TI CBL 2 Supplementary Manual
Download Supplementary manual of TI CBL 2 Calculator, Other for Free or View it Online on All-Guides.com.
Brand: TI
Category: Calculator , Other , Radio
Type: Supplementary manual for TI CBL 2
Pages: 4 (0.05 Mb)
1
2
3
4
CBL 2 Troubleshooting Guide
Screen
Explanation
This screen appears when too much time has passed on a
screen without activity. This timeout feature takes advantage
of the Automatic Power Down (APD) feature of the
calculator and CBL 2 to conserve battery power.
♦
Press À YES to continue the program.
♦
Press Á NO to quit.
This screen appears when CBL 2 is not connected to the
calculator or when CBL 2 needs new batteries.
♦
Check the connection between CBL 2 and your TI
calculator. Firmly push in the link cable, and then
choose 1: INTERFACE.
♦
Check batteries in the CBL 2. Disconnect the calculator
from the CBL 2; then press TRANSFER on the CBL 2. If the
CBL 2 does not make a sound or light the red LED, change
the batteries in the CBL 2.
If you choose 1: INTERFACE without correcting the problem,
the link error screen appears.
Check the connection and batteries as explained above and
then press ENTER.
This screen appears when:
♦
The CBL 2 has collected data and that data has not been
retrieved to the calculator.
or
♦
The user exits DataMate in the middle of data collection
(possibly by pressing ON) and then restarts DataMate.
Press ENTER. Then choose one of the following:
♦
To retrieve the data, press
·
TOOLS and then
Á
RETRIEVE
DATA.
♦
To delete the data, press CLEAR to reset the CBL 2.
The DataMate main screen shows a non-autoID sensor from
a previous experiment even though the sensor is no longer
connected. (For example, the screen on the left shows a
Relative Humidity sensor even though the sensor was
removed and DataMate was restarted.)
Press ‘ to reset the CBL 2 to initial conditions. (In
general, whenever you see something on the screen that
does not look correct, press ‘ to reset.)