Dell PowerEdge C8000 Owner's Manual
Download Hardware owner's manual of Dell PowerEdge C8000 Desktop, Server for Free or View it Online on All-Guides.com.
Installing System Components 165
Figure 3-25. Removing and Installing the Front Cover
Installing the Front and Back Sled Covers
NOTE: It is recommended that you always use a static mat and static strap while
working on components in the interior of the system.
1
Check that all cable connections are secure.
2
Place the front cover on top of the sled tray, aligning the notches in the
front cover with the corresponding tabs in the sled tray. See Figure 3-25.
3
If an expansion card is installed, make sure the expansion card riser is
firmly seated.
4
If a hard-drive backplane is installed, connect all cables to the backplane
and proceed to next step.
5
Replace the four screws securing the front cover. See Figure 3-25.
6
Connect all cables to the hard-drive backplane and press down on the
locking tab to secure the cables. For sled without add-on cards, see
Figure 3-22. For sled with add-on cards, see Figure 3-23 or Figure 3-24.
7
Align the notches in the back cover with the corresponding tabs in the sled
tray.
1 screws (4) 2 front cover