Users
Manual
for complete operating instructions.
The pressure modules measure pressure using an internal
microprocessor. They receive operating power from and
send digital information to the intrinsically safe calibrators.
Gage pressure modules have one pressure fitting and
measure pressure with respect to atmospheric pressure.
Differential pressure modules have two pressure fittings
and measure the difference between the applied
pressure on the high fitting versus the low fitting. A
differential pressure module functions like a gage
module when the low fitting is open.
Absolute pressure modules measure relative to a
vacuum.
In Case of Difficulty
For service or calibration, call your nearest authorized Fluke
Service Center.
For application or operation assistance or information on
Fluke products, call:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's Web site at www.fluke.com
.
To register your product, visit register.fluke.com
Fluke Corporation Fluke Europe B.V.
P.O. Box 9090 P.O. Box 1186
Everett, WA 98206-9090 5602 B.D. Eindhoven
USA The Netherlands
Box Contents
Each pressure module comes with an installed strap and
instruction sheet. All pressure modules, with the exception of
the 700P29Ex, come with 1/4 NPT to 1/4 ISO metric
adapters.