Delta 31-140 Operating Instructions And Parts Manual

Download Operating instructions and parts manual of Delta 31-140 Sander for Free or View it Online on All-Guides.com.

Brand: Delta

Category: Sander

Type: Operating instructions and parts manual for Delta 31-140

Pages: 40 (3.98 Mb)

Download Delta 31-140 Operating instructions and parts manual

Delta 31-140 Operating instructions and parts manual - Page 1
1
Delta 31-140 Operating instructions and parts manual - Page 2
2
Delta 31-140 Operating instructions and parts manual - Page 3
3
Delta 31-140 Operating instructions and parts manual - Page 4
4
Delta 31-140 Operating instructions and parts manual - Page 5
5
Delta 31-140 Operating instructions and parts manual - Page 6
6
Delta 31-140 Operating instructions and parts manual - Page 7
7
Delta 31-140 Operating instructions and parts manual - Page 8
8
Delta 31-140 Operating instructions and parts manual - Page 9
9
Delta 31-140 Operating instructions and parts manual - Page 10
10
Delta 31-140 Operating instructions and parts manual - Page 11
11
Delta 31-140 Operating instructions and parts manual - Page 12
12
Delta 31-140 Operating instructions and parts manual - Page 13
13
Delta 31-140 Operating instructions and parts manual - Page 14
14
Delta 31-140 Operating instructions and parts manual - Page 15
15
Delta 31-140 Operating instructions and parts manual - Page 16
16
Delta 31-140 Operating instructions and parts manual - Page 17
17
Delta 31-140 Operating instructions and parts manual - Page 18
18
Delta 31-140 Operating instructions and parts manual - Page 19
19
Delta 31-140 Operating instructions and parts manual - Page 20
20
Delta 31-140 Operating instructions and parts manual - Page 21
21
Delta 31-140 Operating instructions and parts manual - Page 22
22
Delta 31-140 Operating instructions and parts manual - Page 23
23
Delta 31-140 Operating instructions and parts manual - Page 24
24
Delta 31-140 Operating instructions and parts manual - Page 25
25
Delta 31-140 Operating instructions and parts manual - Page 26
26
Delta 31-140 Operating instructions and parts manual - Page 27
27
Delta 31-140 Operating instructions and parts manual - Page 28
28
Delta 31-140 Operating instructions and parts manual - Page 29
29
Delta 31-140 Operating instructions and parts manual - Page 30
30
Delta 31-140 Operating instructions and parts manual - Page 31
31
Delta 31-140 Operating instructions and parts manual - Page 32
32
Delta 31-140 Operating instructions and parts manual - Page 33
33
Delta 31-140 Operating instructions and parts manual - Page 34
34
Delta 31-140 Operating instructions and parts manual - Page 35
35
Delta 31-140 Operating instructions and parts manual - Page 36
36
Delta 31-140 Operating instructions and parts manual - Page 37
37
Delta 31-140 Operating instructions and parts manual - Page 38
38
Delta 31-140 Operating instructions and parts manual - Page 39
39
Delta 31-140 Operating instructions and parts manual - Page 40
40
12
RECOMMENDED MAINTENANCE
NOTE: Disconnect machine from power source before
performing any maintenance.
LUBRICATION
All bearings are sealed and permanently lubricated. No
further lubrication is needed.
ROUTINE INSPECTION
It is recommended that you periodically inspect your
spindle sander as a precautionary action. During this
time, check for the following:
• Inspect all hardware, fittings and fasteners that may
have loosened due to vibration and re-tighten as
needed.
• Check for dust and/or wood particles that may have
accumulated on or in the machine. Check all dust
collection fittings – re-tighten as needed.
• Inspect the ON/OFF SWITCH for damage before each
use. Periodically inspect the power cord and plug for
damage. If necessary replace the power cord and the
plug at the first signs of visible damage.
REPLACING THE SANDING DISC
Make certain machine is
disconnected from power source.
• To remove sanding disc (A), simply peel old abrasive
disc from machine as shown.
• To install a new abrasive disc, make sure the disc
plate (B) is clean, dry, and free from any oil, grease, or
old adhesive.
• Peel back half the adhesive backing from the new
disc and slide between the table and disc plate so
that the half without the backing is aligned with the
top half of the disc plate.
• Press top half of sanding disc onto top half of disc
plate.
• Manually rotate disc plate one-half turn, remove
remainder of adhesive backing and firmly press
sanding disc onto disc plate.
Make certain the sanding disc is
securely in position before connecting
machine to a power source.
ACCESSORIES
A complete line of accessories is available from your DELTA
®
Supplier, DELTA
®
Factory Service Centers, and
DELTA
®
Factory Service Centers, and DELTA
®
Authorized Service Centers. Please visit our Web Site www.
DeltaMachinery.com for an online catalog or for the name or your nearest supplier.
Since accessories other than those offered by DELTA
®
have not been tested with this product,
use of such accessories could be hazardous. For safest operation, only DELTA
®
recommended
accessories should be used with this product.
Five Year Limited New Product Warranty
DELTA
®
will repair or replace, at its expense and at its option, any new DELTA
®
machine, machine part, or machine accessory which in normal
use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA
®
factory service
center or authorized service station with proof of purchase of the product within five years and provides DELTA
®
with reasonable opportunity
to verify the alleged defect by inspection. For all refurbished DELTA
®
product, the warranty period is 180 days. DELTA
®
will not be responsible
for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone
other than an authorized DELTA
®
service facility or representative. Under no circumstances will DELTA
®
be liable for incidental or consequential
damages resulting from defective products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty is DELTA
®
s sole warranty and sets forth the customer’s exclusive remedy,
with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are
expressly disclaimed by DELTA
®
. For further detail of warranty coverage and warranty repair information, visit www.DeltaMachinery.com or call
1-800-223-7278. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.
WARRANTY
To register your tool for warranty service visit our website at www.DeltaMachinery.com.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in the packaging, call the local company or see website for warranty
information.