EAW DSA230i Owner's Manual

Download Owner's manual of EAW DSA230i Portable Speakers, Speakers for Free or View it Online on All-Guides.com.

Brand: EAW

Category: Portable Speakers , Speakers

Type: Owner's manual

Model: EAW DSA230i , EAW DSA250i

Pages: 52 (2.38 Mb)

Download EAW DSA230i Owner's manual

EAW DSA230i Owner's manual - Page 1
1
EAW DSA230i Owner's manual - Page 2
2
EAW DSA230i Owner's manual - Page 3
3
EAW DSA230i Owner's manual - Page 4
4
EAW DSA230i Owner's manual - Page 5
5
EAW DSA230i Owner's manual - Page 6
6
EAW DSA230i Owner's manual - Page 7
7
EAW DSA230i Owner's manual - Page 8
8
EAW DSA230i Owner's manual - Page 9
9
EAW DSA230i Owner's manual - Page 10
10
EAW DSA230i Owner's manual - Page 11
11
EAW DSA230i Owner's manual - Page 12
12
EAW DSA230i Owner's manual - Page 13
13
EAW DSA230i Owner's manual - Page 14
14
EAW DSA230i Owner's manual - Page 15
15
EAW DSA230i Owner's manual - Page 16
16
EAW DSA230i Owner's manual - Page 17
17
EAW DSA230i Owner's manual - Page 18
18
EAW DSA230i Owner's manual - Page 19
19
EAW DSA230i Owner's manual - Page 20
20
EAW DSA230i Owner's manual - Page 21
21
EAW DSA230i Owner's manual - Page 22
22
EAW DSA230i Owner's manual - Page 23
23
EAW DSA230i Owner's manual - Page 24
24
EAW DSA230i Owner's manual - Page 25
25
EAW DSA230i Owner's manual - Page 26
26
EAW DSA230i Owner's manual - Page 27
27
EAW DSA230i Owner's manual - Page 28
28
EAW DSA230i Owner's manual - Page 29
29
EAW DSA230i Owner's manual - Page 30
30
EAW DSA230i Owner's manual - Page 31
31
EAW DSA230i Owner's manual - Page 32
32
EAW DSA230i Owner's manual - Page 33
33
EAW DSA230i Owner's manual - Page 34
34
EAW DSA230i Owner's manual - Page 35
35
EAW DSA230i Owner's manual - Page 36
36
EAW DSA230i Owner's manual - Page 37
37
EAW DSA230i Owner's manual - Page 38
38
EAW DSA230i Owner's manual - Page 39
39
EAW DSA230i Owner's manual - Page 40
40
EAW DSA230i Owner's manual - Page 41
41
EAW DSA230i Owner's manual - Page 42
42
EAW DSA230i Owner's manual - Page 43
43
EAW DSA230i Owner's manual - Page 44
44
EAW DSA230i Owner's manual - Page 45
45
EAW DSA230i Owner's manual - Page 46
46
EAW DSA230i Owner's manual - Page 47
47
EAW DSA230i Owner's manual - Page 48
48
EAW DSA230i Owner's manual - Page 49
49
EAW DSA230i Owner's manual - Page 50
50
EAW DSA230i Owner's manual - Page 51
51
EAW DSA230i Owner's manual - Page 52
52
5.2.4 CABLING
A CAT-5 or better cable with RJ-45-compatible connectors is required
for each module.
NOTE: Ethernet cable length is limited by specification to 328 ft /
100 m. Longer runs are possible using network hubs or switches as
repeaters or by conversion to fiber optic cable.
5.2.5 AUDIO/COMPUTER INTERFACE
Audio and RS-232 (for DSAPilot control signals) must be converted to
the CobraNet protocol and connected to the network via an RJ-45
Ethernet port. Products that do this are available from several
manufacturers. Your choice will depend, in part, on how many and what
form of audio signals (digital or analog) you need to distribute.
Manufacturers of converters include:
Peavey, QSC, Rane, Symetrix, Whirlwind, and Yamaha.
5.2.6 MODULE INTERFACE
An optional EAW CM-1 CobraNet Interface Card must be installed in
the slot provided in the module. To do this, see installation instructions
that accompany the CM-1.
Connect the PRIMARY RJ-45 Ethernet connector to the Ethernet cable.
The SECONDARY RJ-45 Ethernet connector on the CM-1 is for
connecting to a second, redundant Ethernet network. This would be
designed as a back-up network that automatically takes over in the event
of failure in the primary network.
The digital audio received by the CM-1 connects directly to the loud-
speakers digital signal processing. It is converted back to analog at the
inputs to the internal power amplifiers.
5.2.7 MULTIPLE MODULES
To connect multiple modules to the network, the Ethernet output on the
audio/computer interface must connect to a network switch or hub. A
network switch is normally recommended. The switch must have an
Ethernet port for each module which also means each module in a DSAi
cluster.
A CAT-5 cable is required from the Ethernet port on the CM-1 Interface
Card in each module to its port on the network switch. For networks
requiring cable runs longer than 328 ft / 100 m, a repeater network or
fiber optic cabling is recommended. Do NOT mix hubs and switches on
a repeater network. Network switches and hubs are available through
most computer retailers.
5.2.8 SUPPORT FOR COBRANET / ETHERNET
See Sections 8.4 and 8.5 for support information for Ethernet and CobraNet.
17
CM-1 INTERFACE CARD
4X FLAT
HEAD
SCREWS
Figure 5.2.6 CM-1 Interface Card
(See Installation Instructions with Card)