Vinotemp WM-2500SSD Installation, Operation & Care Manual

Download Installation, operation & care manual of Vinotemp WM-2500SSD Kitchen Appliances, Wine Cooler for Free or View it Online on All-Guides.com. This version of Vinotemp WM-2500SSD Manual compatible with such list of devices, as: WM-2500SSD, WM-4500SSD, WM-6500SSD, WM-8500SSD

Vinotemp WM-2500SSD Installation, operation & care manual - Page 1
1
Vinotemp WM-2500SSD Installation, operation & care manual - Page 2
2
Vinotemp WM-2500SSD Installation, operation & care manual - Page 3
3
Vinotemp WM-2500SSD Installation, operation & care manual - Page 4
4
Vinotemp WM-2500SSD Installation, operation & care manual - Page 5
5
Vinotemp WM-2500SSD Installation, operation & care manual - Page 6
6
Vinotemp WM-2500SSD Installation, operation & care manual - Page 7
7
Vinotemp WM-2500SSD Installation, operation & care manual - Page 8
8
Vinotemp WM-2500SSD Installation, operation & care manual - Page 9
9
Vinotemp WM-2500SSD Installation, operation & care manual - Page 10
10
Vinotemp WM-2500SSD Installation, operation & care manual - Page 11
11
Vinotemp WM-2500SSD Installation, operation & care manual - Page 12
12
Vinotemp WM-2500SSD Installation, operation & care manual - Page 13
13
Vinotemp WM-2500SSD Installation, operation & care manual - Page 14
14
Vinotemp WM-2500SSD Installation, operation & care manual - Page 15
15
Vinotemp WM-2500SSD Installation, operation & care manual - Page 16
16
Vinotemp WM-2500SSD Installation, operation & care manual - Page 17
17
Vinotemp WM-2500SSD Installation, operation & care manual - Page 18
18
Vinotemp WM-2500SSD Installation, operation & care manual - Page 19
19
Vinotemp WM-2500SSD Installation, operation & care manual - Page 20
20
Vinotemp WM-2500SSD Installation, operation & care manual - Page 21
21
Vinotemp WM-2500SSD Installation, operation & care manual - Page 22
22
Vinotemp WM-2500SSD Installation, operation & care manual - Page 23
23
Vinotemp WM-2500SSD Installation, operation & care manual - Page 24
24
Vinotemp WM-2500SSD Installation, operation & care manual - Page 25
25
Vinotemp WM-2500SSD Installation, operation & care manual - Page 26
26
Vinotemp WM-2500SSD Installation, operation & care manual - Page 27
27
Vinotemp WM-2500SSD Installation, operation & care manual - Page 28
28
Vinotemp WM-2500SSD Installation, operation & care manual - Page 29
29
Vinotemp WM-2500SSD Installation, operation & care manual - Page 30
30
Vinotemp WM-2500SSD Installation, operation & care manual - Page 31
31
Vinotemp WM-2500SSD Installation, operation & care manual - Page 32
32
- 22 -
evaporator unit are not necessary the same as the listed refrigeration
line sizes.
If the condensing unit is installed above the evaporator unit, use the
suction line one listed size smaller.
Expansion and solenoid valves have been installed on the liquid line in
the evaporator unit.
1) The installation order starts from condensing unit (including receiver and
discharge valve), liquid line filter-drier, moisture-liquid indicator, liquid line, to
evaporator unit (including liquid line connection, solenoid valve, expansion
valve, and suction line connection), returning to insulated suction line, suction
valve and then back to condensing unit.
2) If the condensing unit is located below the evaporator unit, use inverted U
trap to prevent liquid from flooding back to the compressor; if the elevation
difference is more than 10 ft or the line set exceeds 75 ft, use both inverted U
trap and suction accumulator.
3) If the condensing unit is located more than 10 ft above the evaporator unit,
use U trap to aid oil returning to the compressor.
4) Complete pipe brazing, check solenoid valve and expansion valve restrictions
and test leak.
5) Hook up the drain line and check if water drains.
The line sizes and refrigerant charges are listed as follows.
Model No
Equivalent
Line Set
Liquid
Line
Suction Line Drain Line
Recommended
Charge
WM-2500SSD <= 75 FT 1/4” OD 3/8” OD 1/2” OD R134a/19 OZ
WM-4500SSD <= 75 FT 1/4” OD 1/2” OD 1/2” OD R134a/26 OZ
WM-6500SSD <= 75 FT 1/4” OD 1/2” OD 1/2” OD R134a/32 OZ
WM-8500SSD <= 75 FT 3/8” OD 5/8” OD 1/2” OD R134a/40 OZ
7. Connecting Electrical Wires
Connect all electrical components using the wiring diagrams in accordance with
all state and local codes.
8. Evacuating, Charging and Starting the system
CAUTION:
Always use the superheat and subcooling, pressure readings to charge
refrigerant properly; the listed charge amounts are used for reference
only.
If the unit is equipped with a low ambient condition kit and installed in
the summer, charge 15% more refrigerant.
If the low ambient condition kit is used, turn off the compressor before
power the condensing unit. Only turn on the compressor after the
condensing unit has been powered for 12 hours.