Dell PowerEdge C8000 Owner's Manual
Download Hardware owner's manual of Dell PowerEdge C8000 Desktop, Server for Free or View it Online on All-Guides.com.
168 Installing System Components
Figure 3-27. Removing and Installing the Sled Cover
Installing the Sled Cover
NOTE: It is recommended that you always use a static mat and static strap while
working on components in the interior of the system.
1
Connect the twin axial cable to the system board. See Figure 3-27.
2
Replace the screw securing the twin axial cable to the system board. See
Figure 3-27.
3
Connect the emergency throttling cable labeled NPDB for GPGPU to the
node power distribution board on the sled tray. See Figure 3-26.
Make sure the emergency throttling cable labeled PS-ON is connected to
the node power distribution board on the sled cover. See Figure 3-26.
4
Route the emergency throttling cable properly and secure it to the sled
cover’s retaining clip.
1 sled cover screws (4) 2 sled cover
3 twin axial cable screw 4 twin axial cable
5 cable retaining clip