Dell PowerVault 3000i System Installation Manual
Download System installation manual of Dell PowerVault MD3000i Enclosure, Network Storage Server for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Enclosure , Network Storage Server , Server , Software , Speaker System , Storage
Type: System installation manual
Model: Dell PowerVault MD3000i , Dell PowerVault 3000i
Pages: 68 (0.57 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
44 Setting Up Your iSCSI Storage Array
Step 4: Configure Host Access
This step specifies which host servers will access virtual disks on the storage array. You should perform
this step:
• before mapping virtual disks to host servers
• any time you connect new host servers to the storage array
1
Launch MD Storage Manager.
2
Click on the
Configure
tab, then select
Configure Host Access (Manual)
.
3
At
Enter host name
, enter the host server to be available to the storage array for virtual disk mapping.
This can be an informal name, not necessarily a name used to identify the host server to the network.
4
In the
Select host type
drop-down menu, select the host type.
Click
Next
.
5
If your iSCSI initiator shows up in the list of
Known iSCSI initiators
, make sure it is highlighted and
click
Add
and then
Next.
Otherwise, click
New
and enter the
iSCSI initiator name
.
– In Windows, the iSCSI initiator name can be found on the
General
tab of the
iSCSI Initiator
Properties
window.
– In Linux, the iSCSI initiator name can be found in the
etc/initiatorname.iscsi file
or by using the
iscsi-iname
command.
Click
Next
.
6
Choose whether or not the host server will be part of a host server group that will share access to the
same virtual disks as other host servers. Select
Yes
only if the host is part of a Microsoft cluster.
Click
Next
.
7
Click
Finish
.