Dell 4400 Software Manual
Download Update manual of Dell 4400 Desktop, Laptop for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
support.dell.comwww.dell.com
002XPJ A01
P/N 02XPJ Rev. A01
August 2000
Dell™ PowerEdge™ 4400 Systems
RAID Memory Update
This document updates information contained in your Dell PowerEdge 4400 system documentation.
System Memory Requirements
Before you upgrade your system to support the PowerEdge Expandable RAID Controller (PERC) 3/Di
redundant array of independent disks (RAID) controller, or before you upgrade the RAID cache mem-
ory in your system, you must ensure that your system has enough system memory installed. If you
are installing 64 megabytes (MB) of RAID cache memory, you must have a minimum of 128 MB of
system memory. If you are installing 128 MB of RAID cache memory, or upgrading from 64 MB to
128 MB of RAID cache memory, you must have a minimum of 256 MB of system memory.
Upgrading the System BIOS and the PERC 3/Di
RAID Controller Firmware
Before you install the RAID controller cache memory module, determine the current versions of your
system’s basic input/output system (BIOS) and the PERC 3/Di RAID controller firmware. The BIOS
messages displayed during the power-on self test (POST) will include version numbers of existing
components.
The BIOS installed on your system must be version A03 or later to support 128 MB of RAID cache
memory. The PERC 3/Di RAID controller firmware must be at least the version on the bootable
diskette provided with the upgrade kit.
To upgrade the system BIOS, use the upgrade diskette, or download the latest version from the Dell
PowerEdge 4400 file download page at http://support.dell.com.
To upgrade the RAID controller firmware, follow the instructions in the readme file on the upgrade
diskette.