ECHO GT-200R - 10-07 Operator's Manual

Download Operator's manual of Echo GT-200R - 10-07 Trimmer for Free or View it Online on All-Guides.com.

Brand: Echo

Category: Trimmer

Type: Operator's manual for Echo GT-200R - 10-07

Pages: 24 (0.84 Mb)

Download Echo GT-200R - 10-07 Operator's manual

Echo GT-200R - 10-07 Operator's manual - Page 1
1
Echo GT-200R - 10-07 Operator's manual - Page 2
2
Echo GT-200R - 10-07 Operator's manual - Page 3
3
Echo GT-200R - 10-07 Operator's manual - Page 4
4
Echo GT-200R - 10-07 Operator's manual - Page 5
5
Echo GT-200R - 10-07 Operator's manual - Page 6
6
Echo GT-200R - 10-07 Operator's manual - Page 7
7
Echo GT-200R - 10-07 Operator's manual - Page 8
8
Echo GT-200R - 10-07 Operator's manual - Page 9
9
Echo GT-200R - 10-07 Operator's manual - Page 10
10
Echo GT-200R - 10-07 Operator's manual - Page 11
11
Echo GT-200R - 10-07 Operator's manual - Page 12
12
Echo GT-200R - 10-07 Operator's manual - Page 13
13
Echo GT-200R - 10-07 Operator's manual - Page 14
14
Echo GT-200R - 10-07 Operator's manual - Page 15
15
Echo GT-200R - 10-07 Operator's manual - Page 16
16
Echo GT-200R - 10-07 Operator's manual - Page 17
17
Echo GT-200R - 10-07 Operator's manual - Page 18
18
Echo GT-200R - 10-07 Operator's manual - Page 19
19
Echo GT-200R - 10-07 Operator's manual - Page 20
20
Echo GT-200R - 10-07 Operator's manual - Page 21
21
Echo GT-200R - 10-07 Operator's manual - Page 22
22
Echo GT-200R - 10-07 Operator's manual - Page 23
23
Echo GT-200R - 10-07 Operator's manual - Page 24
24
22
STORAGE
Long Term Storage (over 30 days)
WARNING
During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear
of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may
result.
Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte-
nance which includes the following:
1. Store unit in a dry, dust free place, out of the reach of children.
DANGER
Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark.
2. Place the stop switch in the "OFF" position.
3. Remove accumulation of grease, oil, dirt and debris
from exterior of unit.
4. Perform all periodic lubrication and services that are
required.
5. Tighten all the screws and nuts.
6. Drain the fuel tank completely and pull the recoil
starter handle several times to remove fuel from the
carburetor.
7. Remove the spark plug and pour 7 cc (1/4 oz.) of
fresh, clean, two-stroke engine oil into the cylinder
through the spark plug hole.
A. Place a clean cloth over the spark plug hole.
B. Pull the recoil starter handle 2-3 times to distribute
the oil inside the engine.
C. Observe the piston location through the spark plug
hole. Pull the recoil starter handle slowly until the
piston reaches the top of it's travel and leave it
there.
8. Install the spark plug (do not connect spark plug
cable).