ADEMCO 737-10 Installation Instructions
Download Installation instructions of ADEMCO 737-10 Speakers for Free or View it Online on All-Guides.com. This version of ADEMCO 737-10 Manual compatible with such list of devices, as: 737-10, 737-20, 738-10, 738-20
Brand: ADEMCO
Category: Speakers
Type: Installation instructions
Model: ADEMCO 737-10 , ADEMCO 737-20 , ADEMCO 738-10 , ADEMCO 738-20
Pages: 3
1
2
3
FLUSH MOUNT
No. 737-10 or 737-20:
a) Select desired location in
which to install speaker.
b) Be certain there are no buiit-
in obstructions and that there is
adequate depth for speaker.
c) Use template as a guide in
cutting out speaker opening.
d) if screws are to be used for
mounting grille, set front of
grille face down on flat surface
and punch out (4) starter holes
where required. Use large nail
or other punch type device.
e) if adhesive is used for mount-
ing, be certain the adhesive is of
the type that does not damage
plastic.
1) Connect wires to terminals
and mount per illustration at
right and WIRING section on
page 3.
SURFACE MOUNT
No. 737-10 only:
(No. 737-20: n n o t
be surface mounted
as indicated here)
a) Select desired location on
which to surface mount the
speaker,
b) No cutout is required. Use
surface mount point@to locate
and drill the four mounting hoies
for the surface mount brackets;
use a 3/32” drill. Partially mount
screws into holes.
c) Attach brackets to surface
using the slotted feet. Brackets
should be positioned for the
desired speaker tiit...up or
down. Tighten screws.
d) Connect wire to speaker ter-
minals and mount speaker and
grille to brackets per illustration
at right and WIRING section on
page 3.
-10 or
6
FLUSH
USE (2) LONG
SCREWS FOR
SURFACE -
Q’K 1
/’
5 Y3--
/
w-s----------
313
www.PDF-Zoo.com