• Home
• Brands
• Dell Manuals
• Dell PowerConnect 2216
• Dell PowerConnect 2216 Product Specifications

Dell PowerConnect 2216 Product Specifications

Download Technical specifications update of Dell PowerConnect 2216 Switch for Free or View it Online on All-Guides.com.

1

2

www.dell.com | support.dell.com

0K5672A00

Dell™ PowerConnect™ 2200/2300 Series Ethernet Switches

Introduction

This document describes changes to the technical specifications of the PowerConnect 2200/2300

series Ethernet switches. This information replaces and supercedes that found in the

Dell

PowerConnect 2216/2224/2324 Switches User’s Guide

. Where any differences exist in the

specifications or procedures between the two documents, the information in this document is

more accurate.

Product Specifications

• PowerConnect 2216

– Provides 16 ports supporting 10/100Base-T Ethernet.

– All ports support full- or half-duplex mode and PAUSE frames.

• PowerConnect 2224

– Provides 24 ports supporting 10/100Base-T Ethernet.

– All ports support full- or half-duplex mode and PAUSE frames.

• PowerConnect 2324

– Provides 24 ports supporting 10/100Base-T Ethernet and an additional 2 ports supporting

1000Base-T Ethernet.

– The 10/100Base-T ports support full- or half-duplex mode; the 1000Base-T ports support

full-duplex mode only.

– The 10/100Base-T ports support PAUSE frames; the 1000Base-T ports do not support

PAUSE frames.

Front-Panel Indicators

1000Base-T Ports Link/Activity (SPD/LNK/ACT) LED (PowerConnect 2324 only)

• Steady green — A 1000 Mbps link has been established, but no data is being transmitted

or received.

• Blinking green — A 1000 Mbps link has been established and data is being transmitted

or received.

• Off — No link has been established.

NOTE: No link will will be detected if a 10/100Base-T device is connected to a 1000Base-T port (ports 25

and 26) on the PowerConnect 2324 switch.

February 2004

K5672A00.fm Page 1 Friday, February 20, 2004 3:45 PM