American Innovations Allegro MX User Manual Supplement

Download User manual supplement of American Innovations Allegro MX Other for Free or View it Online on All-Guides.com.

American Innovations Allegro MX User manual supplement - Page 1
1
American Innovations Allegro MX User manual supplement - Page 2
2
American Innovations Allegro MX User manual supplement - Page 3
3
American Innovations Allegro MX User manual supplement - Page 4
4
Allegro MX
User Guide Supplement
Using RFID
May 30, 2012
Page 1 of 4
Turn on the RFID reader by pressing and holding the power
button for two seconds (Figure 2).
When the RFID reader has powered up, it will beep twice
and both the device status LED and RFID status LED will
flash green two times (Figure 2). The device status LED
will then flash green and magenta indicating the RFID
reader is in Bluetooth connectable mode.
Create a Bluetooth partnership:
1
While the RFID reader is in Bluetooth connectable mode
(flashing magenta), press and release the power button to
place the device in Bluetooth discoverable mode.
The device status LED flashes blue during Bluetooth discoverable
mode to indicate the RFID reader is waiting for a Bluetooth physical
connection to be established. The device will return to the previous
mode if no connection is established within the discovery time-out
(60 seconds), or will indicate a physical connection if a Bluetooth
connection is established.
2
2
USB Port
Figure 1. USB Port on RFID Reader
Power Button
Device Status LED
Action Button
RFID Status LED
Stylus Tip
Figure 2. RFID Reader
1
Plug the provided USB cable in the USB port on the end
of the RFID reader (Figure 1).
Plug the other end of the USB cable in a USB port on
your computer.
2
Charge the RFID reader:
1
This document is a supplement and is intended to be used in conjunction with American Innovations’ Allegro MX User Guide version
4.4.0 or higher. The following information explains how to use the Allegro MX Annual/Periodic Survey (PS) software with the wireless
Bluetooth
®
RFID reader and tags provided by AI. Topics in this document include those in the following list:
If you need assistance with the Allegro MX or RFID reader and tags, contact Technical Services at 1-800-229-3404 (select 1, then press
2), or send an email to [email protected].
charging the RFID reader
creating a Bluetooth partnership
setting up the Allegro PS survey file for RFID
adding an RFID number to a facility site record
frequently asked questions (FAQs)