Dell PowerVault MD3620f Command Line Interface Manual
Download Command line interface manual of Dell PowerVault MD3600f Desktop, Disk array system for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Desktop , Disk array system , Software , Storage
Type: Command line interface manual
Model: Dell PowerVault MD3600f , Dell PowerVault MD3620f
Pages: 328 (6.84 Mb)
Download Dell PowerVault MD3600f Command line interface manual
286 Script Commands
Show Storage Array Unconfigured iSCSI Initiators
This command returns a list of initiators that have been detected by the
storage array but are not yet configured into the storage array topology.
Syntax
show storageArray unconfiguredIscsiInitiators
Parameters
None.
Show Storage Array Unreadable Sectors
This command returns a table of the addresses of all of the sectors in the
storage array that cannot be read. The table is organized with column
headings for the following information:
• Virtual disk user label
• Logical unit number (LUN)
• Accessible by (host or host group)
• Date/time
• Virtual disk-relative logical block address (hexadecimal format –
0xnnnnnnnn)
• Physical disk location (enclosure t, slot s)
• Physical disk-relative logical block address (hexadecimal format –
0xnnnnnnnn)
•Failure type
The data is sorted first by the virtual disk user label and second by the logical
block address (LBA). Each entry in the table corresponds to a single sector.
Syntax
show storageArray unreadableSectors
Parameters
None.
book.book Page 286 Wednesday, June 8, 2011 12:20 PM