Samsung HT-WDC10 User Manual
Download Operation & user’s manual of Samsung HT-WDC10 Docking Station, Home Theater System for Free or View it Online on All-Guides.com.
Brand: Samsung
Category: Docking Station , Home Theater System
Type: Operation & user’s manual for Samsung HT-WDC10
Pages: 6 (1.14 Mb)
1
2
3
4
5
6
Wireless Dock Cradle for iPod/iPhone
Model : HT-WDC10
Thank you for purchasing this product (HT-WDC10).
Turn on the main unit and connect the iPod/iPhone to the Wireless transmitter.
Refer to the user manual and set the "W.iPod" mode as appropriate.
✴
Compatible with Samsung Speaker System (HW-D450/HW-D451, HW-D550/HW-D551 series)
✴
Compatible with Samsung Blu-ray Home Entertainment System which has wireless rear speaker
accessory in the box. (HT-D6xxxW,D7xxxW)
✴
If the iPod/iPhone does not automatically make wireless connection to the Home Theater, ID setting
must be made manually.
Set an ID of the Subwoofer before setting a Transmitter ID.
(refer to the Home Theater's manual)
1. Turn off your Home Theater.
2. Specify the product ID depending on the model.
Model How To
HW-D
In Stand-by mode, press and hold the "3D Sound"
key on the remote control for about 5 seconds.
BD-HTS
In Stand-by state, press "4--7--6--3" keys in
order on the remote control.
3. Connect the iPod/iPhone to the Wireless transmitter.
4. Turn on the iPod/iPhone. Press the "ID SET" button on the back of the Wireless transmitter for 5
seconds. The link light on the wireless transmitter will blink fast.
5.
Turn on your Home Theater (make sure the wireless transmitter's Link LED in ON). To listen to music from
your iPod/iPhone over the Home Theater, select the iPod mode as the Home Theater's source.
✴
When iPod is connected to WDC10, both the Home Theater and the iPod Volume are operated together.
When using the WDC10 with the main unit, do not pair the subwoofer and iPod/iPhone at the same time.
If you pairing at the same time, iPod/iPhone and subwoofer may not be connected to the sound bar.
Display
Function
LINK (Blue LED) STANDBY (Red LED)
LED ON
Pairing successfully completed STANDBY
LED BLINK (Long blink) Processing iPod/iPhone LOW BATTERY
LED BLINK (Short blink) Processing pairing Pairing failed
OPERATION STATUS OF THE WIRELESS TRANSMITTER'S LED
If you use the main unit nearby a wireless device such as a laptop computer, an AP, or Wifi , any
unstable operation error can happen.
▪
STANDBY
LINK
CHARGE