EAW DX810 Feature Overview Manual

Download Specifications of EAW DX810 Music Mixer, Signal Processors for Free or View it Online on All-Guides.com.

Brand: EAW

Category: Music Mixer , Signal Processors

Type: Specifications for EAW DX810

Pages: 6 (0.5 Mb)

Download EAW DX810 Specifications

EAW DX810 Specifications - Page 1
1
EAW DX810 Specifications - Page 2
2
EAW DX810 Specifications - Page 3
3
EAW DX810 Specifications - Page 4
4
EAW DX810 Specifications - Page 5
5
EAW DX810 Specifications - Page 6
6
DX810
8x10 Digital Matrix Mixer and Signal Processor
EAW Commercial | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 1 of 6
DIGITAL SERIES
EAW Commercial’s DX810 is a DSP-based
digital audio mixer and signal processor. It
is designed for use in a variety of installa-
tions such as churches, courtrooms,
convention centers, and hotels. It provides
eight balanced mic/line inputs and ten bal-
anced outputs allowing true 8x10 mixing.
Each of the eight mic/line input channels
is accessed by means of two Phoenix-type
detachable connectors. Each input is opti-
mized to accept either mic or line-level sig-
nals. Microphone preamplifiers use XDR™
technology to offer studio-grade audio
performance. Phantom power of 48 VDC is
switchable individually on each mic input.
Two auxiliary line-level inputs with trim are
provided. This allows analog signals to be
mixed with the A and B outputs. Master
outputs provide balanced line-level signals
to Phoenix-type connectors.
Each of the ten outputs represents a dis-
crete mix of the eight inputs, resulting in a
true 8x10 mixing matrix with virtual faders
at each crosspoint. Any combination of
gain elements can be assigned to one of
32 groups.
The DX810 offers an intuitive front panel
user interface, consisting of dual-function
LED bar graph meters for each input and
the A and B outputs (all ten outputs can
be monitored in the software interface).
Input meters indicate the presence of
signal prior to any signal processing (pre-
fader). Output A and B meters indicate
actual level at the output (post-fader).
Levels for Mix A and B are set by means of
UP/DOWN pushbuttons dedicated to each
input and output. A MODE button is used to
select between Mix A and B. This allows
adjustment of levels to two mix outputs
from the same set of input controls. A third
function of the MODE button allows the
user to LOCK the front panel controls until
a security unlock code is entered.
Two independent RS232 connectors are
provided, one on the front panel and one
on the rear. This allows for connection
to a computer or control system. A DB25
connector on the rear panel allows for
interfacing with the 10 Logic Inputs and 10
Logic Outputs. Logic I/O enables hardware
control and indication from custom control
panels. All logic inputs and outputs are
programmable in software.
A proprietary remote control bus allows
connection of the optional DX wired
remotes. These remotes can use a variety
of three-conductor cable. Remotes are
available in Volume Control (DX-RVC) and
4-switch versions (DX-SW4), and may be
combined to provide flexible configurations.
The DX810 is supplied with the DX-810-PC
software that allows access to all of the
system’s settings and configurations. The
software provides access to the three-
band input EQ, eight-band parametric
or 31-band graphic EQ for the outputs,
compressors, gates, delays, and crossover
configuration. In addition, the software
allows saving and recalling up to 32 pre-
sets, configuration for 32 control groups,
for input force on/force off functions with
priority, and for the logic input and output
connections. All settings and text labels
are retained in the DX810 as well as stored
on the computer’s local drive.
The DX810 is UL and CE approved and
designed for continuous use in profes-
sional fixed installation systems. An
internal auto-ranging power supply allows
connection to mains voltages from 90-240
VAC at 50/60 Hz. This requires no jumper
or switch setting changes. A 24 VDC input
is provided for applications where backup
battery power is required. Switchover to
backup power is automatic and silent.
FEATURES
·· 32-bit DSP and 24-bit Analog/Digital
Conversion
·· 8 balanced XDR™ Mic/Line inputs with
trim
·· 2 balanced Line inputs direct to mix buses
A and B
·· 10 Independent Mix Buses and balanced
Outputs
·· 2 unbalanced Record Outputs
·· 8 unbalanced Direct Channel Outputs
·· Individual Level/Peak (PPM) metering on
Inputs and Outputs
·· 2-band sweepable High and Low shelving
EQ with a parametric Mid control on each
Input
·· Gating on each Input
·· Solo button on each Input
·· 31-band Graphic EQ or 8-band Parametric
EQ on each Output
·· Fully variable Compressor on each Input
and Output
·· Variable delay on each Output
·· Configurable crossover for up to five
bands
·· 10 Programmable Logic Inputs
·· 10 Programmable Logic Outputs
·· 2 independent RS-232 interface ports
·· 48 VDC Phantom Power switch per input
·· 24 VDC Backup Power input
·· PC software application included
·· Remote Mapping feature provides individ-
ual button assignments for the DX-SW4
remote control
APPLICATIONS
·· Meeting Rooms
·· Hotels
·· Houses of Worship
·· BoardRooms
·· Courtrooms
·· Multizone Paging/Music Systems
·· Multi-Purpose Facilities