Siemens 563-004 Installation Instructions

Download Installation instructions of Siemens 563-004 Transceiver for Free or View it Online on All-Guides.com.

Brand: Siemens

Category: Transceiver

Type: Installation instructions

Model: Siemens 563-004 , Siemens 563-007 , Siemens 563-008

Pages: 4

Download Siemens 563-004 Installation instructions

Siemens 563-004 Installation instructions - Page 1
1
Siemens 563-004 Installation instructions - Page 2
2
Siemens 563-004 Installation instructions - Page 3
3
Siemens 563-004 Installation instructions - Page 4
4
Installation Instructions
Document No. 563-002
January 12, 2007
Wireless Fiel
d Level Network Transceiver (FLNX)
(Version 1.x)
Channel
Network I.D.
WLAN0001R1
24 Vac 1.2VA
E H N
F L N
Figure 1. Wireless Field Level Network Transceiver
(FLNX).
Product Description
The Wireless Field Level Network Transceiver
(FLNX) is mounted at or near the FLN device
and is powered by 24 Vac. The antenna c an be
mounted directly to the radio or mounted remotely for
installations where the location of the FLNX causes
the antenna to be shielded—for example, w hen the
FLNX is mounted inside a TEC enclosure.
Product Numbers
563-004 Wireless Field Level
Network Transceiver (FLNX)
(Version 1.x)
563-007 Direct M ou nt Antenn a
563-008 Remote M ou nt Antenna
Transceivers do not come with antennas.
Antennas must be ord ered separate ly.
Accessories
563-027
Pre-termin ated Cable Kit
(Includes two 14” cables:
power and comm unication )
Recommended for factory mounting
Warning/Caution Notations
WARNING:
Personal injury/loss of life m ay occur if you
do not follow the procedures as specied.
CAUTION:
Equipment damage or loss of data may
occur if you do not follow the procedures
as specied.
Expected Installation Time
10 minutes
Required Tools and Materials
Electro-static discharge wrist strap
•Smallat-blade screwdriver
Cordless drill/d river set
Prerequisites
All wiring must conform to NEC and local
codes and regu lations.
24 Vac Class II power source is available.
Metal Oxide Varistors (MOVs) must be used
for TECs that switch high voltage devices. For
details, see the FSN for Terminal Equipment
Controllers (T ECs) Fa iling when Switching
High Voltage Powered Devices.
Any application specic h ardware or device
is insta lle d.
I
tem Nu m ber: 563-002, Rev. BA
P
age 1 of 4