Dell PowerEdge C8000 Owner's Manual
Download Hardware owner's manual of Dell PowerEdge C8000 Desktop, Server for Free or View it Online on All-Guides.com.
204 Installing System Components
4
Close the sled. See "Installing the Sled Cover" on page 168.
5
Replace the sled. See "Installing a Sled" on page 142.
Removing the Back GPGPU Card Riser
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1
Remove the sled from the enclosure. See "Removing a Sled" on page 141.
2
Remove the back GPGPU card assembly. See "Removing the Back GPGPU
Card Assembly" on page 194.
3
Disconnect the power cable from the back GPGPU riser. See Figure 3-51
4
Remove the two screws securing the back GPGPU card riser. See
Figure 3-51.
5
Pull the back GPGPU card riser away from the sled cover. See Figure 3-51.
Figure 3-51. Removing and Installing the Back GPGPU Card Riser