Dell POWERCONNECT 5524 Getting Started Manual

Download Getting started manual of Dell 5524P Switch for Free or View it Online on All-Guides.com. This version of Dell 5524P Manual compatible with such list of devices, as: 5524P, 5548P, POWERCONNECT 5524, PowerConnect 5548

Brand: Dell

Category: Switch

Type: Getting started manual

Model: Dell 5524P , Dell 5548P , Dell POWERCONNECT 5524 , Dell PowerConnect 5548

Pages: 20 (1.48 Mb)

Download Dell 5524P Getting started manual

Dell 5524P Getting started manual - Page 1
1
Dell 5524P Getting started manual - Page 2
2
Dell 5524P Getting started manual - Page 3
3
Dell 5524P Getting started manual - Page 4
4
Dell 5524P Getting started manual - Page 5
5
Dell 5524P Getting started manual - Page 6
6
Dell 5524P Getting started manual - Page 7
7
Dell 5524P Getting started manual - Page 8
8
Dell 5524P Getting started manual - Page 9
9
Dell 5524P Getting started manual - Page 10
10
Dell 5524P Getting started manual - Page 11
11
Dell 5524P Getting started manual - Page 12
12
Dell 5524P Getting started manual - Page 13
13
Dell 5524P Getting started manual - Page 14
14
Dell 5524P Getting started manual - Page 15
15
Dell 5524P Getting started manual - Page 16
16
Dell 5524P Getting started manual - Page 17
17
Dell 5524P Getting started manual - Page 18
18
Dell 5524P Getting started manual - Page 19
19
Dell 5524P Getting started manual - Page 20
20
12
Stacking
Manual Assignment
To assign unit IDs to the switches in the stack, do the following for each
switch in the stack:
1
Connect the switch to the terminal, as described in "Connecting the
Switch to the Terminal".
2
Turn on the switch to begin auto boot and press
Return
or
Esc
to abort and
enter the
Start Up
menu.
3
Select
Stack menu
to open the
Stack Menu
.
4
Select
Set unit stack id
.
Enter either a Unit ID or 0. 0 indicates that the
unit ID will be assigned automatically.
NOTE:
The entire stack should be installed, as shown in Figure 2-1, before powering
up the switches.
For more information on stacking, see the Dell PowerConnect 5500 Series User
Guide on the Documentation CD.
Startup Menu
[1]Download Software
[2]Erase Flash File
[3]Password Recovery Procedure
[4]Set Terminal Baud-Rate
[5]Stack menu
[6]Back
[1]Show unit stack id
[2]Set unit stack id
[3]Back
ContaxGS.book Page 12 Friday, August 20, 2010 1:53 PM