Dell PowerEdge T610 Hardware Manual
Download Hardware owner's manual of Dell External OEMR T610 Computer Hardware, Desktop for Free or View it Online on All-Guides.com.
Brand: Dell
Category: Computer Hardware , Desktop , Server
Type: Hardware owner's manual
Model: Dell External OEMR T610 , Dell PowerEdge T610
Pages: 206 (10.77 Mb)
Installing System Components 85
If the drive has been online, the green
activity/
fault indicator will flash as
the drive is powered down. When the drive indicators are off, the drive is
ready for removal.
3 Press the button on the front of the drive carrier and open the drive
carrier release handle to release the drive. See
Figure 3-5
.
4
Slide the hard drive out until it is free of the drive bay.
5
Insert a drive blank in the vacated drive bay. See "
Installing a Hard-Drive
Blank."
CAUTION: To maintain proper system cooling, all empty hard-drive bays must
have drive blanks installed.
6
Install the front bezel. See "Installing the Front Bezel."
Installing a Hot-Swap Hard Drive
CAUTION: When installing a hard drive, ensure that the adjacent drives are fully
installed. Inserting a hard-drive carrier and attempting to lock its handle next to a
partially installed carrier can damage the partially installed carrier's shield spring
and make it unusable.
CAUTION: Ensure that your operating system supports hot-swap drive
installation. See the documentation supplied with your operating system.
1 Remove the front bezel. See "Removing the Front Bezel
."
2
If a drive blank is present in the bay, remove it. See "
Installing a Hard-
Drive Blank
."
book.book Page 85 Tuesday, September 15, 2009 10:08 AM