Dell PowerEdge C8000 Owner's Manual
Download Hardware owner's manual of Dell PowerEdge C8000 Desktop, Server for Free or View it Online on All-Guides.com.
254 Installing System Components
System Board
Removing the System Board
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1
Remove the sled from the enclosure. See "Removing a Sled" on page 141.
2
Open the sled. See "Removing the Front and Back Sled Covers" on
page 161 or "Removing the Sled Cover" on page 166.
3
Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 210.
4
Remove the heat sink. See "Removing a Heat Sink" on page 212.
5
Remove the processor. See "Removing a Processor" on page 215.
6
Remove the memory modules. See "Removing Memory Modules" on
page 221.
7
If installed, remove the SAS mezzanine card, Infiniband mezzanine card,
or 10GbE mezzanine card. See "Removing the SAS Mezzanine Card" on
page 223, "Removing the Infiniband Mezzanine Card" on page 229, or
"Removing the 10 GbE Mezzanine Card" on page 233.
8
Remove the SD card reader. See "Removing the SD Card Reader" on
page 237.
9
Remove the SD card reader support bracket. See "Removing the SD Card
Reader Support Bracket" on page 240.
10
Remove the internal hard-drives. See "Removing a Hard-Drive Carrier
Located on the Sled Tray" on page 154.
11
Remove the hard-drive tray. See "Removing the Hard-Drive Tray" on
page 158.
12
Remove the interposer extender. See "Removing the Interposer Extender"
on page 242.
13
Remove the node power distribution board. See "Removing the Node
Power Distribution Board" on page 246.