VTech MA3222 User's Manual

Download Operation & user’s manual of VTech MA3222 Portable Speakers for Free or View it Online on All-Guides.com.

Brand: VTech

Category: Portable Speakers

Type: Operation & user’s manual

Model: VTech MA3222 , VTech MA3222-16 , VTech MA3222-17

Pages: 2 (2.45 Mb)

Download VTech MA3222 Operation & user’s manual

VTech MA3222 Operation & user’s manual - Page 1
1
VTech MA3222 Operation & user’s manual - Page 2
2
User’s manual
MA3222/MA3222-16/MA3222-17
DECT 6.0 portable speaker with
BLUETOOTH
®
wireless technology
Congratulations
on purchasing your new VTech product. Before
using this product, please read Important
safety instructions below.
For support, shopping, and everything
new at VTech, visit our website at
www.vtechphones.com.
Check for the compatibility list at
www.vtechphones.com/ma3222/
compatibility_list.
Register online to get an additional
3-month warranty!
Visit www.vtechphones.com.
Registration
Register your product online for
enhanced warranty support.
Product news
Learn about the latest VTech
products.
Important safety
instructions
When using this product, basic safety precautions
should always be followed to reduce the risk of re,
electric shock and injury, including the following:
Read and understand all instructions.
Follow all warnings and instructions marked on
the product.
Unplug this product from any power source before
cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
This product is for indoor use only.
Do not use this product near water such as near a
bath tub, wash bowl, kitchen sink, laundry tub or
swimming pool, or in a wet basement or shower.
Do not place this product on an unstable table,
shelf, stand or other unstable surfaces.
This product should be operated only from the type
of power source indicated on the marking label.
If you are not sure of the type of power supply in
your home or ofce, consult your dealer or local
power company.
Never push objects of any kind into this product
through the slots in speaker because they may
touch dangerous voltage points or create a short
circuit. Never spill liquid of any kind on the product.
To reduce the risk of electric shock, do not
disassemble this product, but take it to an authorized
service facility. Opening or removing parts of the
speaker other than specied access doors may
expose you to dangerous voltages or other risks.
Incorrect reassembling can cause electric shock
when the product is subsequently used.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Unplug this product from the power source and
refer servicing to an authorized service facility
under the following conditions:
When the power supply cord or plug is damaged
or frayed.
If liquid has been spilled onto the product.
If the product has been exposed to rain or water.
If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operation
instructions. Improper adjustment of other
controls may result in damage and often requires
extensive work by an authorized technician to
restore the product to normal operation.
If the product has been dropped and damaged.
If the product exhibits a distinct change
in performance.
11. Avoid using a telephone (other than cordless)
during an electrical storm. There is a remote risk
of electric shock from lightning.
12. The equipment is to be supplied from an identied
USB port complying with the requirements of
Limited Power Source.
10.
Parts checklist
Your product package contains the
following items. Save your sales receipt
and original packaging in case it is
necessary to ship this product for
warranty service.
Speaker with rechargeable
battery pack installed
USB cable
User’s manual
LED indicators
Status indicator
After you have paired up and registered
your devices, which can be Bluetooth,
DECT, or both, the status indicator will
behave as following:
Registered with Bluetooth device
The status indicator will operate in blue.
LED behavior Description
Turns on steady for
3 seconds
Successful
registration
Flashes every
8 seconds
Connected and
ready to use
Flashes Incoming call
Turns on steady In use
Flashes slowly On mute
Flashes red and blue
4 times
Registration
failed
Registered with DECT device
The status indicator will operate in red.
LED behavior Description
Turns on steady for
3 seconds
Successful
registration
Flashes every
8 seconds
Connected and
ready to use
Flashes Incoming call
Turns on steady In use
Flashes slowly On mute
Flashes red and blue
4 times
Registration
failed
Registered with Bluetooth and
DECT devices
The status indicator will operate in violet.
LED behavior Description
Turns on steady for
3 seconds
Successful
registration
LED behavior Description
Flashes every
8 seconds
Connected and
ready to use
Turns on steady Three-way
conversation in
use
Flashes slowly Three-way
conversation on
mute
Flashes red and blue
4 times
Both Bluetooth
and DECT
devices are not
registered
CHARGE indicator
LED behavior Description
Turns on steady blue Charging battery
Flashes blue quickly Low battery
BC
CAUTION: To reduce the risk of re or injury to
persons or damage to the product, read and follow
these instructions carefully:
Use only the provided nickel-metal hydride
rechargeable battery pack (BT203665). Replace
only with the correct type of batteries (BT204665).
Dispose of used batteries according to the
instructions in this user’s manual.
This product contains nickel-metal hydride
rechargeable battery pack. Exercise care in
handling batteries in order not to create a short
circuit with conductive material such as rings,
bracelets and keys. The battery or conductor may
overheat and cause harm. Observe proper polarity
between the battery and the metallic contacts.
Dispose of these batteries in a safe manner. Do not
burn or puncture the battery. Like other batteries of
this type, if burned or punctured, they could release
caustic material which could cause injury.
Do not disassemble the product. There are no
user-serviceable parts inside. Refer to qualied
service personnel for servicing.
Make a Bluetooth call
Use your connected Bluetooth enabled
cell phone to make a call.
Answer a Bluetooth call
When there is an incoming Bluetooth
call, press .
End a Bluetooth call
Press or use your cell phone to end
the call.
Make a DECT call
Use your DECT phone to make a call.
Press on the MA3222, then press
OFF or place the handset in the
telephone base on your DECT phone to
exit the call.
Answer a DECT call
When there is an incoming DECT call,
press .
End a DECT call
Press .
Switch between calls
In Bluetooth mode, you will hear call
waiting tone when:
there is an incoming Bluetooth call.
Press CALL WAITING to hold the rst
call and answer another call. You need
to use the Bluetooth enabled device to
resume.
there is an incoming DECT call. Press
and hold CALL WAITING to hold the
rst call and answer another call. Press
and hold CALL WAITING to resume.
In DECT mode, you will hear call waiting
tone when:
there is an incoming DECT call. Press
CALL WAITING to hold the rst call
and answer another call. Press CALL
WAITING to resume.
there is an incoming Bluetooth call. Press
and hold CALL WAITING to hold the rst
call and answer another call. Press and
hold CALL WAITING to resume.
Operation
To pair the MA3222 to another
Bluetooth enabled device:
Switch off other paired devices.
Follow Step 1 through Step 4 above to
pair the new device.
Switch on the devices that are
switched off in Step 1. The MA3222 will
automatically connect to the last two
connected devices.
To connect to two Bluetooth enabled
devices at the same time:
When the rst Bluetooth enabled
device is connected, turn on another
paired Bluetooth device.
Select to connect with MA3222 using
the second Bluetooth enabled device.
If the pairing process fails, switch off the
speaker and try again.
Whenever the MA3222 is switched on,
it will automatically connect to the last
connected device.
1.
2.
3.
1.
2.
Bluetooth wireless technology operates
within a short range (a maximum of
approximately 30 feet). Make sure there
are no big physical obstacles between the
MA3222 and the paired Bluetooth devices.
Once a Bluetooth enabled device is
successfully paired, you do not need to
repeat the pairing procedure again unless
you want to replace it with a new device.
Only two paired devices can be connected
at a time.
Switch on the speaker.
Turn on the Bluetooth feature on your
Bluetooth device to search for
the MA3222.
Press and hold until the status
indicator ashes violet.
Once your Bluetooth device nds
VTECH-MA3222, press the appropriate
key to conrm. You may be prompted
to enter the PIN. The default PIN is
0000. When the MA3222 successfully
pairs to your Bluetooth enabled device,
the status indicator turns steady blue
for 3 seconds. You will hear a long
conrmation beep.
1.
2.
3.
4.
Pair to a Bluetooth device
Charge battery
When rst purchased, the rechargeable
battery pack is installed. You may follow
the steps below for charging.
The speaker must be turned on
for charging.
Connect the speaker to a USB
charging port, using the provided USB
cable. You will hear a short beep. The
CHARGE indicator turns on steady
blue while charging. The battery is fully
charged after 8 hours of continuous
charging. When the speaker is fully
charged, the CHARGE indicator
turns off.
You will hear two beeps in talking
mode if battery is low.
1.
2.
Search for device
When you switch on the speaker, the
status indicator turns on violet for 3
seconds and then ashes to search for
any paired or registered device.
You may stop device search for initial
installation by pressing .
Once the speaker found a device, the
status indicator turns on as below:
LED behavior Description
Turns on steady
blue for
3 seconds
Paired Bluetooth
device is found and
re-connected
Turns on steady
red for 3 seconds
Registered DECT
device is found and
re-connected
LED behavior Description
Turns on steady
violet for
3 seconds
Both Bluetooth and
DECT devices are
found and
re-connected
Alternate red and
blue
No device is found
and re-connected
If you would like to stop the ten seconds
device search and go to the registration
mode, you can press and hold to pair
with Bluetooth device. Alternatively, you
can press and hold Vol+ and Vol- together
to register to DECT device.
Overview
Register to a DECT 6.0
telephone
The registration and deregistration method
may vary for different DECT phones. If
this is the case, see the user’s manual of
your DECT phone on how to register and
deregister the MA3222 to your
DECT phone.
To register:
Switch on the speaker.
Press and hold VOL
+
and VOL-
simultaneously until the status indicator
ashes red.
Press and hold FIND HANDSET/
FIND HS/PAGE/HOLD (whichever is
applicable) on your DECT telephone
until the IN USE light turns on.
You hear a long conrmation beep from
the speaker and the status indicator
turns steady red for 3 seconds when
the registration process completes.
To deregister:
Press and hold FIND HANDSET/
FIND HS/PAGE/HOLD (whichever is
applicable) on your DECT telephone
until the IN USE light ashes.
Immediately press the same key again.
Switch off the speaker and switch it
back on. The status indicator ashes
red and blue 4 times if there is no
paired device.
When the deregistration process
completes, all devices will be deregistered.
Follow the instructions on the user’s
manual of your DECT phone to register the
handset(s) back to your DECT phone.
1.
2.
3.
4.
1.
2.
3.
Status indicator
VOL-
VOL
+
USB port
(for charging)
CHARGE
indicator
Microphone
CALL
WAITING
ON/OFF switch
SAVE THESE INSTRUCTIONS