• Home
• Brands
• Delta Manuals
• Delta 31-140
• Delta 31-140 Operating Instructions And Parts Manual

Delta 31-140 Operating Instructions And Parts Manual

Download Operating instructions and parts manual of Delta 31-140 Sander for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

7

The machine is heavy, be careful when removing it from the shipping container! Failure to comply

may cause serious injury and/or damage to the sander and/or property!

Your DELTA

®

12” Disc Sander comes packed in a single container. Use a safety strap to avoid tip-over when lifting

machine. Check shipping carton and machine for damage before unpacking.

Open the shipping container. Carefully remove packaging materials, parts and machine from shipping carton. Always

check for and remove protective shipping materials around motors and moving parts. Lay out all parts on a clean

work surface and check that all parts are present and in good condition:

PRODUCT SPECIFICATIONS

FUNCTIONAL DESCRIPTION

The DELTA

®

12” Disc Sander is designed for sanding or polishing flat or beveled surfaces on wood and plastic

materials.

UNPACKING

DESCRIPTION (QUANTITY)

• 12” disc sander (1)

• Dust collection hose with 2 ¼” port

adaptor (1)

• Brake lever assembly (1)

• Miter gauge

• 2.5mm Allen wrench (1)

• 4mm Allen wrench (1)

Compare the items to inventory figures; verify that all items are accounted for before discarding the shipping box.

Report any missing or damaged parts to your distributor or dealer. Prior to tool assembly and use, read this manual

thoroughly to familiarize yourself with proper assembly, maintenance and safety procedures.

Remove any protective materials and coatings from all of the parts and the disc sander. The protective coatings

can be removed by spraying WD-40 on them and wiping it off with a soft cloth. This may need redone several times

before all of the protective coatings are removed completely

If any parts are missing, do not attempt to plug in the power cord and turn “ON" the machine. The

machine should only be turned “ON" after all the parts have been obtained and installed correctly.

Speed: 1725 RPM

Disc Diameter: 12”

Table Tilt: +45° to -45°

Height: 15”

Width: 17 ¼”

Shipping Weight: 81 lbs

Motor: ½ HP, 120 V, 1 Phase, 60 HZ

Table Size: 17 ¼” x 6 ¼”

Dust Collection Outlet: 2 ¼”

Miter Gauge Groove: 3/8” x 3/4"

Length: 17 ¾”

Weight: 72 lbs