Dell PowerVault MD3620f Command Line Interface Manual
Download Command line interface manual of Dell PowerVault MD3600f Desktop, Disk array system for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Desktop , Disk array system , Software , Storage
Type: Command line interface manual
Model: Dell PowerVault MD3600f , Dell PowerVault MD3620f
Pages: 328 (6.84 Mb)
Download Dell PowerVault MD3600f Command line interface manual
Script Commands 173
Create Remote Replication
NOTE: This command valid only with Fibre Channel storage arrays.
This command creates both the primary virtual disk and the secondary virtual
disk for a remote replication pair. This command also sets the write mode
(Synchronous or Asynchronous) and the synchronization priority.
Syntax
create remoteReplication primary=
”primaryVirtualDiskName”
secondary=”secondaryVirtualDiskName”
(remoteStorageArrayName=”storageArrayName” |
remoteStorageArrayWwn=”wwID”)
[remotePassword=”password”
syncPriority=(highest | high | medium | low |
lowest)
autoResync=(enabled | disabled)
writeOrder=(preserved | notPreserved)
writeMode=(synchronous | asynchronous)]
Parameters
Parameter Description
primary The name of an existing virtual disk on the local
storage array that you want to use for the primary
virtual disk. Enclose the primary virtual disk name in
double quotation marks (“ ”).
secondary The name of an existing virtual disk on the remote
storage array that you want to use for the secondary
virtual disk. Enclose the secondary virtual disk name
in double quotation marks (“ ”).
remoteStorageArrayNam
e
The name of the remote storage array. Enclose the
remote storage array name in double quotation
marks (“ ”).
remoteStorageArrayWwn The World Wide Identifier (WWID) of the remote
storage array. Enclose the WWID in double
quotation marks (“ ”).
book.book Page 173 Wednesday, June 8, 2011 12:20 PM